Metal Roof Installation cost: Ashburn vs Aurora (2026)
Ashburn and Aurora are a near-perfect match on metal roof installation cost in 2026, both landing around $25,700.
Ashburn IL
Typically around $25,700
Aurora IL
Typically around $25,700
Ashburn vs Aurora: full breakdown
| Factor | Ashburn | Aurora |
|---|---|---|
| Typical 2026 cost | $25,700 | $25,700 |
| Estimated range | $15,650–$35,700 | $15,650–$35,700 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $300 |
| Labor share | $15,400 | $15,400 |
| Materials/equipment | $10,300 | $10,300 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
No real cost edge either way
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Ashburn vs Aurora
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Ashburn | Aurora |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,900–$21,550 | $10,900–$21,550 |
| Standing-seam steel | $21,550–$41,600 | $21,550–$41,600 |
| Aluminum | $16,850–$33,350 | $16,850–$33,350 |
| Copper | $35,700–$71,100 | $35,700–$71,100 |
| Zinc | $33,350–$65,200 | $33,350–$65,200 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Ashburn vs Aurora
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Ashburn | Aurora |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,750–$19,200 | $9,750–$19,200 |
| 1,500 sq ft (15 squares) | $13,300–$27,450 | $13,300–$27,450 |
| 2,000 sq ft (20 squares) | $15,650–$35,700 | $15,650–$35,700 |
| 2,500 sq ft (25 squares) | $19,200–$42,800 | $19,200–$42,800 |
| 3,000+ sq ft (30 squares) | $22,750–$49,900 | $22,750–$49,900 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Ashburn vs Aurora
Is metal roof installation cheaper in Ashburn or Aurora?
metal roof installation costs about the same in both — roughly $25,700 in each city.
Why does metal roof installation cost more in Aurora than Ashburn?
The main driver is local labor rates: Aurora's labor index is 1.14 versus 1.14 in Ashburn. Climate zone (cold vs cold) also shift the total.
How much is metal roof installation in Ashburn, IL?
Expect to pay $15,650 to $35,700 for metal roof installation in Ashburn in 2026, averaging around $25,700.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $38.1/hr around Chicago-Naperville-Elgin versus $38.1/hr near Chicago-Naperville-Elgin. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Ashburn and Aurora, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Ashburn and Aurora — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik