Metal Roof Installation cost: Alpharetta vs Savannah (2026)
Budget-wise, metal roof installation in Alpharetta ($21,550) runs 2% less than in Savannah ($21,900), a roughly $350 spread.
Alpharetta GA
Lower costTypically around $21,550
Savannah GA
Typically around $21,900
Alpharetta vs Savannah: full breakdown
| Factor | Alpharetta | Savannah |
|---|---|---|
| Typical 2026 cost | $21,550 | $21,900 |
| Estimated range | $13,150–$29,950 | $13,350–$30,450 |
| Labor index (vs US) | ×0.96 | ×0.98 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $275 |
| Labor share | $12,950 | $13,150 |
| Materials/equipment | $8,600 | $8,750 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Is the price difference a dealbreaker?
A 2% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Alpharetta vs Savannah
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Alpharetta | Savannah |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,200–$18,100 | $9,300–$18,350 |
| Standing-seam steel | $18,100–$34,900 | $18,350–$35,450 |
| Aluminum | $14,100–$27,950 | $14,350–$28,400 |
| Copper | $29,950–$59,650 | $30,450–$60,600 |
| Zinc | $27,950–$54,700 | $28,400–$55,550 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Alpharetta vs Savannah
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Alpharetta | Savannah |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,200–$16,100 | $8,300–$16,350 |
| 1,500 sq ft (15 squares) | $11,150–$23,050 | $11,350–$23,400 |
| 2,000 sq ft (20 squares) | $13,150–$29,950 | $13,350–$30,450 |
| 2,500 sq ft (25 squares) | $16,100–$35,900 | $16,350–$36,450 |
| 3,000+ sq ft (30 squares) | $19,050–$41,800 | $19,400–$42,500 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Atlanta-Sandy Springs-Roswell metro · about 7% below the US average installer wage.
No BLS metro wage series for Savannah; we use Georgia regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Alpharetta vs Savannah
Is metal roof installation cheaper in Alpharetta or Savannah?
Alpharetta comes out ahead here, at roughly $21,550 for metal roof installation compared with $21,900 in Savannah — a 2% ($350) gap as of 2026.
Why does metal roof installation cost more in Savannah than Alpharetta?
Savannah's higher labor index (0.98 vs 0.96 in Alpharetta) is the biggest factor, with the hot/hot climate split playing a smaller role.
How much is metal roof installation in Alpharetta, GA?
Expect to pay $13,150 to $29,950 for metal roof installation in Alpharetta in 2026, averaging around $21,550.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Alpharetta and Savannah: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Rarely. The $350 difference is real but one-time, and you can often close most of it in Savannah by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik