Furnace Replacement cost: Clovis vs Roswell (2026)
There's essentially no price gap here: furnace replacement runs close to $5,150 in both Clovis and Roswell in 2026.
Clovis NM
Typically around $5,150
Roswell NM
Typically around $5,150
Clovis vs Roswell: full breakdown
| Factor | Clovis | Roswell |
|---|---|---|
| Typical 2026 cost | $5,150 | $5,150 |
| Estimated range | $3,700–$6,600 | $3,700–$6,600 |
| Labor index (vs US) | ×0.92 | ×0.92 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $200 | $200 |
| Labor share | $3,100 | $3,100 |
| Materials/equipment | $2,050 | $2,050 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
A wash — choose on quality, not city
Neither metro has a cost edge on furnace replacement — spend your decision-making energy on the contractor, not the location.
Furnace replacement by type: Clovis vs Roswell
Below, each furnace replacement option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Clovis | Roswell |
|---|---|---|
| Gas furnace | $3,600–$6,500 | $3,600–$6,500 |
| High-efficiency gas furnace | $3,200–$6,500 | $3,200–$6,500 |
| Electric furnace | $2,050–$4,300 | $2,050–$4,300 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
Furnace replacement by home size: Clovis vs Roswell
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Clovis | Roswell |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $2,750–$4,950 | $2,750–$4,950 |
| 1,500 sq ft (≈68,000 BTU) | $3,200–$5,700 | $3,200–$5,700 |
| 2,000 sq ft (≈90,000 BTU) | $3,700–$6,600 | $3,700–$6,600 |
| 2,500 sq ft (≈110,000 BTU) | $4,250–$7,550 | $4,250–$7,550 |
| 3,000 sq ft (≈130,000 BTU) | $4,800–$8,450 | $4,800–$8,450 |
| 3,500+ sq ft (≈150,000 BTU) | $5,350–$9,350 | $5,350–$9,350 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Cheapest time for furnace replacement in either city
Demand for HVAC work falls off a cliff in the shoulder months, and contractors discount to keep their crews booked. Wait for a 100-degree day or a hard freeze, though, and you're paying emergency rates for a system that just quit.
How much should you really budget for HVAC in 2026?
Ask five contractors for an HVAC quote and you'll get five different numbers — usually because they disagree on sizing, efficiency and equipment tier. Here's how our editors think through those trade-offs.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
Match the efficiency tier to your climate, insist on a real load calculation, and stack every rebate you qualify for. The expensive mistakes are wrong sizing and a rushed install — not picking the "wrong" brand.
Clovis vs Roswell
Is furnace replacement cheaper in Clovis or Roswell?
Practically identical — expect around $5,150 for furnace replacement whichever city you're in.
Why does furnace replacement cost more in Roswell than Clovis?
Roswell's higher labor index (0.92 vs 0.92 in Clovis) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is furnace replacement in Clovis, NM?
Expect to pay $3,700 to $6,600 for furnace replacement in Clovis in 2026, averaging around $5,150.
When is the cheapest time to buy furnace replacement — and does it differ by city?
It doesn't vary by location — Spring and fall (Mar–May, Sep–Oct) is the discount window in both Clovis and Roswell (roughly 5–15% off), while peak summer and mid-winter tends to be the most expensive in either city.
Should I choose where to live based on furnace replacement cost?
There's no cost argument here between Clovis and Roswell — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik