Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Flat Roof Replacement cost: Edmonds vs Spokane (2026)

Budget-wise, flat roof replacement in Edmonds ($12,250) runs 17% more than in Spokane ($10,500), a roughly $1,750 spread.

Edmonds WA

$6,300 $18,200

Typically around $12,250

Spokane WA

Lower cost
$5,400 $15,550

Typically around $10,500

flat roof replacement runs about $1,750 (17%) more in Edmonds than in Spokane, driven mostly by local labor rates.
Side by side

Edmonds vs Spokane: full breakdown

FactorEdmondsSpokane
Typical 2026 cost$12,250$10,500
Estimated range$6,300–$18,200$5,400–$15,550
Labor index (vs US)×1.19×1.02
Climate zoneMixedMixed
Climate factor×1×1
Local permit$325$300
Labor share$7,350$6,300
Materials/equipment$4,900$4,200

Treat these as 2026 localized estimates for flat roof replacement, not quotes from a contractor.

The verdict

Is the gap worth worrying about?

17% (about $1,750) is enough to notice on a flat roof replacement budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Edmonds can close much of that gap.

By type

Flat roof replacement by type: Edmonds vs Spokane

Every flat roof replacement type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeEdmondsSpokane
EPDM (rubber)$6,300$14,600$5,400$12,500
TPO$7,450$15,800$6,400$13,550
PVC$8,650$18,200$7,450$15,550
Modified bitumen$6,300$13,450$5,400$11,500
Built-up roofing (BUR)$8,050$17,000$6,900$14,550

All figures are 2026 localized planning estimates for flat roof replacement — get an actual quote before you commit.

By size

Flat roof replacement by roof size: Edmonds vs Spokane

Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.

SizeEdmondsSpokane
1,000 sq ft (10 squares)$5,100$10,450$4,350$8,950
1,500 sq ft (15 squares)$6,300$13,450$5,400$11,500
2,000 sq ft (20 squares)$7,450$17,000$6,400$14,550
2,500 sq ft (25 squares)$9,250$19,400$7,950$16,600
3,000+ sq ft (30 squares)$11,050$22,950$9,450$19,650

All figures are 2026 localized planning estimates for flat roof replacement — get an actual quote before you commit.

Local labor reality

What roofing pros earn in each metro

About 60% of a flat roof replacement bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.

Edmonds, WA
$41.1/hr

Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.

Spokane, WA
Modeled from state data

No BLS metro wage series for Spokane; we use Washington regional price parity instead.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for flat roof replacement in either city

Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

The do-it-right case

A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.

Our take

Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.

FAQ

Edmonds vs Spokane

Is flat roof replacement cheaper in Edmonds or Spokane?

Spokane comes out ahead here, at roughly $10,500 for flat roof replacement compared with $12,250 in Edmonds — a 17% ($1,750) gap as of 2026.

Why does flat roof replacement cost more in Edmonds than Spokane?

It comes down to labor: Edmonds indexes at 1.19 against Spokane's 1.02. The mixed-vs-mixed climate difference, plus permit fees, adds to the gap.

How much is flat roof replacement in Edmonds, WA?

In Edmonds, flat roof replacement typically runs $6,300–$18,200 in 2026, with most homeowners paying around $12,250.

When is the cheapest time to buy flat roof replacement — and does it differ by city?

Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Edmonds and Spokane, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.

Should I choose where to live based on flat roof replacement cost?

Rarely. The $1,750 difference is real but one-time, and you can often close most of it in Edmonds by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.

Keep comparing

Compare flat roof replacement in other cities

Updated June 2026 · By Serhat Özçelik