Metal Roof Installation cost: Ashburn vs Rockford (2026)
The two metros aren't quite in sync on metal roof installation: Ashburn sits 20% above Rockford, or roughly $25,700 versus $21,400 — about $4,300 apart.
Ashburn IL
Typically around $25,700
Rockford IL
Lower costTypically around $21,400
Ashburn vs Rockford: full breakdown
| Factor | Ashburn | Rockford |
|---|---|---|
| Typical 2026 cost | $25,700 | $21,400 |
| Estimated range | $15,650–$35,700 | $13,050–$29,750 |
| Labor index (vs US) | ×1.14 | ×0.95 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $250 |
| Labor share | $15,400 | $12,850 |
| Materials/equipment | $10,300 | $8,550 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
How much should this gap actually matter?
That's a real $4,300 difference (20%) on metal roof installation — worth factoring in, though off-season timing and a tighter quote in Ashburn can narrow it.
Metal roof installation by type: Ashburn vs Rockford
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Ashburn | Rockford |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,900–$21,550 | $9,100–$17,950 |
| Standing-seam steel | $21,550–$41,600 | $17,950–$34,700 |
| Aluminum | $16,850–$33,350 | $14,000–$27,800 |
| Copper | $35,700–$71,100 | $29,750–$59,300 |
| Zinc | $33,350–$65,200 | $27,800–$54,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Ashburn vs Rockford
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Ashburn | Rockford |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,750–$19,200 | $8,100–$16,000 |
| 1,500 sq ft (15 squares) | $13,300–$27,450 | $11,050–$22,900 |
| 2,000 sq ft (20 squares) | $15,650–$35,700 | $13,050–$29,750 |
| 2,500 sq ft (25 squares) | $19,200–$42,800 | $16,000–$35,650 |
| 3,000+ sq ft (30 squares) | $22,750–$49,900 | $18,950–$41,550 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
No BLS metro wage series for Rockford; we use Illinois regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Ashburn vs Rockford
Is metal roof installation cheaper in Ashburn or Rockford?
In 2026, metal roof installation is cheaper in Rockford at about $21,400, versus $25,700 in Ashburn — a difference of about $4,300 (20%).
Why does metal roof installation cost more in Ashburn than Rockford?
Labor rates explain most of it — 1.14 in Ashburn vs 0.95 in Rockford. A cold climate versus cold, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Ashburn, IL?
Expect to pay $15,650 to $35,700 for metal roof installation in Ashburn in 2026, averaging around $25,700.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Ashburn and Rockford: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $4,300 is a real gap, but it's a one-time cost you can partly offset in Ashburn with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik