Heat Pump Water Heater Installation cost: Murray vs Provo (2026)
Murray and Provo are a near-perfect match on heat pump water heater installation cost in 2026, both landing around $3,500.
Murray UT
Typically around $3,500
Provo UT
Typically around $3,500
Murray vs Provo: full breakdown
| Factor | Murray | Provo |
|---|---|---|
| Typical 2026 cost | $3,500 | $3,500 |
| Estimated range | $2,450–$4,550 | $2,450–$4,500 |
| Labor index (vs US) | ×0.98 | ×0.97 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.02 | ×1.02 |
| Local permit | $150 | $150 |
| Labor share | $1,950 | $1,950 |
| Materials/equipment | $1,550 | $1,550 |
Treat these as 2026 localized estimates for heat pump water heater installation, not quotes from a contractor.
No real cost edge either way
This is a statistical tie on heat pump water heater installation cost, so let contractor reputation and project timing decide, not geography.
Heat pump water heater installation by type: Murray vs Provo
We localize each heat pump water heater installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Murray | Provo |
|---|---|---|
| 40–50 gallon | $2,450–$3,950 | $2,450–$3,900 |
| 65–66 gallon | $2,950–$4,350 | $2,950–$4,300 |
| 80 gallon | $3,450–$5,050 | $3,400–$5,000 |
Treat these as 2026 localized estimates for heat pump water heater installation, not quotes from a contractor.
Heat pump water heater installation by tank capacity: Murray vs Provo
Hybrid heat pump water heaters use a storage tank, so they're sized in gallons by household — but because they recover heat efficiently, a 50-gallon hybrid often serves a home that needed a 65–80 gallon electric tank.
| Size | Murray | Provo |
|---|---|---|
| 40 gal (1–2 people) | $2,250–$3,750 | $2,250–$3,700 |
| 50 gal (2–4 people) | $2,450–$4,150 | $2,450–$4,100 |
| 65 gal (4–5 people) | $2,850–$4,350 | $2,850–$4,300 |
| 80 gal (5+ people) | $3,150–$4,550 | $3,150–$4,500 |
Heat pump water heater installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What water heaters pros earn in each metro
Since labor accounts for around 55% of what a heat pump water heater installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
No BLS metro wage series for Provo; we use Utah regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for heat pump water heater installation in either city
Why winter is expensive: it's failure season, when cold groundwater stresses old units and emergency calls flood in. A 10+ year-old tank replaced proactively, before it dies, skips that spike completely.
Tank or tankless — and what should you budget?
Tank, tankless or heat-pump — the format you pick shapes the bill today and the utility bill for years after. Our editors weigh the trade-offs.
The heat-pump case
A hybrid heat-pump unit carries the steepest sticker price and draws the largest utility rebates on the market, then pays that back by pulling warmth from the surrounding air instead of generating heat — operating cost falls to a fraction of a standard electric tank's. The condition is location: it wants a roomy, temperate spot like a garage or basement to perform.
The simple-swap case
When money is the constraint and the existing tank has kept up with the household, dropping in the same fuel type and capacity is the least disruptive move. No venting rework, no new gas line, no panel space to find — a plumber can pull the old unit and set the new one before lunch.
The tankless case
Tankless costs more upfront and may need a gas-line or electrical upgrade, but it lasts longer, never runs out of hot water and trims standby energy loss — strongest for larger households planning to stay put.
The cheapest to install and the cheapest to run are rarely the same unit. Tanks win the first, heat-pumps win the second where the install spot allows, and tankless sits between them — trading a higher upfront number for a supply that never quits.
Murray vs Provo
Is heat pump water heater installation cheaper in Murray or Provo?
heat pump water heater installation costs about the same in both — roughly $3,500 in each city.
Why does heat pump water heater installation cost more in Provo than Murray?
Labor rates explain most of it — 0.97 in Provo vs 0.98 in Murray. A cold climate versus cold accounts for the rest.
How much is heat pump water heater installation in Murray, UT?
heat pump water heater installation in Murray runs $2,450–$4,550 as of 2026 — most jobs land near $3,500.
When is the cheapest time to buy heat pump water heater installation — and does it differ by city?
It doesn't vary by location — Spring and early fall is the discount window in both Murray and Provo (roughly 5–10% off), while deep winter (failure season) tends to be the most expensive in either city.
Should I choose where to live based on heat pump water heater installation cost?
No — the cost is essentially identical between Murray and Provo. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare heat pump water heater installation in other cities
Updated June 2026 · By Serhat Özçelik