Furnace Replacement cost: Ankeny vs Davenport (2026)
The two metros aren't quite in sync on furnace replacement: Ankeny sits 2% above Davenport, or roughly $5,750 versus $5,650 — about $100 apart.
Ankeny IA
Typically around $5,750
Davenport IA
Lower costTypically around $5,650
Ankeny vs Davenport: full breakdown
| Factor | Ankeny | Davenport |
|---|---|---|
| Typical 2026 cost | $5,750 | $5,650 |
| Estimated range | $4,100–$7,400 | $4,050–$7,250 |
| Labor index (vs US) | ×0.95 | ×0.93 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $200 | $200 |
| Labor share | $3,450 | $3,400 |
| Materials/equipment | $2,300 | $2,250 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Is the gap worth worrying about?
That 2% gap is small — for furnace replacement it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Furnace replacement by type: Ankeny vs Davenport
Below, each furnace replacement option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Ankeny | Davenport |
|---|---|---|
| Gas furnace | $4,000–$7,300 | $3,950–$7,150 |
| High-efficiency gas furnace | $3,600–$7,300 | $3,550–$7,150 |
| Electric furnace | $2,250–$4,850 | $2,200–$4,750 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
Furnace replacement by home size: Ankeny vs Davenport
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Ankeny | Davenport |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,100–$5,550 | $3,000–$5,450 |
| 1,500 sq ft (≈68,000 BTU) | $3,600–$6,350 | $3,550–$6,250 |
| 2,000 sq ft (≈90,000 BTU) | $4,100–$7,400 | $4,050–$7,250 |
| 2,500 sq ft (≈110,000 BTU) | $4,700–$8,450 | $4,650–$8,250 |
| 3,000 sq ft (≈130,000 BTU) | $5,350–$9,450 | $5,250–$9,300 |
| 3,500+ sq ft (≈150,000 BTU) | $5,950–$10,500 | $5,850–$10,300 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
Cheapest time for furnace replacement in either city
Installers cut prices in spring and fall because job volume drops and crews sit idle — the opposite happens during a summer heat wave or winter cold snap, when a dead system forces homeowners into a full-price emergency swap.
How much should you really budget for HVAC in 2026?
Get the sizing wrong or the efficiency tier mismatched to your climate, and the price drifts fast in either direction. Below, a look at how those choices — plus brand markup — shape the real number.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
If there's one takeaway, it's this: sizing and install quality decide whether an HVAC system performs, not the badge on the box. Get the load calculation right, match efficiency to climate, and take the rebates on offer.
Ankeny vs Davenport
Is furnace replacement cheaper in Ankeny or Davenport?
Davenport comes out ahead here, at roughly $5,650 for furnace replacement compared with $5,750 in Ankeny — a 2% ($100) gap as of 2026.
Why does furnace replacement cost more in Ankeny than Davenport?
It comes down to labor: Ankeny indexes at 0.95 against Davenport's 0.93. The cold-vs-cold climate difference adds to the gap.
How much is furnace replacement in Ankeny, IA?
In Ankeny, furnace replacement typically runs $4,100–$7,400 in 2026, with most homeowners paying around $5,750.
When is the cheapest time to buy furnace replacement — and does it differ by city?
No, the seasonal pattern is the same in Ankeny and Davenport: book during Spring and fall (Mar–May, Sep–Oct) for about 5–15% in savings. Peak summer and mid-winter is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on furnace replacement cost?
Rarely. The $100 difference is real but one-time, and you can often close most of it in Ankeny by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik