Furnace Replacement cost: Apple Valley vs Bloomington (2026)
There's essentially no price gap here: furnace replacement runs close to $6,700 in both Apple Valley and Bloomington in 2026.
Apple Valley MN
Typically around $6,700
Bloomington MN
Typically around $6,700
Apple Valley vs Bloomington: full breakdown
| Factor | Apple Valley | Bloomington |
|---|---|---|
| Typical 2026 cost | $6,700 | $6,700 |
| Estimated range | $4,750–$8,600 | $4,750–$8,600 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $225 | $225 |
| Labor share | $4,000 | $4,000 |
| Materials/equipment | $2,700 | $2,700 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
A wash — choose on quality, not city
With no real price gap on furnace replacement, the choice comes down to contractor quality and timing, not which city you're in.
Furnace replacement by type: Apple Valley vs Bloomington
Each furnace replacement option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Apple Valley | Bloomington |
|---|---|---|
| Gas furnace | $4,650–$8,450 | $4,650–$8,450 |
| High-efficiency gas furnace | $4,150–$8,450 | $4,150–$8,450 |
| Electric furnace | $2,600–$5,600 | $2,600–$5,600 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Furnace replacement by home size: Apple Valley vs Bloomington
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Apple Valley | Bloomington |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,550–$6,450 | $3,550–$6,450 |
| 1,500 sq ft (≈68,000 BTU) | $4,150–$7,400 | $4,150–$7,400 |
| 2,000 sq ft (≈90,000 BTU) | $4,750–$8,600 | $4,750–$8,600 |
| 2,500 sq ft (≈110,000 BTU) | $5,500–$9,800 | $5,500–$9,800 |
| 3,000 sq ft (≈130,000 BTU) | $6,200–$11,000 | $6,200–$11,000 |
| 3,500+ sq ft (≈150,000 BTU) | $6,900–$12,200 | $6,900–$12,200 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
What hvac pros earn in each metro
About 60% of a furnace replacement bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Crews are busiest — and priciest — exactly when it's hottest or coldest, since that's when systems fail under load. Book in the mild months and you're negotiating from a position of choice, not a broken furnace.
How much should you really budget for HVAC in 2026?
Get the sizing wrong or the efficiency tier mismatched to your climate, and the price drifts fast in either direction. Below, a look at how those choices — plus brand markup — shape the real number.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The efficiency-first case
Where you face brutal summers or hard winters, a higher SEER2/AFUE system or a heat pump runs enough hours to claw back its premium through lower bills — and utility or state rebates can still trim the sticker even though the federal 25C/25D credits closed at the end of 2025. Do the payback arithmetic before you reach for the cheapest box on the lot.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
If there's one takeaway, it's this: sizing and install quality decide whether an HVAC system performs, not the badge on the box. Get the load calculation right, match efficiency to climate, and take the rebates on offer.
Apple Valley vs Bloomington
Is furnace replacement cheaper in Apple Valley or Bloomington?
Practically identical — expect around $6,700 for furnace replacement whichever city you're in.
Why does furnace replacement cost more in Bloomington than Apple Valley?
Labor rates explain most of it — 1.11 in Bloomington vs 1.11 in Apple Valley. A cold climate versus cold accounts for the rest.
How much is furnace replacement in Apple Valley, MN?
In Apple Valley, furnace replacement typically runs $4,750–$8,600 in 2026, with most homeowners paying around $6,700.
Do hvac pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $36.7/hr in the Minneapolis-St. Paul-Bloomington area and $36.7/hr in Minneapolis-St. Paul-Bloomington. Given labor is around 60% of a furnace replacement job's cost, that gap explains most of the price spread.
When is the cheapest time to buy furnace replacement — and does it differ by city?
Timing doesn't change by city here — Spring and fall (Mar–May, Sep–Oct) is the cheapest window in both Apple Valley and Bloomington, saving roughly 5–15%. Avoid peak summer and mid-winter in either location, when emergency replacements push prices up.
Should I choose where to live based on furnace replacement cost?
Cost shouldn't be the deciding factor between Apple Valley and Bloomington — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik