Flat Roof Replacement cost: Bellevue vs Edmonds (2026)
In 2026, Bellevue and Edmonds land on nearly identical flat roof replacement pricing — about $12,250 either way.
Bellevue WA
Typically around $12,250
Edmonds WA
Typically around $12,250
Bellevue vs Edmonds: full breakdown
| Factor | Bellevue | Edmonds |
|---|---|---|
| Typical 2026 cost | $12,250 | $12,250 |
| Estimated range | $6,300–$18,200 | $6,300–$18,200 |
| Labor index (vs US) | ×1.19 | ×1.19 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $7,350 | $7,350 |
| Materials/equipment | $4,900 | $4,900 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national flat roof replacement range for local labor, climate and permits.
No real cost edge either way
The two metros are effectively a wash for flat roof replacement — pick on contractor quality and timing, not location.
Flat roof replacement by type: Bellevue vs Edmonds
Below, each flat roof replacement option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Bellevue | Edmonds |
|---|---|---|
| EPDM (rubber) | $6,300–$14,600 | $6,300–$14,600 |
| TPO | $7,450–$15,800 | $7,450–$15,800 |
| PVC | $8,650–$18,200 | $8,650–$18,200 |
| Modified bitumen | $6,300–$13,450 | $6,300–$13,450 |
| Built-up roofing (BUR) | $8,050–$17,000 | $8,050–$17,000 |
Flat roof replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Flat roof replacement by roof size: Bellevue vs Edmonds
Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.
| Size | Bellevue | Edmonds |
|---|---|---|
| 1,000 sq ft (10 squares) | $5,100–$10,450 | $5,100–$10,450 |
| 1,500 sq ft (15 squares) | $6,300–$13,450 | $6,300–$13,450 |
| 2,000 sq ft (20 squares) | $7,450–$17,000 | $7,450–$17,000 |
| 2,500 sq ft (25 squares) | $9,250–$19,400 | $9,250–$19,400 |
| 3,000+ sq ft (30 squares) | $11,050–$22,950 | $11,050–$22,950 |
Flat roof replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Labor is about 60% of a flat roof replacement bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for flat roof replacement in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Bellevue vs Edmonds
Is flat roof replacement cheaper in Bellevue or Edmonds?
Not really — both cities land at almost the same number for flat roof replacement, around $12,250 each.
Why does flat roof replacement cost more in Edmonds than Bellevue?
It comes down to labor: Edmonds indexes at 1.19 against Bellevue's 1.19. The mixed-vs-mixed climate difference adds to the gap.
How much is flat roof replacement in Bellevue, WA?
Bellevue homeowners can expect $6,300 to $18,200 for flat roof replacement in 2026, with $12,250 the typical number.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $41.1/hr in the Seattle-Tacoma-Bellevue area and $41.1/hr in Seattle-Tacoma-Bellevue. Given labor is around 60% of a flat roof replacement job's cost, that gap explains most of the price spread.
When is the cheapest time to buy flat roof replacement — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Bellevue and Edmonds (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on flat roof replacement cost?
There's no cost argument here between Bellevue and Edmonds — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare flat roof replacement in other cities
Updated June 2026 · By Serhat Özçelik