Furnace Replacement cost: Bentonville vs Fayetteville (2026)
Bentonville and Fayetteville are a near-perfect match on furnace replacement cost in 2026, both landing around $5,300.
Bentonville AR
Typically around $5,300
Fayetteville AR
Typically around $5,300
Bentonville vs Fayetteville: full breakdown
| Factor | Bentonville | Fayetteville |
|---|---|---|
| Typical 2026 cost | $5,300 | $5,300 |
| Estimated range | $3,800–$6,800 | $3,800–$6,800 |
| Labor index (vs US) | ×0.95 | ×0.95 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $200 | $200 |
| Labor share | $3,200 | $3,200 |
| Materials/equipment | $2,100 | $2,100 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
Basically a tie — focus on the contractor
With no real price gap on furnace replacement, the choice comes down to contractor quality and timing, not which city you're in.
Furnace replacement by type: Bentonville vs Fayetteville
Below, each furnace replacement option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Bentonville | Fayetteville |
|---|---|---|
| Gas furnace | $3,700–$6,750 | $3,700–$6,750 |
| High-efficiency gas furnace | $3,300–$6,750 | $3,300–$6,750 |
| Electric furnace | $2,100–$4,450 | $2,100–$4,450 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Furnace replacement by home size: Bentonville vs Fayetteville
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Bentonville | Fayetteville |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $2,850–$5,100 | $2,850–$5,100 |
| 1,500 sq ft (≈68,000 BTU) | $3,300–$5,900 | $3,300–$5,900 |
| 2,000 sq ft (≈90,000 BTU) | $3,800–$6,800 | $3,800–$6,800 |
| 2,500 sq ft (≈110,000 BTU) | $4,350–$7,750 | $4,350–$7,750 |
| 3,000 sq ft (≈130,000 BTU) | $4,950–$8,700 | $4,950–$8,700 |
| 3,500+ sq ft (≈150,000 BTU) | $5,500–$9,650 | $5,500–$9,650 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Cheapest time for furnace replacement in either city
Installers cut prices in spring and fall because job volume drops and crews sit idle — the opposite happens during a summer heat wave or winter cold snap, when a dead system forces homeowners into a full-price emergency swap.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The longevity case
The most expensive variable on the quote isn't the logo — it's whether the system is sized right and installed well. Oversize a premium unit and it short-cycles, wears fast and underperforms; commission a correctly sized mid-tier one and keep up the annual service, and it simply lasts longer. Spend on the installation, not the badge.
The efficiency-first case
Where you face brutal summers or hard winters, a higher SEER2/AFUE system or a heat pump runs enough hours to claw back its premium through lower bills — and utility or state rebates can still trim the sticker even though the federal 25C/25D credits closed at the end of 2025. Do the payback arithmetic before you reach for the cheapest box on the lot.
The budget-first case
In a temperate region the smart move is to size the job correctly with a Manual J and take the base efficiency tier. A system that spends most days coasting can't recover the cost of a high-SEER2 compressor, because the savings only show up under heavy load you don't put on it. Match the equipment to how little you actually run it, not to the brochure's top number.
Match the efficiency tier to your climate, insist on a real load calculation, and stack every rebate you qualify for. The expensive mistakes are wrong sizing and a rushed install — not picking the "wrong" brand.
Bentonville vs Fayetteville
Is furnace replacement cheaper in Bentonville or Fayetteville?
Practically identical — expect around $5,300 for furnace replacement whichever city you're in.
Why does furnace replacement cost more in Fayetteville than Bentonville?
It comes down to labor: Fayetteville indexes at 0.95 against Bentonville's 0.95. The mixed-vs-mixed climate difference adds to the gap.
How much is furnace replacement in Bentonville, AR?
Expect to pay $3,800 to $6,800 for furnace replacement in Bentonville in 2026, averaging around $5,300.
When is the cheapest time to buy furnace replacement — and does it differ by city?
Timing doesn't change by city here — Spring and fall (Mar–May, Sep–Oct) is the cheapest window in both Bentonville and Fayetteville, saving roughly 5–15%. Avoid peak summer and mid-winter in either location, when emergency replacements push prices up.
Should I choose where to live based on furnace replacement cost?
There's no cost argument here between Bentonville and Fayetteville — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik