Metal Roof Installation cost: Atlanta vs Savannah (2026)
Atlanta runs 2% lower than Savannah for metal roof installation — expect around $21,550 in Atlanta against $21,900 in Savannah, a difference of about $350.
Atlanta GA
Lower costTypically around $21,550
Savannah GA
Typically around $21,900
Atlanta vs Savannah: full breakdown
| Factor | Atlanta | Savannah |
|---|---|---|
| Typical 2026 cost | $21,550 | $21,900 |
| Estimated range | $13,150–$29,950 | $13,350–$30,450 |
| Labor index (vs US) | ×0.96 | ×0.98 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $275 |
| Labor share | $12,950 | $13,150 |
| Materials/equipment | $8,600 | $8,750 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
How much should this gap actually matter?
That 2% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Metal roof installation by type: Atlanta vs Savannah
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Atlanta | Savannah |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,200–$18,100 | $9,300–$18,350 |
| Standing-seam steel | $18,100–$34,900 | $18,350–$35,450 |
| Aluminum | $14,100–$27,950 | $14,350–$28,400 |
| Copper | $29,950–$59,650 | $30,450–$60,600 |
| Zinc | $27,950–$54,700 | $28,400–$55,550 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Atlanta vs Savannah
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Atlanta | Savannah |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,200–$16,100 | $8,300–$16,350 |
| 1,500 sq ft (15 squares) | $11,150–$23,050 | $11,350–$23,400 |
| 2,000 sq ft (20 squares) | $13,150–$29,950 | $13,350–$30,450 |
| 2,500 sq ft (25 squares) | $16,100–$35,900 | $16,350–$36,450 |
| 3,000+ sq ft (30 squares) | $19,050–$41,800 | $19,400–$42,500 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Atlanta-Sandy Springs-Roswell metro · about 7% below the US average installer wage.
No BLS metro wage series for Savannah; we use Georgia regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Atlanta vs Savannah
Is metal roof installation cheaper in Atlanta or Savannah?
Yes — Savannah costs more. Expect around $21,900 for metal roof installation there against $21,550 in Atlanta, about $350 (2%) apart in 2026.
Why does metal roof installation cost more in Savannah than Atlanta?
Labor rates explain most of it — 0.98 in Savannah vs 0.96 in Atlanta. A hot climate versus hot accounts for the rest.
How much is metal roof installation in Atlanta, GA?
Atlanta homeowners can expect $13,150 to $29,950 for metal roof installation in 2026, with $21,550 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Atlanta and Savannah: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $350 is a real gap, but it's a one-time cost you can partly offset in Savannah with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik