Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Albany vs Savannah (2026)

The two metros aren't quite in sync on metal roof installation: Albany sits 7% below Savannah, or roughly $20,550 versus $21,900 — about $1,350 apart.

Albany GA

Lower cost
$12,500 $28,550

Typically around $20,550

Savannah GA

$13,350 $30,450

Typically around $21,900

Savannah costs about $1,350 (7%) more than Albany for metal roof installation, largely because of the local labor rate gap.
Side by side

Albany vs Savannah: full breakdown

FactorAlbanySavannah
Typical 2026 cost$20,550$21,900
Estimated range$12,500–$28,550$13,350–$30,450
Labor index (vs US)×0.92×0.98
Climate zoneHotHot
Climate factor×1.03×1.03
Local permit$250$275
Labor share$12,350$13,150
Materials/equipment$8,200$8,750

Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.

The verdict

Is the price difference a dealbreaker?

7% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.

By type

Metal roof installation by type: Albany vs Savannah

We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.

TypeAlbanySavannah
Corrugated steel (exposed fastener)$8,750$17,250$9,300$18,350
Standing-seam steel$17,250$33,250$18,350$35,450
Aluminum$13,450$26,650$14,350$28,400
Copper$28,550$56,850$30,450$60,600
Zinc$26,650$52,150$28,400$55,550

Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

By size

Metal roof installation by roof size: Albany vs Savannah

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeAlbanySavannah
1,000 sq ft (10 squares)$7,800$15,350$8,300$16,350
1,500 sq ft (15 squares)$10,650$21,950$11,350$23,400
2,000 sq ft (20 squares)$12,500$28,550$13,350$30,450
2,500 sq ft (25 squares)$15,350$34,200$16,350$36,450
3,000+ sq ft (30 squares)$18,200$39,900$19,400$42,500

These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.

Best time to buy

Cheapest time for metal roof installation in either city

The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The do-it-right case

Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.

Our take

A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.

FAQ

Albany vs Savannah

Is metal roof installation cheaper in Albany or Savannah?

Albany comes out ahead here, at roughly $20,550 for metal roof installation compared with $21,900 in Savannah — a 7% ($1,350) gap as of 2026.

Why does metal roof installation cost more in Savannah than Albany?

Labor rates explain most of it — 0.98 in Savannah vs 0.92 in Albany. A hot climate versus hot, along with differing permit costs, accounts for the rest.

How much is metal roof installation in Albany, GA?

Expect to pay $12,500 to $28,550 for metal roof installation in Albany in 2026, averaging around $20,550.

When is the cheapest time to buy metal roof installation — and does it differ by city?

It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Albany and Savannah (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.

Should I choose where to live based on metal roof installation cost?

That would be a stretch. $1,350 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Savannah can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik