Metal Roof Installation cost: Bellevue vs Puyallup (2026)
Metal roof installation costs about the same in Bellevue and Puyallup in 2026 — roughly $25,950 in each.
Bellevue WA
Typically around $25,950
Puyallup WA
Typically around $25,950
Bellevue vs Puyallup: full breakdown
| Factor | Bellevue | Puyallup |
|---|---|---|
| Typical 2026 cost | $25,950 | $25,950 |
| Estimated range | $15,800–$36,050 | $15,800–$36,050 |
| Labor index (vs US) | ×1.19 | ×1.19 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $15,550 | $15,550 |
| Materials/equipment | $10,400 | $10,400 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Basically a tie — focus on the contractor
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Bellevue vs Puyallup
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Bellevue | Puyallup |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,050–$21,750 | $11,050–$21,750 |
| Standing-seam steel | $21,750–$42,000 | $21,750–$42,000 |
| Aluminum | $17,000–$33,700 | $17,000–$33,700 |
| Copper | $36,050–$71,800 | $36,050–$71,800 |
| Zinc | $33,700–$65,850 | $33,700–$65,850 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Bellevue vs Puyallup
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bellevue | Puyallup |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,850–$19,400 | $9,850–$19,400 |
| 1,500 sq ft (15 squares) | $13,450–$27,750 | $13,450–$27,750 |
| 2,000 sq ft (20 squares) | $15,800–$36,050 | $15,800–$36,050 |
| 2,500 sq ft (25 squares) | $19,400–$43,200 | $19,400–$43,200 |
| 3,000+ sq ft (30 squares) | $22,950–$50,350 | $22,950–$50,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Bellevue vs Puyallup
Is metal roof installation cheaper in Bellevue or Puyallup?
metal roof installation costs about the same in both — roughly $25,950 in each city.
Why does metal roof installation cost more in Puyallup than Bellevue?
The main driver is local labor rates: Puyallup's labor index is 1.19 versus 1.19 in Bellevue. Climate zone (mixed vs mixed) also shift the total.
How much is metal roof installation in Bellevue, WA?
In Bellevue, metal roof installation typically runs $15,800–$36,050 in 2026, with most homeowners paying around $25,950.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $41.1/hr in the Seattle-Tacoma-Bellevue area versus $41.1/hr around Seattle-Tacoma-Bellevue (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Bellevue and Puyallup: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Bellevue and Puyallup — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik