Flat Roof Replacement cost: Bloomington vs Edina (2026)
Bloomington and Edina are a near-perfect match on flat roof replacement cost in 2026, both landing around $11,700.
Bloomington MN
Typically around $11,700
Edina MN
Typically around $11,700
Bloomington vs Edina: full breakdown
| Factor | Bloomington | Edina |
|---|---|---|
| Typical 2026 cost | $11,700 | $11,700 |
| Estimated range | $6,000–$17,400 | $6,000–$17,400 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $300 | $300 |
| Labor share | $7,000 | $7,000 |
| Materials/equipment | $4,700 | $4,700 |
Flat roof replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
No real cost edge either way
With no real price gap on flat roof replacement, the choice comes down to contractor quality and timing, not which city you're in.
Flat roof replacement by type: Bloomington vs Edina
We localize each flat roof replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Bloomington | Edina |
|---|---|---|
| EPDM (rubber) | $6,000–$14,000 | $6,000–$14,000 |
| TPO | $7,150–$15,100 | $7,150–$15,100 |
| PVC | $8,300–$17,400 | $8,300–$17,400 |
| Modified bitumen | $6,000–$12,850 | $6,000–$12,850 |
| Built-up roofing (BUR) | $7,700–$16,250 | $7,700–$16,250 |
Flat roof replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Flat roof replacement by roof size: Bloomington vs Edina
Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.
| Size | Bloomington | Edina |
|---|---|---|
| 1,000 sq ft (10 squares) | $4,850–$10,000 | $4,850–$10,000 |
| 1,500 sq ft (15 squares) | $6,000–$12,850 | $6,000–$12,850 |
| 2,000 sq ft (20 squares) | $7,150–$16,250 | $7,150–$16,250 |
| 2,500 sq ft (25 squares) | $8,850–$18,550 | $8,850–$18,550 |
| 3,000+ sq ft (30 squares) | $10,550–$21,950 | $10,550–$21,950 |
These are 2026 planning figures for flat roof replacement, localized to each city — not formal quotes.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a flat roof replacement job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for flat roof replacement in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Bloomington vs Edina
Is flat roof replacement cheaper in Bloomington or Edina?
There's no meaningful difference: flat roof replacement runs about $11,700 in both places.
Why does flat roof replacement cost more in Edina than Bloomington?
Labor rates explain most of it — 1.11 in Edina vs 1.11 in Bloomington. A cold climate versus cold accounts for the rest.
How much is flat roof replacement in Bloomington, MN?
Expect to pay $6,000 to $17,400 for flat roof replacement in Bloomington in 2026, averaging around $11,700.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $36.7/hr in Minneapolis-St. Paul-Bloomington compared with $36.7/hr in Minneapolis-St. Paul-Bloomington (BLS OEWS). Labor is about 60% of a flat roof replacement job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy flat roof replacement — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Bloomington and Edina (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on flat roof replacement cost?
There's no cost argument here between Bloomington and Edina — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare flat roof replacement in other cities
Updated June 2026 · By Serhat Özçelik