Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Flat Roof Replacement cost: Burnsville vs St. Paul (2026)

There's essentially no price gap here: flat roof replacement runs close to $11,700 in both Burnsville and St. Paul in 2026.

Burnsville MN

$6,000 $17,400

Typically around $11,700

St. Paul MN

$6,000 $17,400

Typically around $11,700

Side by side

Burnsville vs St. Paul: full breakdown

FactorBurnsvilleSt. Paul
Typical 2026 cost$11,700$11,700
Estimated range$6,000–$17,400$6,000–$17,400
Labor index (vs US)×1.11×1.11
Climate zoneColdCold
Climate factor×1.03×1.03
Local permit$300$300
Labor share$7,000$7,000
Materials/equipment$4,700$4,700

These are 2026 planning figures for flat roof replacement, localized to each city — not formal quotes.

The verdict

Basically a tie — focus on the contractor

Neither metro has a cost edge on flat roof replacement — spend your decision-making energy on the contractor, not the location.

By type

Flat roof replacement by type: Burnsville vs St. Paul

We localize each flat roof replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.

TypeBurnsvilleSt. Paul
EPDM (rubber)$6,000$14,000$6,000$14,000
TPO$7,150$15,100$7,150$15,100
PVC$8,300$17,400$8,300$17,400
Modified bitumen$6,000$12,850$6,000$12,850
Built-up roofing (BUR)$7,700$16,250$7,700$16,250

All figures are 2026 localized planning estimates for flat roof replacement — get an actual quote before you commit.

By size

Flat roof replacement by roof size: Burnsville vs St. Paul

Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.

SizeBurnsvilleSt. Paul
1,000 sq ft (10 squares)$4,850$10,000$4,850$10,000
1,500 sq ft (15 squares)$6,000$12,850$6,000$12,850
2,000 sq ft (20 squares)$7,150$16,250$7,150$16,250
2,500 sq ft (25 squares)$8,850$18,550$8,850$18,550
3,000+ sq ft (30 squares)$10,550$21,950$10,550$21,950

These are 2026 planning figures for flat roof replacement, localized to each city — not formal quotes.

Local labor reality

What roofing pros earn in each metro

About 60% of a flat roof replacement bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.

Burnsville, MN
$36.7/hr

Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.

St. Paul, MN
$36.7/hr

Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for flat roof replacement in either city

Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.

The do-it-right case

A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

Our take

Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.

FAQ

Burnsville vs St. Paul

Is flat roof replacement cheaper in Burnsville or St. Paul?

Practically identical — expect around $11,700 for flat roof replacement whichever city you're in.

Why does flat roof replacement cost more in St. Paul than Burnsville?

Labor rates explain most of it — 1.11 in St. Paul vs 1.11 in Burnsville. A cold climate versus cold accounts for the rest.

How much is flat roof replacement in Burnsville, MN?

flat roof replacement in Burnsville runs $6,000–$17,400 as of 2026 — most jobs land near $11,700.

Do roofing pros really charge more in one city?

Yes — and the wage data shows it. A skilled installer earns about $36.7/hr in the Minneapolis-St. Paul-Bloomington area versus $36.7/hr around Minneapolis-St. Paul-Bloomington (BLS metro wage data). Since labor is roughly 60% of a flat roof replacement job, that wage gap is the biggest reason the installed prices differ.

When is the cheapest time to buy flat roof replacement — and does it differ by city?

The best window is the same in both Burnsville and St. Paul: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.

Should I choose where to live based on flat roof replacement cost?

Not on this basis — Burnsville and St. Paul cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.

Keep comparing

Compare flat roof replacement in other cities

Updated June 2026 · By Serhat Özçelik