Furnace Replacement cost: Evansville vs Hammond (2026)
Evansville and Hammond are a near-perfect match on furnace replacement cost in 2026, both landing around $5,650.
Evansville IN
Typically around $5,650
Hammond IN
Typically around $5,650
Evansville vs Hammond: full breakdown
| Factor | Evansville | Hammond |
|---|---|---|
| Typical 2026 cost | $5,650 | $5,650 |
| Estimated range | $4,050–$7,250 | $4,050–$7,250 |
| Labor index (vs US) | ×0.93 | ×0.93 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $200 | $200 |
| Labor share | $3,400 | $3,400 |
| Materials/equipment | $2,250 | $2,250 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Basically a tie — focus on the contractor
Neither metro has a cost edge on furnace replacement — spend your decision-making energy on the contractor, not the location.
Furnace replacement by type: Evansville vs Hammond
Every furnace replacement type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Evansville | Hammond |
|---|---|---|
| Gas furnace | $3,950–$7,150 | $3,950–$7,150 |
| High-efficiency gas furnace | $3,550–$7,150 | $3,550–$7,150 |
| Electric furnace | $2,200–$4,750 | $2,200–$4,750 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Furnace replacement by home size: Evansville vs Hammond
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Evansville | Hammond |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,000–$5,450 | $3,000–$5,450 |
| 1,500 sq ft (≈68,000 BTU) | $3,550–$6,250 | $3,550–$6,250 |
| 2,000 sq ft (≈90,000 BTU) | $4,050–$7,250 | $4,050–$7,250 |
| 2,500 sq ft (≈110,000 BTU) | $4,650–$8,250 | $4,650–$8,250 |
| 3,000 sq ft (≈130,000 BTU) | $5,250–$9,300 | $5,250–$9,300 |
| 3,500+ sq ft (≈150,000 BTU) | $5,850–$10,300 | $5,850–$10,300 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
Cheapest time for furnace replacement in either city
Crews are busiest — and priciest — exactly when it's hottest or coldest, since that's when systems fail under load. Book in the mild months and you're negotiating from a position of choice, not a broken furnace.
How much should you really budget for HVAC in 2026?
Three factors move an HVAC quote more than anything else: how well it's sized, which efficiency tier you pick, and the brand markup. Our editors break down how they weigh each one.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The longevity case
The most expensive variable on the quote isn't the logo — it's whether the system is sized right and installed well. Oversize a premium unit and it short-cycles, wears fast and underperforms; commission a correctly sized mid-tier one and keep up the annual service, and it simply lasts longer. Spend on the installation, not the badge.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
Get the sizing and the commissioning right and the brand debate mostly disappears. Insist on a Manual J, pick an efficiency tier your climate can justify, and pocket every incentive that still applies after the federal credits lapsed.
Evansville vs Hammond
Is furnace replacement cheaper in Evansville or Hammond?
furnace replacement costs about the same in both — roughly $5,650 in each city.
Why does furnace replacement cost more in Hammond than Evansville?
Hammond's higher labor index (0.93 vs 0.93 in Evansville) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is furnace replacement in Evansville, IN?
Expect to pay $4,050 to $7,250 for furnace replacement in Evansville in 2026, averaging around $5,650.
When is the cheapest time to buy furnace replacement — and does it differ by city?
The best window is the same in both Evansville and Hammond: Spring and fall (Mar–May, Sep–Oct), when demand drops and installers discount to keep crews busy — typically 5–15% off peak pricing. The most expensive time anywhere is an emergency replacement during peak summer and mid-winter.
Should I choose where to live based on furnace replacement cost?
Not on this basis — Evansville and Hammond cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik