Furnace Replacement cost: Aberdeen vs Evansville (2026)
The two metros aren't quite in sync on furnace replacement: Aberdeen sits 4% below Evansville, or roughly $5,450 versus $5,650 — about $200 apart.
Aberdeen SD
Lower costTypically around $5,450
Evansville IN
Typically around $5,650
Aberdeen vs Evansville: full breakdown
| Factor | Aberdeen | Evansville |
|---|---|---|
| Typical 2026 cost | $5,450 | $5,650 |
| Estimated range | $3,900–$7,000 | $4,050–$7,250 |
| Labor index (vs US) | ×0.9 | ×0.93 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.08 | ×1.08 |
| Local permit | $175 | $200 |
| Labor share | $3,250 | $3,400 |
| Materials/equipment | $2,200 | $2,250 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
How much should this gap actually matter?
4% is within noise for furnace replacement — contractor selection and timing move the price more than which of these two metros you're in.
Furnace replacement by type: Aberdeen vs Evansville
Below, each furnace replacement option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Aberdeen | Evansville |
|---|---|---|
| Gas furnace | $3,800–$6,900 | $3,950–$7,150 |
| High-efficiency gas furnace | $3,400–$6,900 | $3,550–$7,150 |
| Electric furnace | $2,150–$4,550 | $2,200–$4,750 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
Furnace replacement by home size: Aberdeen vs Evansville
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Aberdeen | Evansville |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $2,900–$5,250 | $3,000–$5,450 |
| 1,500 sq ft (≈68,000 BTU) | $3,400–$6,050 | $3,550–$6,250 |
| 2,000 sq ft (≈90,000 BTU) | $3,900–$7,000 | $4,050–$7,250 |
| 2,500 sq ft (≈110,000 BTU) | $4,450–$8,000 | $4,650–$8,250 |
| 3,000 sq ft (≈130,000 BTU) | $5,050–$8,950 | $5,250–$9,300 |
| 3,500+ sq ft (≈150,000 BTU) | $5,650–$9,950 | $5,850–$10,300 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
Cheapest time for furnace replacement in either city
Crews are busiest — and priciest — exactly when it's hottest or coldest, since that's when systems fail under load. Book in the mild months and you're negotiating from a position of choice, not a broken furnace.
How much should you really budget for HVAC in 2026?
Ask five contractors for an HVAC quote and you'll get five different numbers — usually because they disagree on sizing, efficiency and equipment tier. Here's how our editors think through those trade-offs.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
Skip the brand debate. A correctly sized system, an efficiency tier that fits your climate, and a properly commissioned install will save you more than any label ever could.
Aberdeen vs Evansville
Is furnace replacement cheaper in Aberdeen or Evansville?
Yes — Evansville costs more. Expect around $5,650 for furnace replacement there against $5,450 in Aberdeen, about $200 (4%) apart in 2026.
Why does furnace replacement cost more in Evansville than Aberdeen?
Evansville's higher labor index (0.93 vs 0.9 in Aberdeen) is the biggest factor, with the cold/cold climate split and permit fee differences playing a smaller role.
How much is furnace replacement in Aberdeen, SD?
In Aberdeen, furnace replacement typically runs $3,900–$7,000 in 2026, with most homeowners paying around $5,450.
When is the cheapest time to buy furnace replacement — and does it differ by city?
No, the seasonal pattern is the same in Aberdeen and Evansville: book during Spring and fall (Mar–May, Sep–Oct) for about 5–15% in savings. Peak summer and mid-winter is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on furnace replacement cost?
Rarely. The $200 difference is real but one-time, and you can often close most of it in Evansville by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik