Furnace Replacement cost: Boston vs Haverhill (2026)
In 2026, Boston and Haverhill land on nearly identical furnace replacement pricing — about $6,900 either way.
Boston MA
Typically around $6,900
Haverhill MA
Typically around $6,900
Boston vs Haverhill: full breakdown
| Factor | Boston | Haverhill |
|---|---|---|
| Typical 2026 cost | $6,900 | $6,900 |
| Estimated range | $4,950–$8,850 | $4,950–$8,850 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $250 | $250 |
| Labor share | $4,150 | $4,150 |
| Materials/equipment | $2,750 | $2,750 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
No real cost edge either way
With no real price gap on furnace replacement, the choice comes down to contractor quality and timing, not which city you're in.
Furnace replacement by type: Boston vs Haverhill
Each furnace replacement option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Boston | Haverhill |
|---|---|---|
| Gas furnace | $4,800–$8,750 | $4,800–$8,750 |
| High-efficiency gas furnace | $4,300–$8,750 | $4,300–$8,750 |
| Electric furnace | $2,700–$5,800 | $2,700–$5,800 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Furnace replacement by home size: Boston vs Haverhill
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Boston | Haverhill |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,700–$6,650 | $3,700–$6,650 |
| 1,500 sq ft (≈68,000 BTU) | $4,300–$7,650 | $4,300–$7,650 |
| 2,000 sq ft (≈90,000 BTU) | $4,950–$8,850 | $4,950–$8,850 |
| 2,500 sq ft (≈110,000 BTU) | $5,650–$10,100 | $5,650–$10,100 |
| 3,000 sq ft (≈130,000 BTU) | $6,400–$11,350 | $6,400–$11,350 |
| 3,500+ sq ft (≈150,000 BTU) | $7,150–$12,550 | $7,150–$12,550 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
What hvac pros earn in each metro
Since labor accounts for around 60% of what a furnace replacement job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Demand for HVAC work falls off a cliff in the shoulder months, and contractors discount to keep their crews booked. Wait for a 100-degree day or a hard freeze, though, and you're paying emergency rates for a system that just quit.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The longevity case
Brand is a footnote; sizing and install quality write the story. A right-sized mid-tier system that's properly commissioned and serviced once a year will outlive an oversized premium unit that short-cycles itself to an early grave. Put the money into the crew and the setup rather than the nameplate.
The efficiency-first case
Where you face brutal summers or hard winters, a higher SEER2/AFUE system or a heat pump runs enough hours to claw back its premium through lower bills — and utility or state rebates can still trim the sticker even though the federal 25C/25D credits closed at the end of 2025. Do the payback arithmetic before you reach for the cheapest box on the lot.
The budget-first case
In a temperate region the smart move is to size the job correctly with a Manual J and take the base efficiency tier. A system that spends most days coasting can't recover the cost of a high-SEER2 compressor, because the savings only show up under heavy load you don't put on it. Match the equipment to how little you actually run it, not to the brochure's top number.
Climate decides the efficiency tier; a proper load calculation decides everything else. Nail both, stack the rebates you can, and you've sidestepped the two mistakes — wrong size, rushed install — that actually inflate the lifetime cost.
Boston vs Haverhill
Is furnace replacement cheaper in Boston or Haverhill?
Not really — both cities land at almost the same number for furnace replacement, around $6,900 each.
Why does furnace replacement cost more in Haverhill than Boston?
The main driver is local labor rates: Haverhill's labor index is 1.14 versus 1.14 in Boston. Climate zone (cold vs cold) also shift the total.
How much is furnace replacement in Boston, MA?
In Boston, furnace replacement typically runs $4,950–$8,850 in 2026, with most homeowners paying around $6,900.
Do hvac pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $38.4/hr in the Boston-Cambridge-Newton area versus $38.4/hr around Boston-Cambridge-Newton (BLS metro wage data). Since labor is roughly 60% of a furnace replacement job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy furnace replacement — and does it differ by city?
It doesn't vary by location — Spring and fall (Mar–May, Sep–Oct) is the discount window in both Boston and Haverhill (roughly 5–15% off), while peak summer and mid-winter tends to be the most expensive in either city.
Should I choose where to live based on furnace replacement cost?
No — the cost is essentially identical between Boston and Haverhill. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik