Furnace Replacement cost: Brookhaven vs Savannah (2026)
The two metros aren't quite in sync on furnace replacement: Brookhaven sits 1% below Savannah, or roughly $5,150 versus $5,200 — about $50 apart.
Brookhaven GA
Lower costTypically around $5,150
Savannah GA
Typically around $5,200
Brookhaven vs Savannah: full breakdown
| Factor | Brookhaven | Savannah |
|---|---|---|
| Typical 2026 cost | $5,150 | $5,200 |
| Estimated range | $3,700–$6,600 | $3,700–$6,700 |
| Labor index (vs US) | ×0.96 | ×0.98 |
| Climate zone | Hot | Hot |
| Climate factor | ×0.95 | ×0.95 |
| Local permit | $225 | $200 |
| Labor share | $3,100 | $3,100 |
| Materials/equipment | $2,050 | $2,100 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
How much should this gap actually matter?
A 1% difference on furnace replacement is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Furnace replacement by type: Brookhaven vs Savannah
Each furnace replacement option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Brookhaven | Savannah |
|---|---|---|
| Gas furnace | $3,600–$6,500 | $3,650–$6,600 |
| High-efficiency gas furnace | $3,250–$6,500 | $3,250–$6,600 |
| Electric furnace | $2,050–$4,350 | $2,050–$4,350 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Furnace replacement by home size: Brookhaven vs Savannah
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Brookhaven | Savannah |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $2,800–$4,950 | $2,800–$5,000 |
| 1,500 sq ft (≈68,000 BTU) | $3,250–$5,700 | $3,250–$5,750 |
| 2,000 sq ft (≈90,000 BTU) | $3,700–$6,600 | $3,700–$6,700 |
| 2,500 sq ft (≈110,000 BTU) | $4,250–$7,500 | $4,300–$7,600 |
| 3,000 sq ft (≈130,000 BTU) | $4,800–$8,450 | $4,850–$8,550 |
| 3,500+ sq ft (≈150,000 BTU) | $5,350–$9,350 | $5,400–$9,450 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
What hvac pros earn in each metro
Labor is about 60% of a furnace replacement bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Atlanta-Sandy Springs-Roswell metro · about 7% below the US average installer wage.
No BLS metro wage series for Savannah; we use Georgia regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Demand for HVAC work falls off a cliff in the shoulder months, and contractors discount to keep their crews booked. Wait for a 100-degree day or a hard freeze, though, and you're paying emergency rates for a system that just quit.
How much should you really budget for HVAC in 2026?
An HVAC budget isn't one number — it's a set of trade-offs between sizing accuracy, efficiency tier and brand. Our editors walk through how each one moves the price.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The longevity case
Brand is a footnote; sizing and install quality write the story. A right-sized mid-tier system that's properly commissioned and serviced once a year will outlive an oversized premium unit that short-cycles itself to an early grave. Put the money into the crew and the setup rather than the nameplate.
Climate decides the efficiency tier; a proper load calculation decides everything else. Nail both, stack the rebates you can, and you've sidestepped the two mistakes — wrong size, rushed install — that actually inflate the lifetime cost.
Brookhaven vs Savannah
Is furnace replacement cheaper in Brookhaven or Savannah?
Brookhaven wins on price: furnace replacement runs about $5,150 there versus $5,200 in Savannah, a gap of roughly $50 (1%) as of 2026.
Why does furnace replacement cost more in Savannah than Brookhaven?
Labor rates explain most of it — 0.98 in Savannah vs 0.96 in Brookhaven. A hot climate versus hot, along with differing permit costs, accounts for the rest.
How much is furnace replacement in Brookhaven, GA?
furnace replacement in Brookhaven runs $3,700–$6,600 as of 2026 — most jobs land near $5,150.
When is the cheapest time to buy furnace replacement — and does it differ by city?
No, the seasonal pattern is the same in Brookhaven and Savannah: book during Spring and fall (Mar–May, Sep–Oct) for about 5–15% in savings. Peak summer and mid-winter is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on furnace replacement cost?
Rarely. The $50 difference is real but one-time, and you can often close most of it in Savannah by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik