Furnace Replacement cost: Enterprise vs Henderson (2026)
Furnace replacement costs about the same in Enterprise and Henderson in 2026 — roughly $5,250 in each.
Enterprise NV
Typically around $5,250
Henderson NV
Typically around $5,250
Enterprise vs Henderson: full breakdown
| Factor | Enterprise | Henderson |
|---|---|---|
| Typical 2026 cost | $5,250 | $5,250 |
| Estimated range | $3,750–$6,700 | $3,750–$6,700 |
| Labor index (vs US) | ×0.98 | ×0.98 |
| Climate zone | Hot | Hot |
| Climate factor | ×0.95 | ×0.95 |
| Local permit | $200 | $200 |
| Labor share | $3,150 | $3,150 |
| Materials/equipment | $2,100 | $2,100 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Basically a tie — focus on the contractor
Neither metro has a cost edge on furnace replacement — spend your decision-making energy on the contractor, not the location.
Furnace replacement by type: Enterprise vs Henderson
Every furnace replacement type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Enterprise | Henderson |
|---|---|---|
| Gas furnace | $3,650–$6,600 | $3,650–$6,600 |
| High-efficiency gas furnace | $3,250–$6,600 | $3,250–$6,600 |
| Electric furnace | $2,050–$4,400 | $2,050–$4,400 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Furnace replacement by home size: Enterprise vs Henderson
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Enterprise | Henderson |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $2,800–$5,050 | $2,800–$5,050 |
| 1,500 sq ft (≈68,000 BTU) | $3,250–$5,800 | $3,250–$5,800 |
| 2,000 sq ft (≈90,000 BTU) | $3,750–$6,700 | $3,750–$6,700 |
| 2,500 sq ft (≈110,000 BTU) | $4,300–$7,650 | $4,300–$7,650 |
| 3,000 sq ft (≈130,000 BTU) | $4,850–$8,550 | $4,850–$8,550 |
| 3,500+ sq ft (≈150,000 BTU) | $5,400–$9,500 | $5,400–$9,500 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What hvac pros earn in each metro
With labor making up about 60% of a furnace replacement job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Las Vegas-Henderson-North Las Vegas metro · about 4% below the US average installer wage.
Las Vegas-Henderson-North Las Vegas metro · about 4% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Crews are busiest — and priciest — exactly when it's hottest or coldest, since that's when systems fail under load. Book in the mild months and you're negotiating from a position of choice, not a broken furnace.
How much should you really budget for HVAC in 2026?
Ask five contractors for an HVAC quote and you'll get five different numbers — usually because they disagree on sizing, efficiency and equipment tier. Here's how our editors think through those trade-offs.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
If there's one takeaway, it's this: sizing and install quality decide whether an HVAC system performs, not the badge on the box. Get the load calculation right, match efficiency to climate, and take the rebates on offer.
Enterprise vs Henderson
Is furnace replacement cheaper in Enterprise or Henderson?
furnace replacement costs about the same in both — roughly $5,250 in each city.
Why does furnace replacement cost more in Henderson than Enterprise?
Henderson's higher labor index (0.98 vs 0.98 in Enterprise) is the biggest factor, with the hot/hot climate split playing a smaller role.
How much is furnace replacement in Enterprise, NV?
furnace replacement in Enterprise runs $3,750–$6,700 as of 2026 — most jobs land near $5,250.
Do hvac pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $30.1/hr in the Las Vegas-Henderson-North Las Vegas area versus $30.1/hr around Las Vegas-Henderson-North Las Vegas (BLS metro wage data). Since labor is roughly 60% of a furnace replacement job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy furnace replacement — and does it differ by city?
It doesn't vary by location — Spring and fall (Mar–May, Sep–Oct) is the discount window in both Enterprise and Henderson (roughly 5–15% off), while peak summer and mid-winter tends to be the most expensive in either city.
Should I choose where to live based on furnace replacement cost?
Not on this basis — Enterprise and Henderson cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik