Furnace Replacement cost: Burnsville vs St. Paul (2026)
Burnsville and St. Paul are a near-perfect match on furnace replacement cost in 2026, both landing around $6,700.
Burnsville MN
Typically around $6,700
St. Paul MN
Typically around $6,700
Burnsville vs St. Paul: full breakdown
| Factor | Burnsville | St. Paul |
|---|---|---|
| Typical 2026 cost | $6,700 | $6,700 |
| Estimated range | $4,750–$8,600 | $4,750–$8,600 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $225 | $225 |
| Labor share | $4,000 | $4,000 |
| Materials/equipment | $2,700 | $2,700 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
No real cost edge either way
The two metros are effectively a wash for furnace replacement — pick on contractor quality and timing, not location.
Furnace replacement by type: Burnsville vs St. Paul
Every furnace replacement type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Burnsville | St. Paul |
|---|---|---|
| Gas furnace | $4,650–$8,450 | $4,650–$8,450 |
| High-efficiency gas furnace | $4,150–$8,450 | $4,150–$8,450 |
| Electric furnace | $2,600–$5,600 | $2,600–$5,600 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
Furnace replacement by home size: Burnsville vs St. Paul
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Burnsville | St. Paul |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,550–$6,450 | $3,550–$6,450 |
| 1,500 sq ft (≈68,000 BTU) | $4,150–$7,400 | $4,150–$7,400 |
| 2,000 sq ft (≈90,000 BTU) | $4,750–$8,600 | $4,750–$8,600 |
| 2,500 sq ft (≈110,000 BTU) | $5,500–$9,800 | $5,500–$9,800 |
| 3,000 sq ft (≈130,000 BTU) | $6,200–$11,000 | $6,200–$11,000 |
| 3,500+ sq ft (≈150,000 BTU) | $6,900–$12,200 | $6,900–$12,200 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
What hvac pros earn in each metro
Since labor accounts for around 60% of what a furnace replacement job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
A furnace or AC that dies mid-heat-wave gets replaced at whatever the on-call crew charges. One that gets swapped in April or October gets a competitive, unhurried quote instead.
How much should you really budget for HVAC in 2026?
Get the sizing wrong or the efficiency tier mismatched to your climate, and the price drifts fast in either direction. Below, a look at how those choices — plus brand markup — shape the real number.
The longevity case
The most expensive variable on the quote isn't the logo — it's whether the system is sized right and installed well. Oversize a premium unit and it short-cycles, wears fast and underperforms; commission a correctly sized mid-tier one and keep up the annual service, and it simply lasts longer. Spend on the installation, not the badge.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The brand on the unit matters far less than getting the sizing and installation right. Insist on a Manual J calculation, match efficiency to your climate, and claim every rebate available.
Burnsville vs St. Paul
Is furnace replacement cheaper in Burnsville or St. Paul?
Practically identical — expect around $6,700 for furnace replacement whichever city you're in.
Why does furnace replacement cost more in St. Paul than Burnsville?
St. Paul's higher labor index (1.11 vs 1.11 in Burnsville) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is furnace replacement in Burnsville, MN?
Expect to pay $4,750 to $8,600 for furnace replacement in Burnsville in 2026, averaging around $6,700.
Do hvac pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $36.7/hr in the Minneapolis-St. Paul-Bloomington area and $36.7/hr in Minneapolis-St. Paul-Bloomington. Given labor is around 60% of a furnace replacement job's cost, that gap explains most of the price spread.
When is the cheapest time to buy furnace replacement — and does it differ by city?
It doesn't vary by location — Spring and fall (Mar–May, Sep–Oct) is the discount window in both Burnsville and St. Paul (roughly 5–15% off), while peak summer and mid-winter tends to be the most expensive in either city.
Should I choose where to live based on furnace replacement cost?
Cost shouldn't be the deciding factor between Burnsville and St. Paul — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik