Furnace Replacement cost: Dundalk vs Silver Spring (2026)
In 2026, furnace replacement is about 1% more expensive in Dundalk than in Silver Spring. Most homeowners pay around $5,950 in Dundalk versus $5,900 in Silver Spring — a gap of roughly $50.
Dundalk MD
Typically around $5,950
Silver Spring MD
Lower costTypically around $5,900
Dundalk vs Silver Spring: full breakdown
| Factor | Dundalk | Silver Spring |
|---|---|---|
| Typical 2026 cost | $5,950 | $5,900 |
| Estimated range | $4,250–$7,600 | $4,200–$7,550 |
| Labor index (vs US) | ×1.05 | ×1.04 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $225 | $225 |
| Labor share | $3,550 | $3,550 |
| Materials/equipment | $2,400 | $2,350 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
How much should this gap actually matter?
1% is within noise for furnace replacement — contractor selection and timing move the price more than which of these two metros you're in.
Furnace replacement by type: Dundalk vs Silver Spring
We localize each furnace replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Dundalk | Silver Spring |
|---|---|---|
| Gas furnace | $4,100–$7,500 | $4,100–$7,400 |
| High-efficiency gas furnace | $3,700–$7,500 | $3,650–$7,400 |
| Electric furnace | $2,350–$4,950 | $2,300–$4,900 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Furnace replacement by home size: Dundalk vs Silver Spring
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Dundalk | Silver Spring |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,150–$5,700 | $3,150–$5,650 |
| 1,500 sq ft (≈68,000 BTU) | $3,700–$6,550 | $3,650–$6,500 |
| 2,000 sq ft (≈90,000 BTU) | $4,250–$7,600 | $4,200–$7,550 |
| 2,500 sq ft (≈110,000 BTU) | $4,850–$8,650 | $4,800–$8,550 |
| 3,000 sq ft (≈130,000 BTU) | $5,500–$9,700 | $5,450–$9,600 |
| 3,500+ sq ft (≈150,000 BTU) | $6,100–$10,750 | $6,050–$10,650 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
What hvac pros earn in each metro
With labor making up about 60% of a furnace replacement job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Baltimore-Columbia-Towson metro · about 9% above the US average installer wage.
Philadelphia-Camden-Wilmington metro · about 7% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Demand for HVAC work falls off a cliff in the shoulder months, and contractors discount to keep their crews booked. Wait for a 100-degree day or a hard freeze, though, and you're paying emergency rates for a system that just quit.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The brand on the unit matters far less than getting the sizing and installation right. Insist on a Manual J calculation, match efficiency to your climate, and claim every rebate available.
Dundalk vs Silver Spring
Is furnace replacement cheaper in Dundalk or Silver Spring?
Silver Spring comes out ahead here, at roughly $5,900 for furnace replacement compared with $5,950 in Dundalk — a 1% ($50) gap as of 2026.
Why does furnace replacement cost more in Dundalk than Silver Spring?
It comes down to labor: Dundalk indexes at 1.05 against Silver Spring's 1.04. The mixed-vs-mixed climate difference adds to the gap.
How much is furnace replacement in Dundalk, MD?
furnace replacement in Dundalk runs $4,250–$7,600 as of 2026 — most jobs land near $5,950.
Do hvac pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $33.9/hr around Baltimore-Columbia-Towson versus $33.4/hr near Philadelphia-Camden-Wilmington. With labor making up about 60% of a furnace replacement job, that difference carries straight through to the final price.
When is the cheapest time to buy furnace replacement — and does it differ by city?
The best window is the same in both Dundalk and Silver Spring: Spring and fall (Mar–May, Sep–Oct), when demand drops and installers discount to keep crews busy — typically 5–15% off peak pricing. The most expensive time anywhere is an emergency replacement during peak summer and mid-winter.
Should I choose where to live based on furnace replacement cost?
Not really — the $50 gap is one-time, and smart timing and tighter quotes in Dundalk can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik