Heat Pump Installation cost: Murray vs Provo (2026)
Budget-wise, heat pump installation in Murray ($9,750) runs 2% more than in Provo ($9,600), a roughly $150 spread.
Murray UT
Typically around $9,750
Provo UT
Lower costTypically around $9,600
Murray vs Provo: full breakdown
| Factor | Murray | Provo |
|---|---|---|
| Typical 2026 cost | $9,750 | $9,600 |
| Estimated range | $6,900–$12,550 | $6,800–$12,400 |
| Labor index (vs US) | ×0.98 | ×0.97 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.05 | ×1.05 |
| Local permit | $200 | $200 |
| Labor share | $5,850 | $5,750 |
| Materials/equipment | $3,900 | $3,850 |
These are 2026 planning figures for heat pump installation, localized to each city — not formal quotes.
How much should this gap actually matter?
A 2% difference on heat pump installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Heat pump installation by type: Murray vs Provo
We localize each heat pump installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Murray | Provo |
|---|---|---|
| Air-source (ducted) | $7,900–$11,550 | $7,850–$11,400 |
| Ductless mini-split | $4,850–$12,550 | $4,800–$12,400 |
| Geothermal (ground-source) | $20,800–$28,000 | $20,550–$27,700 |
All figures are 2026 localized planning estimates for heat pump installation — get an actual quote before you commit.
Heat pump installation by home size: Murray vs Provo
Heat pumps are sized in tons like AC (roughly one ton per 500–600 sq ft), but cold-climate models may be sized up for heating. Ductless mini-splits are priced per zone instead.
| Size | Murray | Provo |
|---|---|---|
| 1,000 sq ft (≈2 tons / 1–2 zones) | $5,350–$9,450 | $5,300–$9,350 |
| 1,500 sq ft (≈2.5 tons) | $6,400–$11,000 | $6,300–$10,900 |
| 2,000 sq ft (≈3 tons) | $6,900–$12,550 | $6,800–$12,400 |
| 2,500 sq ft (≈4 tons) | $8,950–$14,600 | $8,850–$14,450 |
| 3,000+ sq ft (≈5 tons) | $10,500–$17,700 | $10,400–$17,500 |
All figures are 2026 localized planning estimates for heat pump installation — get an actual quote before you commit.
What hvac pros earn in each metro
Labor is about 60% of a heat pump installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
No BLS metro wage series for Provo; we use Utah regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for heat pump installation in either city
A furnace or AC that dies mid-heat-wave gets replaced at whatever the on-call crew charges. One that gets swapped in April or October gets a competitive, unhurried quote instead.
How much should you really budget for HVAC in 2026?
Get the sizing wrong or the efficiency tier mismatched to your climate, and the price drifts fast in either direction. Below, a look at how those choices — plus brand markup — shape the real number.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The budget-first case
In a temperate region the smart move is to size the job correctly with a Manual J and take the base efficiency tier. A system that spends most days coasting can't recover the cost of a high-SEER2 compressor, because the savings only show up under heavy load you don't put on it. Match the equipment to how little you actually run it, not to the brochure's top number.
If there's one takeaway, it's this: sizing and install quality decide whether an HVAC system performs, not the badge on the box. Get the load calculation right, match efficiency to climate, and take the rebates on offer.
Murray vs Provo
Is heat pump installation cheaper in Murray or Provo?
In 2026, heat pump installation is cheaper in Provo at about $9,600, versus $9,750 in Murray — a difference of about $150 (2%).
Why does heat pump installation cost more in Murray than Provo?
Labor rates explain most of it — 0.98 in Murray vs 0.97 in Provo. A cold climate versus cold accounts for the rest.
How much is heat pump installation in Murray, UT?
Expect to pay $6,900 to $12,550 for heat pump installation in Murray in 2026, averaging around $9,750.
When is the cheapest time to buy heat pump installation — and does it differ by city?
Timing doesn't change by city here — Spring and fall (Mar–May, Sep–Oct) is the cheapest window in both Murray and Provo, saving roughly 5–15%. Avoid peak summer and mid-winter in either location, when emergency replacements push prices up.
Should I choose where to live based on heat pump installation cost?
Probably not. Yes, $150 is a real gap, but it's a one-time cost you can partly offset in Murray with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare heat pump installation in other cities
Updated June 2026 · By Serhat Özçelik