Furnace Replacement cost: Evansville vs Greenwood (2026)
Budget-wise, furnace replacement in Evansville ($5,650) runs 11% less than in Greenwood ($6,250), a roughly $600 spread.
Evansville IN
Lower costTypically around $5,650
Greenwood IN
Typically around $6,250
Evansville vs Greenwood: full breakdown
| Factor | Evansville | Greenwood |
|---|---|---|
| Typical 2026 cost | $5,650 | $6,250 |
| Estimated range | $4,050–$7,250 | $4,450–$8,050 |
| Labor index (vs US) | ×0.93 | ×1.04 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $200 | $200 |
| Labor share | $3,400 | $3,750 |
| Materials/equipment | $2,250 | $2,500 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
Is the gap worth worrying about?
That's a real $600 difference (11%) on furnace replacement — worth factoring in, though off-season timing and a tighter quote in Greenwood can narrow it.
Furnace replacement by type: Evansville vs Greenwood
Below, each furnace replacement option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Evansville | Greenwood |
|---|---|---|
| Gas furnace | $3,950–$7,150 | $4,350–$7,900 |
| High-efficiency gas furnace | $3,550–$7,150 | $3,900–$7,900 |
| Electric furnace | $2,200–$4,750 | $2,450–$5,250 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
Furnace replacement by home size: Evansville vs Greenwood
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Evansville | Greenwood |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,000–$5,450 | $3,350–$6,000 |
| 1,500 sq ft (≈68,000 BTU) | $3,550–$6,250 | $3,900–$6,900 |
| 2,000 sq ft (≈90,000 BTU) | $4,050–$7,250 | $4,450–$8,050 |
| 2,500 sq ft (≈110,000 BTU) | $4,650–$8,250 | $5,150–$9,150 |
| 3,000 sq ft (≈130,000 BTU) | $5,250–$9,300 | $5,800–$10,300 |
| 3,500+ sq ft (≈150,000 BTU) | $5,850–$10,300 | $6,450–$11,400 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
What hvac pros earn in each metro
About 60% of a furnace replacement bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
No BLS metro wage series for Evansville; we use Indiana regional price parity instead.
Indianapolis-Carmel-Greenwood metro · about 6% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Why spring and fall are cheaper: contractors have open calendar space and compete harder for the work. Why summer and deep winter are expensive: a broken system in extreme weather isn't optional, so you lose your negotiating leverage.
How much should you really budget for HVAC in 2026?
An HVAC budget isn't one number — it's a set of trade-offs between sizing accuracy, efficiency tier and brand. Our editors walk through how each one moves the price.
The efficiency-first case
Where you face brutal summers or hard winters, a higher SEER2/AFUE system or a heat pump runs enough hours to claw back its premium through lower bills — and utility or state rebates can still trim the sticker even though the federal 25C/25D credits closed at the end of 2025. Do the payback arithmetic before you reach for the cheapest box on the lot.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
Skip the brand debate. A correctly sized system, an efficiency tier that fits your climate, and a properly commissioned install will save you more than any label ever could.
Evansville vs Greenwood
Is furnace replacement cheaper in Evansville or Greenwood?
Evansville comes out ahead here, at roughly $5,650 for furnace replacement compared with $6,250 in Greenwood — a 11% ($600) gap as of 2026.
Why does furnace replacement cost more in Greenwood than Evansville?
Greenwood's higher labor index (1.04 vs 0.93 in Evansville) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is furnace replacement in Evansville, IN?
furnace replacement in Evansville runs $4,050–$7,250 as of 2026 — most jobs land near $5,650.
When is the cheapest time to buy furnace replacement — and does it differ by city?
Timing doesn't change by city here — Spring and fall (Mar–May, Sep–Oct) is the cheapest window in both Evansville and Greenwood, saving roughly 5–15%. Avoid peak summer and mid-winter in either location, when emergency replacements push prices up.
Should I choose where to live based on furnace replacement cost?
Not really — the $600 gap is one-time, and smart timing and tighter quotes in Greenwood can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik