Flat Roof Replacement cost: Binghamton vs Yonkers (2026)
Binghamton runs 20% lower than Yonkers for flat roof replacement — expect around $10,050 in Binghamton against $12,050 in Yonkers, a difference of about $2,000.
Binghamton NY
Lower costTypically around $10,050
Yonkers NY
Typically around $12,050
Binghamton vs Yonkers: full breakdown
| Factor | Binghamton | Yonkers |
|---|---|---|
| Typical 2026 cost | $10,050 | $12,050 |
| Estimated range | $5,150–$14,950 | $6,200–$17,900 |
| Labor index (vs US) | ×0.95 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $250 | $325 |
| Labor share | $6,050 | $7,250 |
| Materials/equipment | $4,000 | $4,800 |
Treat these as 2026 localized estimates for flat roof replacement, not quotes from a contractor.
Is the price difference a dealbreaker?
That's a real $2,000 difference (20%) on flat roof replacement — worth factoring in, though off-season timing and a tighter quote in Yonkers can narrow it.
Flat roof replacement by type: Binghamton vs Yonkers
Every flat roof replacement type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Binghamton | Yonkers |
|---|---|---|
| EPDM (rubber) | $5,150–$12,000 | $6,200–$14,400 |
| TPO | $6,150–$13,000 | $7,350–$15,550 |
| PVC | $7,100–$14,950 | $8,550–$17,900 |
| Modified bitumen | $5,150–$11,050 | $6,200–$13,250 |
| Built-up roofing (BUR) | $6,600–$14,000 | $7,950–$16,750 |
Treat these as 2026 localized estimates for flat roof replacement, not quotes from a contractor.
Flat roof replacement by roof size: Binghamton vs Yonkers
Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.
| Size | Binghamton | Yonkers |
|---|---|---|
| 1,000 sq ft (10 squares) | $4,150–$8,600 | $5,000–$10,300 |
| 1,500 sq ft (15 squares) | $5,150–$11,050 | $6,200–$13,250 |
| 2,000 sq ft (20 squares) | $6,150–$14,000 | $7,350–$16,750 |
| 2,500 sq ft (25 squares) | $7,600–$15,950 | $9,100–$19,100 |
| 3,000+ sq ft (30 squares) | $9,100–$18,900 | $10,900–$22,600 |
These are 2026 planning figures for flat roof replacement, localized to each city — not formal quotes.
What roofing pros earn in each metro
With labor making up about 60% of a flat roof replacement job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
No BLS metro wage series for Binghamton; we use New York regional price parity instead.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for flat roof replacement in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Binghamton vs Yonkers
Is flat roof replacement cheaper in Binghamton or Yonkers?
Yes — Yonkers costs more. Expect around $12,050 for flat roof replacement there against $10,050 in Binghamton, about $2,000 (20%) apart in 2026.
Why does flat roof replacement cost more in Yonkers than Binghamton?
The main driver is local labor rates: Yonkers's labor index is 1.14 versus 0.95 in Binghamton. Climate zone (cold vs cold) and permit fees also shift the total.
How much is flat roof replacement in Binghamton, NY?
flat roof replacement in Binghamton runs $5,150–$14,950 as of 2026 — most jobs land near $10,050.
When is the cheapest time to buy flat roof replacement — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Binghamton and Yonkers (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on flat roof replacement cost?
Rarely. The $2,000 difference is real but one-time, and you can often close most of it in Yonkers by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare flat roof replacement in other cities
Updated June 2026 · By Serhat Özçelik