Furnace Replacement cost: Bellevue vs Bremerton (2026)
Bellevue runs 13% higher than Bremerton for furnace replacement — expect around $6,700 in Bellevue against $5,950 in Bremerton, a difference of about $750.
Bellevue WA
Typically around $6,700
Bremerton WA
Lower costTypically around $5,950
Bellevue vs Bremerton: full breakdown
| Factor | Bellevue | Bremerton |
|---|---|---|
| Typical 2026 cost | $6,700 | $5,950 |
| Estimated range | $4,800–$8,600 | $4,250–$7,650 |
| Labor index (vs US) | ×1.19 | ×1.05 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $4,000 | $3,550 |
| Materials/equipment | $2,700 | $2,400 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Is the gap worth worrying about?
That's a real $750 difference (13%) on furnace replacement — worth factoring in, though off-season timing and a tighter quote in Bellevue can narrow it.
Furnace replacement by type: Bellevue vs Bremerton
We localize each furnace replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Bellevue | Bremerton |
|---|---|---|
| Gas furnace | $4,650–$8,450 | $4,150–$7,500 |
| High-efficiency gas furnace | $4,200–$8,450 | $3,750–$7,500 |
| Electric furnace | $2,650–$5,600 | $2,350–$5,000 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Furnace replacement by home size: Bellevue vs Bremerton
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Bellevue | Bremerton |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,600–$6,450 | $3,200–$5,750 |
| 1,500 sq ft (≈68,000 BTU) | $4,200–$7,400 | $3,750–$6,550 |
| 2,000 sq ft (≈90,000 BTU) | $4,800–$8,600 | $4,250–$7,650 |
| 2,500 sq ft (≈110,000 BTU) | $5,500–$9,800 | $4,900–$8,700 |
| 3,000 sq ft (≈130,000 BTU) | $6,200–$10,950 | $5,500–$9,750 |
| 3,500+ sq ft (≈150,000 BTU) | $6,900–$12,150 | $6,150–$10,800 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
What hvac pros earn in each metro
About 60% of a furnace replacement bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
No BLS metro wage series for Bremerton; we use Washington regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Crews are busiest — and priciest — exactly when it's hottest or coldest, since that's when systems fail under load. Book in the mild months and you're negotiating from a position of choice, not a broken furnace.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The budget-first case
In a temperate region the smart move is to size the job correctly with a Manual J and take the base efficiency tier. A system that spends most days coasting can't recover the cost of a high-SEER2 compressor, because the savings only show up under heavy load you don't put on it. Match the equipment to how little you actually run it, not to the brochure's top number.
The longevity case
The most expensive variable on the quote isn't the logo — it's whether the system is sized right and installed well. Oversize a premium unit and it short-cycles, wears fast and underperforms; commission a correctly sized mid-tier one and keep up the annual service, and it simply lasts longer. Spend on the installation, not the badge.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The brand on the unit matters far less than getting the sizing and installation right. Insist on a Manual J calculation, match efficiency to your climate, and claim every rebate available.
Bellevue vs Bremerton
Is furnace replacement cheaper in Bellevue or Bremerton?
Bremerton wins on price: furnace replacement runs about $5,950 there versus $6,700 in Bellevue, a gap of roughly $750 (13%) as of 2026.
Why does furnace replacement cost more in Bellevue than Bremerton?
It comes down to labor: Bellevue indexes at 1.19 against Bremerton's 1.05. The mixed-vs-mixed climate difference adds to the gap.
How much is furnace replacement in Bellevue, WA?
Bellevue homeowners can expect $4,800 to $8,600 for furnace replacement in 2026, with $6,700 the typical number.
When is the cheapest time to buy furnace replacement — and does it differ by city?
Timing doesn't change by city here — Spring and fall (Mar–May, Sep–Oct) is the cheapest window in both Bellevue and Bremerton, saving roughly 5–15%. Avoid peak summer and mid-winter in either location, when emergency replacements push prices up.
Should I choose where to live based on furnace replacement cost?
That would be a stretch. $750 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Bellevue can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik