Furnace Replacement cost: Arlington vs Newport News (2026)
Arlington runs 15% higher than Newport News for furnace replacement — expect around $6,100 in Arlington against $5,300 in Newport News, a difference of about $800.
Arlington VA
Typically around $6,100
Newport News VA
Lower costTypically around $5,300
Arlington vs Newport News: full breakdown
| Factor | Arlington | Newport News |
|---|---|---|
| Typical 2026 cost | $6,100 | $5,300 |
| Estimated range | $4,350–$7,850 | $3,800–$6,800 |
| Labor index (vs US) | ×1.08 | ×0.94 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $225 |
| Labor share | $3,650 | $3,200 |
| Materials/equipment | $2,450 | $2,100 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Is the price difference a dealbreaker?
15% (about $800) is enough to notice on a furnace replacement budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Arlington can close much of that gap.
Furnace replacement by type: Arlington vs Newport News
Each furnace replacement option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Arlington | Newport News |
|---|---|---|
| Gas furnace | $4,250–$7,700 | $3,700–$6,700 |
| High-efficiency gas furnace | $3,800–$7,700 | $3,350–$6,700 |
| Electric furnace | $2,400–$5,100 | $2,100–$4,450 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
Furnace replacement by home size: Arlington vs Newport News
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Arlington | Newport News |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,300–$5,900 | $2,850–$5,100 |
| 1,500 sq ft (≈68,000 BTU) | $3,800–$6,750 | $3,350–$5,850 |
| 2,000 sq ft (≈90,000 BTU) | $4,350–$7,850 | $3,800–$6,800 |
| 2,500 sq ft (≈110,000 BTU) | $5,000–$8,900 | $4,350–$7,750 |
| 3,000 sq ft (≈130,000 BTU) | $5,650–$10,000 | $4,950–$8,700 |
| 3,500+ sq ft (≈150,000 BTU) | $6,300–$11,100 | $5,500–$9,650 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
What hvac pros earn in each metro
Roughly 60% of what you pay for furnace replacement is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Washington-Arlington-Alexandria metro · about 14% above the US average installer wage.
Virginia Beach-Chesapeake-Norfolk metro · about 10% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
A furnace or AC that dies mid-heat-wave gets replaced at whatever the on-call crew charges. One that gets swapped in April or October gets a competitive, unhurried quote instead.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The brand on the unit matters far less than getting the sizing and installation right. Insist on a Manual J calculation, match efficiency to your climate, and claim every rebate available.
Arlington vs Newport News
Is furnace replacement cheaper in Arlington or Newport News?
Newport News wins on price: furnace replacement runs about $5,300 there versus $6,100 in Arlington, a gap of roughly $800 (15%) as of 2026.
Why does furnace replacement cost more in Arlington than Newport News?
Arlington's higher labor index (1.08 vs 0.94 in Newport News) is the biggest factor, with the mixed/mixed climate split and permit fee differences playing a smaller role.
How much is furnace replacement in Arlington, VA?
furnace replacement in Arlington runs $4,350–$7,850 as of 2026 — most jobs land near $6,100.
Do hvac pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $35.4/hr in Washington-Arlington-Alexandria compared with $28.1/hr in Virginia Beach-Chesapeake-Norfolk (BLS OEWS). Labor is about 60% of a furnace replacement job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy furnace replacement — and does it differ by city?
It doesn't vary by location — Spring and fall (Mar–May, Sep–Oct) is the discount window in both Arlington and Newport News (roughly 5–15% off), while peak summer and mid-winter tends to be the most expensive in either city.
Should I choose where to live based on furnace replacement cost?
Rarely. The $800 difference is real but one-time, and you can often close most of it in Arlington by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik