Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Flat Roof Replacement cost: Binghamton vs Syracuse (2026)

In 2026, flat roof replacement is about 1% less expensive in Binghamton than in Syracuse. Most homeowners pay around $10,050 in Binghamton versus $10,200 in Syracuse — a gap of roughly $150.

Binghamton NY

Lower cost
$5,150 $14,950

Typically around $10,050

Syracuse NY

$5,250 $15,150

Typically around $10,200

Syracuse costs about $150 (1%) more than Binghamton for flat roof replacement, largely because of the local labor rate gap.
Side by side

Binghamton vs Syracuse: full breakdown

FactorBinghamtonSyracuse
Typical 2026 cost$10,050$10,200
Estimated range$5,150–$14,950$5,250–$15,150
Labor index (vs US)×0.95×0.96
Climate zoneColdCold
Climate factor×1.03×1.03
Local permit$250$275
Labor share$6,050$6,100
Materials/equipment$4,000$4,100

Flat roof replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

The verdict

Is the price difference a dealbreaker?

1% is within noise for flat roof replacement — contractor selection and timing move the price more than which of these two metros you're in.

By type

Flat roof replacement by type: Binghamton vs Syracuse

Every flat roof replacement type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeBinghamtonSyracuse
EPDM (rubber)$5,150$12,000$5,250$12,200
TPO$6,150$13,000$6,250$13,200
PVC$7,100$14,950$7,250$15,150
Modified bitumen$5,150$11,050$5,250$11,200
Built-up roofing (BUR)$6,600$14,000$6,750$14,200

All figures are 2026 localized planning estimates for flat roof replacement — get an actual quote before you commit.

By size

Flat roof replacement by roof size: Binghamton vs Syracuse

Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.

SizeBinghamtonSyracuse
1,000 sq ft (10 squares)$4,150$8,600$4,250$8,700
1,500 sq ft (15 squares)$5,150$11,050$5,250$11,200
2,000 sq ft (20 squares)$6,150$14,000$6,250$14,200
2,500 sq ft (25 squares)$7,600$15,950$7,700$16,150
3,000+ sq ft (30 squares)$9,100$18,900$9,200$19,150

Localized 2026 planning estimates — not quotes. Each city adjusts the national flat roof replacement range for local labor, climate and permits.

Best time to buy

Cheapest time for flat roof replacement in either city

Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.

The do-it-right case

A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.

The value case

Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.

The risk case

The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.

Our take

The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.

FAQ

Binghamton vs Syracuse

Is flat roof replacement cheaper in Binghamton or Syracuse?

Yes — Syracuse costs more. Expect around $10,200 for flat roof replacement there against $10,050 in Binghamton, about $150 (1%) apart in 2026.

Why does flat roof replacement cost more in Syracuse than Binghamton?

It comes down to labor: Syracuse indexes at 0.96 against Binghamton's 0.95. The cold-vs-cold climate difference, plus permit fees, adds to the gap.

How much is flat roof replacement in Binghamton, NY?

Expect to pay $5,150 to $14,950 for flat roof replacement in Binghamton in 2026, averaging around $10,050.

When is the cheapest time to buy flat roof replacement — and does it differ by city?

The best window is the same in both Binghamton and Syracuse: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.

Should I choose where to live based on flat roof replacement cost?

Not really — the $150 gap is one-time, and smart timing and tighter quotes in Syracuse can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.

Keep comparing

Compare flat roof replacement in other cities

Updated June 2026 · By Serhat Özçelik