Furnace Replacement cost: Eagan vs Minneapolis (2026)
There's essentially no price gap here: furnace replacement runs close to $6,700 in both Eagan and Minneapolis in 2026.
Eagan MN
Typically around $6,700
Minneapolis MN
Typically around $6,700
Eagan vs Minneapolis: full breakdown
| Factor | Eagan | Minneapolis |
|---|---|---|
| Typical 2026 cost | $6,700 | $6,700 |
| Estimated range | $4,750–$8,600 | $4,750–$8,600 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $225 | $225 |
| Labor share | $4,000 | $4,000 |
| Materials/equipment | $2,700 | $2,700 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
No real cost edge either way
With no real price gap on furnace replacement, the choice comes down to contractor quality and timing, not which city you're in.
Furnace replacement by type: Eagan vs Minneapolis
Every furnace replacement type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Eagan | Minneapolis |
|---|---|---|
| Gas furnace | $4,650–$8,450 | $4,650–$8,450 |
| High-efficiency gas furnace | $4,150–$8,450 | $4,150–$8,450 |
| Electric furnace | $2,600–$5,600 | $2,600–$5,600 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
Furnace replacement by home size: Eagan vs Minneapolis
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Eagan | Minneapolis |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,550–$6,450 | $3,550–$6,450 |
| 1,500 sq ft (≈68,000 BTU) | $4,150–$7,400 | $4,150–$7,400 |
| 2,000 sq ft (≈90,000 BTU) | $4,750–$8,600 | $4,750–$8,600 |
| 2,500 sq ft (≈110,000 BTU) | $5,500–$9,800 | $5,500–$9,800 |
| 3,000 sq ft (≈130,000 BTU) | $6,200–$11,000 | $6,200–$11,000 |
| 3,500+ sq ft (≈150,000 BTU) | $6,900–$12,200 | $6,900–$12,200 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
What hvac pros earn in each metro
Roughly 60% of what you pay for furnace replacement is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Installers cut prices in spring and fall because job volume drops and crews sit idle — the opposite happens during a summer heat wave or winter cold snap, when a dead system forces homeowners into a full-price emergency swap.
How much should you really budget for HVAC in 2026?
Three factors move an HVAC quote more than anything else: how well it's sized, which efficiency tier you pick, and the brand markup. Our editors break down how they weigh each one.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The budget-first case
Run a Manual J load calculation, then buy the standard tier — 80% AFUE, 14.3 SEER2 — and stop there. Where summers are short and winters are gentle, the equipment idles most of the year, so premium efficiency never gets enough runtime to earn back its price. Paying for SEER2 you'll rarely tap is the classic way a mild-climate homeowner overspends.
Match the efficiency tier to your climate, insist on a real load calculation, and stack every rebate you qualify for. The expensive mistakes are wrong sizing and a rushed install — not picking the "wrong" brand.
Eagan vs Minneapolis
Is furnace replacement cheaper in Eagan or Minneapolis?
There's no meaningful difference: furnace replacement runs about $6,700 in both places.
Why does furnace replacement cost more in Minneapolis than Eagan?
The main driver is local labor rates: Minneapolis's labor index is 1.11 versus 1.11 in Eagan. Climate zone (cold vs cold) also shift the total.
How much is furnace replacement in Eagan, MN?
Eagan homeowners can expect $4,750 to $8,600 for furnace replacement in 2026, with $6,700 the typical number.
Do hvac pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $36.7/hr in Minneapolis-St. Paul-Bloomington compared with $36.7/hr in Minneapolis-St. Paul-Bloomington (BLS OEWS). Labor is about 60% of a furnace replacement job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy furnace replacement — and does it differ by city?
The best window is the same in both Eagan and Minneapolis: Spring and fall (Mar–May, Sep–Oct), when demand drops and installers discount to keep crews busy — typically 5–15% off peak pricing. The most expensive time anywhere is an emergency replacement during peak summer and mid-winter.
Should I choose where to live based on furnace replacement cost?
No — the cost is essentially identical between Eagan and Minneapolis. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik