Furnace Replacement cost: Enid vs Tulsa (2026)
The two metros aren't quite in sync on furnace replacement: Enid sits 2% above Tulsa, or roughly $5,400 versus $5,300 — about $100 apart.
Enid OK
Typically around $5,400
Tulsa OK
Lower costTypically around $5,300
Enid vs Tulsa: full breakdown
| Factor | Enid | Tulsa |
|---|---|---|
| Typical 2026 cost | $5,400 | $5,300 |
| Estimated range | $3,850–$6,900 | $3,800–$6,800 |
| Labor index (vs US) | ×0.96 | ×0.95 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $200 | $200 |
| Labor share | $3,250 | $3,200 |
| Materials/equipment | $2,150 | $2,100 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
How much should this gap actually matter?
A 2% difference on furnace replacement is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Furnace replacement by type: Enid vs Tulsa
Every furnace replacement type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Enid | Tulsa |
|---|---|---|
| Gas furnace | $3,750–$6,800 | $3,700–$6,750 |
| High-efficiency gas furnace | $3,350–$6,800 | $3,300–$6,750 |
| Electric furnace | $2,100–$4,500 | $2,100–$4,450 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
Furnace replacement by home size: Enid vs Tulsa
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Enid | Tulsa |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $2,900–$5,150 | $2,850–$5,100 |
| 1,500 sq ft (≈68,000 BTU) | $3,350–$5,950 | $3,300–$5,900 |
| 2,000 sq ft (≈90,000 BTU) | $3,850–$6,900 | $3,800–$6,800 |
| 2,500 sq ft (≈110,000 BTU) | $4,400–$7,850 | $4,350–$7,750 |
| 3,000 sq ft (≈130,000 BTU) | $5,000–$8,800 | $4,950–$8,700 |
| 3,500+ sq ft (≈150,000 BTU) | $5,550–$9,750 | $5,500–$9,650 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What hvac pros earn in each metro
Roughly 60% of what you pay for furnace replacement is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Oklahoma City metro · about 7% below the US average installer wage.
No BLS metro wage series for Tulsa; we use Oklahoma regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Crews are busiest — and priciest — exactly when it's hottest or coldest, since that's when systems fail under load. Book in the mild months and you're negotiating from a position of choice, not a broken furnace.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The longevity case
Brand is a footnote; sizing and install quality write the story. A right-sized mid-tier system that's properly commissioned and serviced once a year will outlive an oversized premium unit that short-cycles itself to an early grave. Put the money into the crew and the setup rather than the nameplate.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
If there's one takeaway, it's this: sizing and install quality decide whether an HVAC system performs, not the badge on the box. Get the load calculation right, match efficiency to climate, and take the rebates on offer.
Enid vs Tulsa
Is furnace replacement cheaper in Enid or Tulsa?
Tulsa wins on price: furnace replacement runs about $5,300 there versus $5,400 in Enid, a gap of roughly $100 (2%) as of 2026.
Why does furnace replacement cost more in Enid than Tulsa?
Labor rates explain most of it — 0.96 in Enid vs 0.95 in Tulsa. A mixed climate versus mixed accounts for the rest.
How much is furnace replacement in Enid, OK?
Enid homeowners can expect $3,850 to $6,900 for furnace replacement in 2026, with $5,400 the typical number.
When is the cheapest time to buy furnace replacement — and does it differ by city?
It doesn't vary by location — Spring and fall (Mar–May, Sep–Oct) is the discount window in both Enid and Tulsa (roughly 5–15% off), while peak summer and mid-winter tends to be the most expensive in either city.
Should I choose where to live based on furnace replacement cost?
Not really — the $100 gap is one-time, and smart timing and tighter quotes in Enid can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik