Roofing · Savannah, GA
How much does metal roof installation cost in Savannah, GA? (2026)
In Savannah, metal roof installation runs $13,350–$30,450, with most paying around $21,900 — about 2% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $21,900
- Typical cost
- $21,900
- Labor vs US
- −4%
- Climate
- Hot
- Local permit
- $275
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Savannah
- Most Savannah homeowners land around $21,900 for metal roof installation, within a $13,350–$30,450 range that sits about 2% above the national average.
- Savannah labor runs −4% versus the US average — the main reason the local price differs from the national figure.
- A Roofing permit in Savannah runs about $275 — it's already folded into the estimate above.
- Schedule the replacement early — this typically holds up 40–70 years, and an emergency swap costs full price.
- Late spring to early fall (dry, 45–85°F) is the low-price window — about 5–10% under peak rates.
What goes into the price in Savannah
A typical Savannah metal roof installation of $21,900 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Savannah 2026 range |
|---|---|
| Materials & equipmentHardware and supplies for the job; national pricing applies almost everywhere you go. | $5,250 – $12,050 |
| Labor & installationCrew time for removal, installation and startup; local labor rates drive most of the swing here. | $7,825 – $18,125 |
| Permit & feesWhat this city's building department charges for a Roofing permit. | $275 |
| Total installed cost | $13,350 – $30,450 |
Split from the Savannah estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Savannah
- Expect labor here to run 4% below the national norm (based on price levels for the Savannah metro area) — that's what lowers the total.
- Savannah's hot climate increases typical metal roof installation cost by about 3% versus a neutral climate.
- A Roofing permit in Savannah costs around $275, included above.
Metal Roof Installation cost by roof size in Savannah
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Savannah 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,300 – $16,350 |
| 1,500 sq ft (15 squares) | $11,350 – $23,400 |
| 2,000 sq ft (20 squares) | $13,350 – $30,450 |
| 2,500 sq ft (25 squares) | $16,350 – $36,450 |
| 3,000+ sq ft (30 squares) | $19,400 – $42,500 |
National size ranges localized to Savannah labor and climate.
Metal Roof Installation cost by type in Savannah
| Corrugated steel (exposed fastener) | $9,350 – $18,450 |
| Standing-seam steel | $18,450 – $35,600 |
| Aluminum | $14,400 – $28,550 |
| Copper | $30,550 – $60,850 |
| Zinc | $28,550 – $55,800 |
Adjusted to Savannah from national type-level ranges.
Metal Roof Installation cost by efficiency in Savannah
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $8,300 – $18,350 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $13,350 – $30,450 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $25,400 – $50,550 |
Labor vs. materials in Savannah
Install crew, removal, permit & startup — the part Savannah rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $21,900 Savannah project; your mix varies with scope.
How we estimate it
| National range | $13,000 – $30,000 |
| Savannah labor adjustment | ×0.98 |
| hot climate factor | ×1.03 |
| Local permit | +$275 |
| Savannah estimate | $13,350 – $30,450 |
Promo prices vs. the real cost
A headline roofing price means little without a defined scope — these are the numbers marketing tends to lean on:
- Free roof inspection$0 — it's a sales visit
- Per-square teaser priceadvertised low; varies by pitch & material
- Financing offers$0 down · low APR
Additional metal roof installation costs to budget for
These hit some bids and skip others. The deciding factors are your home's condition, layout and what the crew finds once work begins.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Metal panels or standing-seam system
- Labor, cleanup and permit
- Underlayment, fasteners and trim
- Tear-off of the old roof
What affects the cost
- Whether existing roof can be overlaid
- Roof complexity and number of penetrations
- Metal: steel, aluminum, copper or zinc
- Panel type (exposed-fastener vs standing seam)
Ways to save on metal roof installation in Savannah
- Compare lifetime cost, not just the install price
- Steel standing seam balances cost and longevity
- Some insurers discount metal and impact-rated roofs
- Metal's 40–70 yr life lowers lifetime cost
How long does metal roof installation last in Savannah?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Savannah
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Savannah?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Savannah, GA
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Savannah, GA labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,850–$11,750 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,850–$15,700 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,650–$31,350 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,600–$39,200 | $450/yr |
Per-square ranges are national installed benchmarks localized to Savannah, GA labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Savannah
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Why metal roof installation quotes vary — and how to compare them fairly
Big gaps between bids come down to scope far more often than greed. This breaks down the levers and how to force a like-for-like comparison.
Why a quote looks high (or low)
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
Get an apples-to-apples bid
- Specify tear-off vs. overlay so all bids match.
- Ask how deck/sheathing repairs are priced if rot is found.
- Compare the workmanship warranty, not just the material warranty.
- Verify the contractor is licensed, insured and local, with recent references.
Questions to ask Savannah Roofing pros
Before you pick, make each contractor answer the same things — gaps in their replies tell you as much as the price.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Savannah
How much does metal roof installation cost in Savannah, GA?
metal roof installation in Savannah runs $13,350–$30,450 as of 2026, with $21,900 the figure most homeowners actually land on. That range already accounts for Savannah's labor rates, its hot climate and local permit costs.
Is metal roof installation more expensive in Savannah than average?
Savannah is about 2% higher than the national average, mainly because local labor runs at an index of 0.98 relative to the US average., plus a local Roofing permit running about $275.
Do I need a permit for metal roof installation in Savannah?
Yes — Savannah typically requires a Roofing permit for this job, running about $275. That cost is already folded into the estimate above.
What affects metal roof installation cost the most?
Installing a metal roof — higher upfront cost, long lifespan and strong durability. Your hot climate zone plays a part, but equipment/material grade, the size and complexity of the home, and local labor rates weigh in just as heavily.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Savannah using the BEA Regional Price Parity labor index (×0.98 here), the IECC hot-climate factor (×1.03) and a typical local permit fee (≈$275). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Savannah metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Savannah
Homeowners in Savannah often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Savannah
Browse local 2026 costs for every home project in Savannah, GA.