Heat Pump Installation cost: Murray vs West Valley City (2026)
Murray and West Valley City are a near-perfect match on heat pump installation cost in 2026, both landing around $9,750.
Murray UT
Typically around $9,750
West Valley City UT
Typically around $9,750
Murray vs West Valley City: full breakdown
| Factor | Murray | West Valley City |
|---|---|---|
| Typical 2026 cost | $9,750 | $9,750 |
| Estimated range | $6,900–$12,550 | $6,900–$12,550 |
| Labor index (vs US) | ×0.98 | ×0.98 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.05 | ×1.05 |
| Local permit | $200 | $200 |
| Labor share | $5,850 | $5,850 |
| Materials/equipment | $3,900 | $3,900 |
All figures are 2026 localized planning estimates for heat pump installation — get an actual quote before you commit.
No real cost edge either way
The two metros are effectively a wash for heat pump installation — pick on contractor quality and timing, not location.
Heat pump installation by type: Murray vs West Valley City
Below, each heat pump installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Murray | West Valley City |
|---|---|---|
| Air-source (ducted) | $7,900–$11,550 | $7,900–$11,550 |
| Ductless mini-split | $4,850–$12,550 | $4,850–$12,550 |
| Geothermal (ground-source) | $20,800–$28,000 | $20,800–$28,000 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national heat pump installation range for local labor, climate and permits.
Heat pump installation by home size: Murray vs West Valley City
Heat pumps are sized in tons like AC (roughly one ton per 500–600 sq ft), but cold-climate models may be sized up for heating. Ductless mini-splits are priced per zone instead.
| Size | Murray | West Valley City |
|---|---|---|
| 1,000 sq ft (≈2 tons / 1–2 zones) | $5,350–$9,450 | $5,350–$9,450 |
| 1,500 sq ft (≈2.5 tons) | $6,400–$11,000 | $6,400–$11,000 |
| 2,000 sq ft (≈3 tons) | $6,900–$12,550 | $6,900–$12,550 |
| 2,500 sq ft (≈4 tons) | $8,950–$14,600 | $8,950–$14,600 |
| 3,000+ sq ft (≈5 tons) | $10,500–$17,700 | $10,500–$17,700 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national heat pump installation range for local labor, climate and permits.
What hvac pros earn in each metro
About 60% of a heat pump installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for heat pump installation in either city
Crews are busiest — and priciest — exactly when it's hottest or coldest, since that's when systems fail under load. Book in the mild months and you're negotiating from a position of choice, not a broken furnace.
How much should you really budget for HVAC in 2026?
Get the sizing wrong or the efficiency tier mismatched to your climate, and the price drifts fast in either direction. Below, a look at how those choices — plus brand markup — shape the real number.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The longevity case
The most expensive variable on the quote isn't the logo — it's whether the system is sized right and installed well. Oversize a premium unit and it short-cycles, wears fast and underperforms; commission a correctly sized mid-tier one and keep up the annual service, and it simply lasts longer. Spend on the installation, not the badge.
Skip the brand debate. A correctly sized system, an efficiency tier that fits your climate, and a properly commissioned install will save you more than any label ever could.
Murray vs West Valley City
Is heat pump installation cheaper in Murray or West Valley City?
Practically identical — expect around $9,750 for heat pump installation whichever city you're in.
Why does heat pump installation cost more in West Valley City than Murray?
The main driver is local labor rates: West Valley City's labor index is 0.98 versus 0.98 in Murray. Climate zone (cold vs cold) also shift the total.
How much is heat pump installation in Murray, UT?
Expect to pay $6,900 to $12,550 for heat pump installation in Murray in 2026, averaging around $9,750.
Do hvac pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $30.1/hr in the Salt Lake City-Murray area versus $30.1/hr around Salt Lake City-Murray (BLS metro wage data). Since labor is roughly 60% of a heat pump installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy heat pump installation — and does it differ by city?
No, the seasonal pattern is the same in Murray and West Valley City: book during Spring and fall (Mar–May, Sep–Oct) for about 5–15% in savings. Peak summer and mid-winter is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on heat pump installation cost?
Not on this basis — Murray and West Valley City cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare heat pump installation in other cities
Updated June 2026 · By Serhat Özçelik