Furnace Replacement cost: Bothell vs Tacoma (2026)
Furnace replacement costs about the same in Bothell and Tacoma in 2026 — roughly $6,700 in each.
Bothell WA
Typically around $6,700
Tacoma WA
Typically around $6,700
Bothell vs Tacoma: full breakdown
| Factor | Bothell | Tacoma |
|---|---|---|
| Typical 2026 cost | $6,700 | $6,700 |
| Estimated range | $4,800–$8,600 | $4,800–$8,600 |
| Labor index (vs US) | ×1.19 | ×1.19 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $4,000 | $4,000 |
| Materials/equipment | $2,700 | $2,700 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
No real cost edge either way
Neither metro has a cost edge on furnace replacement — spend your decision-making energy on the contractor, not the location.
Furnace replacement by type: Bothell vs Tacoma
Below, each furnace replacement option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Bothell | Tacoma |
|---|---|---|
| Gas furnace | $4,650–$8,450 | $4,650–$8,450 |
| High-efficiency gas furnace | $4,200–$8,450 | $4,200–$8,450 |
| Electric furnace | $2,650–$5,600 | $2,650–$5,600 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
Furnace replacement by home size: Bothell vs Tacoma
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Bothell | Tacoma |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,600–$6,450 | $3,600–$6,450 |
| 1,500 sq ft (≈68,000 BTU) | $4,200–$7,400 | $4,200–$7,400 |
| 2,000 sq ft (≈90,000 BTU) | $4,800–$8,600 | $4,800–$8,600 |
| 2,500 sq ft (≈110,000 BTU) | $5,500–$9,800 | $5,500–$9,800 |
| 3,000 sq ft (≈130,000 BTU) | $6,200–$10,950 | $6,200–$10,950 |
| 3,500+ sq ft (≈150,000 BTU) | $6,900–$12,150 | $6,900–$12,150 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What hvac pros earn in each metro
About 60% of a furnace replacement bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Installers cut prices in spring and fall because job volume drops and crews sit idle — the opposite happens during a summer heat wave or winter cold snap, when a dead system forces homeowners into a full-price emergency swap.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The brand on the unit matters far less than getting the sizing and installation right. Insist on a Manual J calculation, match efficiency to your climate, and claim every rebate available.
Bothell vs Tacoma
Is furnace replacement cheaper in Bothell or Tacoma?
There's no meaningful difference: furnace replacement runs about $6,700 in both places.
Why does furnace replacement cost more in Tacoma than Bothell?
Labor rates explain most of it — 1.19 in Tacoma vs 1.19 in Bothell. A mixed climate versus mixed accounts for the rest.
How much is furnace replacement in Bothell, WA?
Expect to pay $4,800 to $8,600 for furnace replacement in Bothell in 2026, averaging around $6,700.
Do hvac pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $41.1/hr in the Seattle-Tacoma-Bellevue area versus $41.1/hr around Seattle-Tacoma-Bellevue (BLS metro wage data). Since labor is roughly 60% of a furnace replacement job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy furnace replacement — and does it differ by city?
It doesn't vary by location — Spring and fall (Mar–May, Sep–Oct) is the discount window in both Bothell and Tacoma (roughly 5–15% off), while peak summer and mid-winter tends to be the most expensive in either city.
Should I choose where to live based on furnace replacement cost?
No — the cost is essentially identical between Bothell and Tacoma. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik