Metal Roof Installation cost: Bellevue vs Marysville (2026)
The two metros aren't quite in sync on metal roof installation: Bellevue sits 15% above Marysville, or roughly $25,950 versus $22,600 — about $3,350 apart.
Bellevue WA
Typically around $25,950
Marysville WA
Lower costTypically around $22,600
Bellevue vs Marysville: full breakdown
| Factor | Bellevue | Marysville |
|---|---|---|
| Typical 2026 cost | $25,950 | $22,600 |
| Estimated range | $15,800–$36,050 | $13,750–$31,400 |
| Labor index (vs US) | ×1.19 | ×1.04 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $300 |
| Labor share | $15,550 | $13,550 |
| Materials/equipment | $10,400 | $9,050 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
How much should this gap actually matter?
A 15% gap is meaningful on a project this size — about $3,350. That's real money, but it's often within reach of off-season timing and a tighter apples-to-apples bid in Bellevue.
Metal roof installation by type: Bellevue vs Marysville
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Bellevue | Marysville |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,050–$21,750 | $9,600–$18,950 |
| Standing-seam steel | $21,750–$42,000 | $18,950–$36,550 |
| Aluminum | $17,000–$33,700 | $14,800–$29,300 |
| Copper | $36,050–$71,800 | $31,400–$62,450 |
| Zinc | $33,700–$65,850 | $29,300–$57,300 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Bellevue vs Marysville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bellevue | Marysville |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,850–$19,400 | $8,600–$16,900 |
| 1,500 sq ft (15 squares) | $13,450–$27,750 | $11,700–$24,150 |
| 2,000 sq ft (20 squares) | $15,800–$36,050 | $13,750–$31,400 |
| 2,500 sq ft (25 squares) | $19,400–$43,200 | $16,900–$37,600 |
| 3,000+ sq ft (30 squares) | $22,950–$50,350 | $20,000–$43,800 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
No BLS metro wage series for Marysville; we use Washington regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Bellevue vs Marysville
Is metal roof installation cheaper in Bellevue or Marysville?
Marysville wins on price: metal roof installation runs about $22,600 there versus $25,950 in Bellevue, a gap of roughly $3,350 (15%) as of 2026.
Why does metal roof installation cost more in Bellevue than Marysville?
Labor rates explain most of it — 1.19 in Bellevue vs 1.04 in Marysville. A mixed climate versus mixed, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Bellevue, WA?
In Bellevue, metal roof installation typically runs $15,800–$36,050 in 2026, with most homeowners paying around $25,950.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Bellevue and Marysville, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Rarely. The $3,350 difference is real but one-time, and you can often close most of it in Bellevue by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik