Furnace Replacement cost: Indianapolis vs Medford (2026)
Budget-wise, furnace replacement in Indianapolis ($6,250) runs 7% more than in Medford ($5,850), a roughly $400 spread.
Indianapolis IN
Typically around $6,250
Medford OR
Lower costTypically around $5,850
Indianapolis vs Medford: full breakdown
| Factor | Indianapolis | Medford |
|---|---|---|
| Typical 2026 cost | $6,250 | $5,850 |
| Estimated range | $4,450–$8,050 | $4,150–$7,500 |
| Labor index (vs US) | ×1.04 | ×1.04 |
| Climate zone | Cold | Mixed |
| Climate factor | ×1.08 | ×1 |
| Local permit | $200 | $225 |
| Labor share | $3,750 | $3,500 |
| Materials/equipment | $2,500 | $2,350 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
Is the gap worth worrying about?
At 7%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for furnace replacement — focus on the contractor, not the city.
Furnace replacement by type: Indianapolis vs Medford
Below, each furnace replacement option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Indianapolis | Medford |
|---|---|---|
| Gas furnace | $4,350–$7,900 | $4,050–$7,350 |
| High-efficiency gas furnace | $3,900–$7,900 | $3,650–$7,350 |
| Electric furnace | $2,450–$5,250 | $2,300–$4,900 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
Furnace replacement by home size: Indianapolis vs Medford
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Indianapolis | Medford |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,350–$6,000 | $3,150–$5,600 |
| 1,500 sq ft (≈68,000 BTU) | $3,900–$6,900 | $3,650–$6,450 |
| 2,000 sq ft (≈90,000 BTU) | $4,450–$8,050 | $4,150–$7,500 |
| 2,500 sq ft (≈110,000 BTU) | $5,150–$9,150 | $4,800–$8,500 |
| 3,000 sq ft (≈130,000 BTU) | $5,800–$10,300 | $5,400–$9,550 |
| 3,500+ sq ft (≈150,000 BTU) | $6,450–$11,400 | $6,050–$10,600 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What hvac pros earn in each metro
With labor making up about 60% of a furnace replacement job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Indianapolis-Carmel-Greenwood metro · about 6% above the US average installer wage.
No BLS metro wage series for Medford; we use Oregon regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
A furnace or AC that dies mid-heat-wave gets replaced at whatever the on-call crew charges. One that gets swapped in April or October gets a competitive, unhurried quote instead.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The longevity case
Brand is a footnote; sizing and install quality write the story. A right-sized mid-tier system that's properly commissioned and serviced once a year will outlive an oversized premium unit that short-cycles itself to an early grave. Put the money into the crew and the setup rather than the nameplate.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The budget-first case
Run a Manual J load calculation, then buy the standard tier — 80% AFUE, 14.3 SEER2 — and stop there. Where summers are short and winters are gentle, the equipment idles most of the year, so premium efficiency never gets enough runtime to earn back its price. Paying for SEER2 you'll rarely tap is the classic way a mild-climate homeowner overspends.
Climate decides the efficiency tier; a proper load calculation decides everything else. Nail both, stack the rebates you can, and you've sidestepped the two mistakes — wrong size, rushed install — that actually inflate the lifetime cost.
Indianapolis vs Medford
Is furnace replacement cheaper in Indianapolis or Medford?
Yes — Indianapolis costs more. Expect around $6,250 for furnace replacement there against $5,850 in Medford, about $400 (7%) apart in 2026.
Why does furnace replacement cost more in Indianapolis than Medford?
Labor rates explain most of it — 1.04 in Indianapolis vs 1.04 in Medford. A cold climate versus mixed, along with differing permit costs, accounts for the rest.
How much is furnace replacement in Indianapolis, IN?
furnace replacement in Indianapolis runs $4,450–$8,050 as of 2026 — most jobs land near $6,250.
When is the cheapest time to buy furnace replacement — and does it differ by city?
It doesn't vary by location — Spring and fall (Mar–May, Sep–Oct) is the discount window in both Indianapolis and Medford (roughly 5–15% off), while peak summer and mid-winter tends to be the most expensive in either city.
Should I choose where to live based on furnace replacement cost?
Probably not. Yes, $400 is a real gap, but it's a one-time cost you can partly offset in Indianapolis with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik