Furnace Replacement cost: Bloomington vs Eden Prairie (2026)
In 2026, Bloomington and Eden Prairie land on nearly identical furnace replacement pricing — about $6,700 either way.
Bloomington MN
Typically around $6,700
Eden Prairie MN
Typically around $6,700
Bloomington vs Eden Prairie: full breakdown
| Factor | Bloomington | Eden Prairie |
|---|---|---|
| Typical 2026 cost | $6,700 | $6,700 |
| Estimated range | $4,750–$8,600 | $4,750–$8,600 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $225 | $225 |
| Labor share | $4,000 | $4,000 |
| Materials/equipment | $2,700 | $2,700 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
No real cost edge either way
The two metros are effectively a wash for furnace replacement — pick on contractor quality and timing, not location.
Furnace replacement by type: Bloomington vs Eden Prairie
Below, each furnace replacement option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Bloomington | Eden Prairie |
|---|---|---|
| Gas furnace | $4,650–$8,450 | $4,650–$8,450 |
| High-efficiency gas furnace | $4,150–$8,450 | $4,150–$8,450 |
| Electric furnace | $2,600–$5,600 | $2,600–$5,600 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Furnace replacement by home size: Bloomington vs Eden Prairie
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Bloomington | Eden Prairie |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,550–$6,450 | $3,550–$6,450 |
| 1,500 sq ft (≈68,000 BTU) | $4,150–$7,400 | $4,150–$7,400 |
| 2,000 sq ft (≈90,000 BTU) | $4,750–$8,600 | $4,750–$8,600 |
| 2,500 sq ft (≈110,000 BTU) | $5,500–$9,800 | $5,500–$9,800 |
| 3,000 sq ft (≈130,000 BTU) | $6,200–$11,000 | $6,200–$11,000 |
| 3,500+ sq ft (≈150,000 BTU) | $6,900–$12,200 | $6,900–$12,200 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What hvac pros earn in each metro
Roughly 60% of what you pay for furnace replacement is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Why spring and fall are cheaper: contractors have open calendar space and compete harder for the work. Why summer and deep winter are expensive: a broken system in extreme weather isn't optional, so you lose your negotiating leverage.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The budget-first case
Run a Manual J load calculation, then buy the standard tier — 80% AFUE, 14.3 SEER2 — and stop there. Where summers are short and winters are gentle, the equipment idles most of the year, so premium efficiency never gets enough runtime to earn back its price. Paying for SEER2 you'll rarely tap is the classic way a mild-climate homeowner overspends.
The efficiency-first case
Where you face brutal summers or hard winters, a higher SEER2/AFUE system or a heat pump runs enough hours to claw back its premium through lower bills — and utility or state rebates can still trim the sticker even though the federal 25C/25D credits closed at the end of 2025. Do the payback arithmetic before you reach for the cheapest box on the lot.
If there's one takeaway, it's this: sizing and install quality decide whether an HVAC system performs, not the badge on the box. Get the load calculation right, match efficiency to climate, and take the rebates on offer.
Bloomington vs Eden Prairie
Is furnace replacement cheaper in Bloomington or Eden Prairie?
Not really — both cities land at almost the same number for furnace replacement, around $6,700 each.
Why does furnace replacement cost more in Eden Prairie than Bloomington?
The main driver is local labor rates: Eden Prairie's labor index is 1.11 versus 1.11 in Bloomington. Climate zone (cold vs cold) also shift the total.
How much is furnace replacement in Bloomington, MN?
Bloomington homeowners can expect $4,750 to $8,600 for furnace replacement in 2026, with $6,700 the typical number.
Do hvac pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $36.7/hr in the Minneapolis-St. Paul-Bloomington area and $36.7/hr in Minneapolis-St. Paul-Bloomington. Given labor is around 60% of a furnace replacement job's cost, that gap explains most of the price spread.
When is the cheapest time to buy furnace replacement — and does it differ by city?
It doesn't vary by location — Spring and fall (Mar–May, Sep–Oct) is the discount window in both Bloomington and Eden Prairie (roughly 5–15% off), while peak summer and mid-winter tends to be the most expensive in either city.
Should I choose where to live based on furnace replacement cost?
There's no cost argument here between Bloomington and Eden Prairie — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik