Flat Roof Replacement cost: Edina vs Rochester (2026)
Edina runs 16% higher than Rochester for flat roof replacement — expect around $11,700 in Edina against $10,050 in Rochester, a difference of about $1,650.
Edina MN
Typically around $11,700
Rochester MN
Lower costTypically around $10,050
Edina vs Rochester: full breakdown
| Factor | Edina | Rochester |
|---|---|---|
| Typical 2026 cost | $11,700 | $10,050 |
| Estimated range | $6,000–$17,400 | $5,150–$14,950 |
| Labor index (vs US) | ×1.11 | ×0.95 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $300 | $250 |
| Labor share | $7,000 | $6,050 |
| Materials/equipment | $4,700 | $4,000 |
All figures are 2026 localized planning estimates for flat roof replacement — get an actual quote before you commit.
Is the price difference a dealbreaker?
16% (about $1,650) is enough to notice on a flat roof replacement budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Edina can close much of that gap.
Flat roof replacement by type: Edina vs Rochester
Every flat roof replacement type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Edina | Rochester |
|---|---|---|
| EPDM (rubber) | $6,000–$14,000 | $5,150–$12,000 |
| TPO | $7,150–$15,100 | $6,150–$13,000 |
| PVC | $8,300–$17,400 | $7,100–$14,950 |
| Modified bitumen | $6,000–$12,850 | $5,150–$11,050 |
| Built-up roofing (BUR) | $7,700–$16,250 | $6,600–$14,000 |
Flat roof replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Flat roof replacement by roof size: Edina vs Rochester
Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.
| Size | Edina | Rochester |
|---|---|---|
| 1,000 sq ft (10 squares) | $4,850–$10,000 | $4,150–$8,600 |
| 1,500 sq ft (15 squares) | $6,000–$12,850 | $5,150–$11,050 |
| 2,000 sq ft (20 squares) | $7,150–$16,250 | $6,150–$14,000 |
| 2,500 sq ft (25 squares) | $8,850–$18,550 | $7,600–$15,950 |
| 3,000+ sq ft (30 squares) | $10,550–$21,950 | $9,100–$18,900 |
Flat roof replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Roughly 60% of what you pay for flat roof replacement is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
No BLS metro wage series for Rochester; we use Minnesota regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for flat roof replacement in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Edina vs Rochester
Is flat roof replacement cheaper in Edina or Rochester?
In 2026, flat roof replacement is cheaper in Rochester at about $10,050, versus $11,700 in Edina — a difference of about $1,650 (16%).
Why does flat roof replacement cost more in Edina than Rochester?
Labor rates explain most of it — 1.11 in Edina vs 0.95 in Rochester. A cold climate versus cold, along with differing permit costs, accounts for the rest.
How much is flat roof replacement in Edina, MN?
flat roof replacement in Edina runs $6,000–$17,400 as of 2026 — most jobs land near $11,700.
When is the cheapest time to buy flat roof replacement — and does it differ by city?
The best window is the same in both Edina and Rochester: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on flat roof replacement cost?
Rarely. The $1,650 difference is real but one-time, and you can often close most of it in Edina by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare flat roof replacement in other cities
Updated June 2026 · By Serhat Özçelik