Furnace Replacement cost: Beloit vs Kenosha (2026)
Beloit runs 7% lower than Kenosha for furnace replacement — expect around $5,750 in Beloit against $6,150 in Kenosha, a difference of about $400.
Beloit WI
Lower costTypically around $5,750
Kenosha WI
Typically around $6,150
Beloit vs Kenosha: full breakdown
| Factor | Beloit | Kenosha |
|---|---|---|
| Typical 2026 cost | $5,750 | $6,150 |
| Estimated range | $4,100–$7,400 | $4,400–$7,900 |
| Labor index (vs US) | ×0.95 | ×1.01 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $200 | $225 |
| Labor share | $3,450 | $3,700 |
| Materials/equipment | $2,300 | $2,450 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
How much should this gap actually matter?
That 7% gap is small — for furnace replacement it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Furnace replacement by type: Beloit vs Kenosha
We localize each furnace replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Beloit | Kenosha |
|---|---|---|
| Gas furnace | $4,000–$7,300 | $4,250–$7,750 |
| High-efficiency gas furnace | $3,600–$7,300 | $3,850–$7,750 |
| Electric furnace | $2,250–$4,850 | $2,400–$5,150 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
Furnace replacement by home size: Beloit vs Kenosha
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Beloit | Kenosha |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,100–$5,550 | $3,300–$5,900 |
| 1,500 sq ft (≈68,000 BTU) | $3,600–$6,350 | $3,850–$6,800 |
| 2,000 sq ft (≈90,000 BTU) | $4,100–$7,400 | $4,400–$7,900 |
| 2,500 sq ft (≈110,000 BTU) | $4,700–$8,450 | $5,050–$8,950 |
| 3,000 sq ft (≈130,000 BTU) | $5,350–$9,450 | $5,700–$10,050 |
| 3,500+ sq ft (≈150,000 BTU) | $5,950–$10,500 | $6,350–$11,150 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Cheapest time for furnace replacement in either city
Demand for HVAC work falls off a cliff in the shoulder months, and contractors discount to keep their crews booked. Wait for a 100-degree day or a hard freeze, though, and you're paying emergency rates for a system that just quit.
How much should you really budget for HVAC in 2026?
An HVAC budget isn't one number — it's a set of trade-offs between sizing accuracy, efficiency tier and brand. Our editors walk through how each one moves the price.
The budget-first case
In a temperate region the smart move is to size the job correctly with a Manual J and take the base efficiency tier. A system that spends most days coasting can't recover the cost of a high-SEER2 compressor, because the savings only show up under heavy load you don't put on it. Match the equipment to how little you actually run it, not to the brochure's top number.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
Match the efficiency tier to your climate, insist on a real load calculation, and stack every rebate you qualify for. The expensive mistakes are wrong sizing and a rushed install — not picking the "wrong" brand.
Beloit vs Kenosha
Is furnace replacement cheaper in Beloit or Kenosha?
Beloit comes out ahead here, at roughly $5,750 for furnace replacement compared with $6,150 in Kenosha — a 7% ($400) gap as of 2026.
Why does furnace replacement cost more in Kenosha than Beloit?
The main driver is local labor rates: Kenosha's labor index is 1.01 versus 0.95 in Beloit. Climate zone (cold vs cold) and permit fees also shift the total.
How much is furnace replacement in Beloit, WI?
Expect to pay $4,100 to $7,400 for furnace replacement in Beloit in 2026, averaging around $5,750.
When is the cheapest time to buy furnace replacement — and does it differ by city?
The best window is the same in both Beloit and Kenosha: Spring and fall (Mar–May, Sep–Oct), when demand drops and installers discount to keep crews busy — typically 5–15% off peak pricing. The most expensive time anywhere is an emergency replacement during peak summer and mid-winter.
Should I choose where to live based on furnace replacement cost?
Rarely. The $400 difference is real but one-time, and you can often close most of it in Kenosha by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik