Furnace Replacement cost: Indianapolis vs Murray (2026)
In 2026, furnace replacement is about 5% more expensive in Indianapolis than in Murray. Most homeowners pay around $6,250 in Indianapolis versus $5,950 in Murray — a gap of roughly $300.
Indianapolis IN
Typically around $6,250
Murray UT
Lower costTypically around $5,950
Indianapolis vs Murray: full breakdown
| Factor | Indianapolis | Murray |
|---|---|---|
| Typical 2026 cost | $6,250 | $5,950 |
| Estimated range | $4,450–$8,050 | $4,250–$7,600 |
| Labor index (vs US) | ×1.04 | ×0.98 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $200 | $200 |
| Labor share | $3,750 | $3,550 |
| Materials/equipment | $2,500 | $2,400 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
Is the gap worth worrying about?
A 5% difference on furnace replacement is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Furnace replacement by type: Indianapolis vs Murray
Every furnace replacement type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Indianapolis | Murray |
|---|---|---|
| Gas furnace | $4,350–$7,900 | $4,100–$7,500 |
| High-efficiency gas furnace | $3,900–$7,900 | $3,700–$7,500 |
| Electric furnace | $2,450–$5,250 | $2,300–$4,950 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Furnace replacement by home size: Indianapolis vs Murray
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Indianapolis | Murray |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,350–$6,000 | $3,150–$5,700 |
| 1,500 sq ft (≈68,000 BTU) | $3,900–$6,900 | $3,700–$6,550 |
| 2,000 sq ft (≈90,000 BTU) | $4,450–$8,050 | $4,250–$7,600 |
| 2,500 sq ft (≈110,000 BTU) | $5,150–$9,150 | $4,850–$8,650 |
| 3,000 sq ft (≈130,000 BTU) | $5,800–$10,300 | $5,500–$9,750 |
| 3,500+ sq ft (≈150,000 BTU) | $6,450–$11,400 | $6,150–$10,800 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
What hvac pros earn in each metro
Labor is about 60% of a furnace replacement bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Indianapolis-Carmel-Greenwood metro · about 6% above the US average installer wage.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Crews are busiest — and priciest — exactly when it's hottest or coldest, since that's when systems fail under load. Book in the mild months and you're negotiating from a position of choice, not a broken furnace.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The longevity case
Brand is a footnote; sizing and install quality write the story. A right-sized mid-tier system that's properly commissioned and serviced once a year will outlive an oversized premium unit that short-cycles itself to an early grave. Put the money into the crew and the setup rather than the nameplate.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The costly errors in an HVAC job are a bad load calculation and a sloppy install — not the logo you chose. Size it with a real Manual J, let your climate set the efficiency tier, and claim whatever rebates you still qualify for.
Indianapolis vs Murray
Is furnace replacement cheaper in Indianapolis or Murray?
Murray wins on price: furnace replacement runs about $5,950 there versus $6,250 in Indianapolis, a gap of roughly $300 (5%) as of 2026.
Why does furnace replacement cost more in Indianapolis than Murray?
The main driver is local labor rates: Indianapolis's labor index is 1.04 versus 0.98 in Murray. Climate zone (cold vs cold) also shift the total.
How much is furnace replacement in Indianapolis, IN?
In Indianapolis, furnace replacement typically runs $4,450–$8,050 in 2026, with most homeowners paying around $6,250.
Do hvac pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $33/hr in the Indianapolis-Carmel-Greenwood area and $30.1/hr in Salt Lake City-Murray. Given labor is around 60% of a furnace replacement job's cost, that gap explains most of the price spread.
When is the cheapest time to buy furnace replacement — and does it differ by city?
No, the seasonal pattern is the same in Indianapolis and Murray: book during Spring and fall (Mar–May, Sep–Oct) for about 5–15% in savings. Peak summer and mid-winter is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on furnace replacement cost?
That would be a stretch. $300 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Indianapolis can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik