Windows · Staten Island, NY
How much does wood and fiberglass window replacement cost in Staten Island, NY? (2026)
In Staten Island, wood and fiberglass window replacement runs $11,850–$29,450, with most paying around $20,650 — about 18% above the national average. Whole-home window replacement with premium wood or fiberglass windows — higher cost, better looks and longevity.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $20,650
- Typical cost
- $20,650
- Labor vs US
- +13%
- Climate
- Cold
- Local permit
- $125
Refine your estimate
Tune it to your home to narrow the wood and fiberglass window replacement range.
Key takeaways for Staten Island
- In Staten Island, wood and fiberglass window replacement runs $11,850–$29,450 — call it $20,650 for a typical job, about 18% above the national average.
- Staten Island labor runs +13% versus the US average — the main reason the local price differs from the national figure.
- Set aside roughly $125 for the permit; that's already part of the range above, not an add-on.
- Expect 30–50 years of service, so planning a replacement beats a full-price emergency call.
- Time it right and you can save 5–15%: the best window to book is Late fall and winter.
- Federal 25C/25D tax credits and local utility rebates can lower the net cost — see the rebates section below.
What goes into the price in Staten Island
A typical Staten Island wood and fiberglass window replacement of $20,650 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Staten Island 2026 range |
|---|---|
| Materials & equipmentUnit, materials and supplies — priced close to the national level. | $5,300 – $13,200 |
| Labor & installationInstall crew, removal and startup — the part local rates move most. | $6,425 – $16,125 |
| Permit & feesTypical local Windows permit, scaled to this metro. | $125 |
| Total installed cost | $11,850 – $29,450 |
Split from the Staten Island estimate using a 55% local-labor share; line items sum to the total.
Why wood and fiberglass window replacement costs what it does in Staten Island
- Expect labor here to run 13% above the national norm (based on price levels for the New York-Newark-Jersey City metro area) — that's what raises the total.
- The cold climate in Staten Island adds roughly 4% to typical wood and fiberglass window replacement pricing versus a neutral climate.
- Staten Island's Windows permit runs roughly $125, which is already part of the number above.
Wood & Fiberglass Window Replacement cost by number of windows in Staten Island
Wood and fiberglass windows are a premium upgrade — figure roughly $800–$2,500 per window installed depending on material, size, and finish. Cost scales with the number of openings, and wood typically runs higher than fiberglass.
| number of windows | Staten Island 2026 range |
|---|---|
| 5 windows | $5,400 – $13,000 |
| 10 windows | $10,650 – $23,550 |
| 15 windows | $15,950 – $32,950 |
| 20 windows | $21,200 – $42,300 |
| 25+ windows (whole home) | $25,900 – $52,850 |
National size ranges localized to Staten Island labor and climate.
Wood & Fiberglass Window Replacement cost by type in Staten Island
| Fiberglass | $11,900 – $26,000 |
| Composite | $13,050 – $27,150 |
| Aluminum-clad wood | $15,400 – $31,850 |
| Solid wood | $16,600 – $35,400 |
Adjusted to Staten Island from national type-level ranges.
Wood & Fiberglass Window Replacement cost by efficiency in Staten Island
Frame material sets the price and the look. Fiberglass is durable and low-maintenance; wood (often clad in aluminum outside) offers the richest appearance but costs more. The glass package adds on top. Prices are per window installed.
| Fiberglass frame (double-pane low-E)Strong, stable, very low maintenance | $850 – $1,750 |
| Wood frame / aluminum-clad woodPremium look; needs periodic finishing | $1,300 – $2,700 |
| Triple-pane premium (wood or fiberglass)Top efficiency and sound control | $1,750 – $3,400 |
Labor vs. materials in Staten Island
Install crew, removal, permit & startup — the part Staten Island rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $20,650 Staten Island project; your mix varies with scope.
Skilled installers in the New York-Newark-Jersey City area earn about $38.3/hr (23% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your wood and fiberglass window replacement cost.
How we estimate it
| National range | $10,000 – $25,000 |
| Staten Island labor adjustment | ×1.13 |
| cold climate factor | ×1.04 |
| Local permit | +$125 |
| Staten Island estimate | $11,850 – $29,450 |
Promo prices vs. the real cost
Before you anchor on an advertised per-window rate, check what it leaves out of the installed price:
- Free in-home estimate$0 — it's a sales visit
- "From $189/window" teaserinstall, trim & disposal usually extra
- Financing offers$0 down · 0% APR, 12–60 mo
- "Buy 2, get 2" / BOGO dealsdiscount is off an inflated list price
Additional wood and fiberglass window replacement costs to budget for
These aren't always in the headline price. Whether you'll pay them depends on your home's condition and setup.
| Old window removal & disposalPer window; usually bundled into the quote | $30 – $75 |
| Full-frame (vs. insert/pocket) replacementPer window; standard for wood to flash properly | $150 – $450 |
| Rotted sill / frame repairPer opening, found after removal | $200 – $800 |
| Custom or non-standard size / shapeBay, bow, arched, or oversized units cost more | $200 – $1,000 |
| Interior/exterior trim, casing & stainingPer window; wood often gets a stained finish | $100 – $400 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Interior and exterior trim
- Premium wood or fiberglass windows
- Old window removal
- Installation, flashing and sealing
What affects the cost
- Material (fiberglass vs solid wood vs clad)
- Custom sizing and shapes
- Historic or architectural matching
- Number of windows
Ways to save on wood and fiberglass window replacement in Staten Island
- Check efficiency rebates
- Fiberglass costs less than wood with similar looks
- Bundle the whole house in one job
- Use premium only where visible, vinyl elsewhere
How long does wood and fiberglass window replacement last in Staten Island?
Fiberglass lasts 30–50+ years; well-maintained wood can match it, but neglected wood rots far sooner.
Fiberglass is nearly maintenance-free. Wood (and the exterior of clad units) needs periodic repainting or re-staining and seal checks.
Signs you need wood and fiberglass window replacement in Staten Island
- Windows stick, swell, or are hard to open and close
- Fog or condensation appears between the panes (the seal has failed)
- Wood frames show rot, soft spots, peeling paint, or water staining
- You feel drafts near the window when it's shut
- They're single-pane originals and energy bills are high
- Visible warping, cracking, or daylight around the sash
- Outside noise comes through easily
Repair or replace in Staten Island?
Repair if…
- The wood frame is structurally sound and just needs refinishing or minor rot repair
- Only the seal, weatherstripping, or hardware has failed
- It's a historic or character window worth restoring
- The unit is under warranty
Replace if…
- Condensation is sealed between the panes (the IGU seal is gone)
- Rot has spread into the structural frame or sill
- They're single-pane and you want major energy savings
- Several windows are failing — bulk replacement lowers per-window cost
Climate-zone spec
What window rating you need in Staten Island, NY
Staten Island, NY sits in a cold climate — the Northern ENERGY STAR window zone. To qualify for ENERGY STAR (v7.0), replacement windows here should meet:
In cold climates, a low U-factor (insulating value) matters most — it cuts heat loss and heating bills. A modest solar heat gain (SHGC) is even helpful for passive winter warmth.
Thresholds from ENERGY STAR Residential Windows v7.0. Costadia groups cities into cold / mixed / hot bands — for your exact county's zone, use the ENERGY STAR Climate Zone Finder. Source.
Rebates & incentives
The federal window tax credit is gone for 2026, but ENERGY STAR windows can still earn utility rebates in some areas — and the real long-run savings come from lower heating and cooling bills.
- The federal 25C tax credit (up to $600/yr for ENERGY STAR Most Efficient windows) ended December 31, 2025 under the One Big Beautiful Bill Act — not available for 2026.
- Some utilities still rebate high-efficiency windows — real examples include Mass Save (~$75/window on single-pane replacements) and Puget Sound Energy (up to $100/window, more for income-qualified, through 2026).
- There is no federal HEAR rebate for windows (that program targets electrification equipment like heat pumps), so utility and state programs are the path — check the DSIRE database.
- The durable savings are on your energy bills: right-rated windows for your climate zone cut heating/cooling costs every year (see the climate-zone spec above).
Verified July 2026. Program budgets and windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database. Costadia does not administer these programs.
Rebates & tax credits
The federal 25C window tax credit (30%, up to $600) ended December 31, 2025 and no longer applies to 2026 installs. ENERGY STAR Most Efficient wood or fiberglass windows still pay back through lower energy bills, and many utilities and states offer their own rebates — check the DSIRE database.
Cheapest time for wood and fiberglass window replacement in Staten Island
Demand for window installs drops once it's cold out, which is precisely when manufacturers push their biggest rebates — a combination that doesn't happen in the busy spring and summer months.
Why wood and fiberglass window replacement quotes vary — and how to compare them fairly
Two bids for the “same” job can differ by thousands. Usually it's scope, not greed — here's what moves the number and how to get an apples-to-apples comparison.
Why a quote looks high (or low)
- Frame material — vinyl, wood, fiberglass — is a big driver.
- Full-frame replacement costs more than an insert (pocket) install — make sure bids match.
- Trim, disposal and exterior flashing/caulking may be excluded.
Get an apples-to-apples bid
- Match the glass package and ENERGY STAR rating across quotes.
- Specify full-frame vs. insert for every bid.
- Confirm disposal, trim and flashing are included.
- Check warranties on frame, glass seal and labor separately.
Questions to ask Staten Island Windows pros
Comparing quotes is only fair when they cover the same scope. Ask every bidder these before you sign.
- 1Is this a full-frame replacement or an insert (pocket) install?
- 2What's the glass package — double vs. triple pane, low-E coating, gas fill?
- 3Are disposal, trim, and exterior caulking/flashing included?
- 4Are the windows ENERGY STAR rated for my climate zone?
- 5What's the warranty on the frame, glass seal, and the installation labor?
Wood & Fiberglass Window Replacement in Staten Island
How much does wood and fiberglass window replacement cost in Staten Island, NY?
wood and fiberglass window replacement in Staten Island runs $11,850–$29,450 as of 2026, with $20,650 the figure most homeowners actually land on. Local labor, the cold climate and permit fees are all baked into that number.
Is wood and fiberglass window replacement more expensive in Staten Island than average?
Yes — Staten Island is about 18% higher than the national average, largely a function of local labor pricing at 1.13× the US average., and factor in about $125 for the local Windows permit.
Do I need a permit for wood and fiberglass window replacement in Staten Island?
A Windows permit is standard in Staten Island for this kind of work, at roughly $125. You won't need to add it on top of the estimate above — it's already there.
What affects wood and fiberglass window replacement cost the most?
In plain terms, whole-home window replacement with premium wood or fiberglass windows — higher cost, better looks and longevity. Price swings mostly come down to equipment or material grade, the size and complexity of the home, local labor, and the cold climate zone.
How much should new windows really cost you?
A window budget rests on three choices — frame material, glass package and how it's installed. Our editors weigh in on where the money is well spent.
The install case
A perfect window installed badly leaks and fails. Full-frame replacement with proper flashing beats a cheap pocket insert in a rotted opening — match the install method to your home's condition, not just the price.
The value case
Vinyl, double-pane, low-E windows deliver most of the comfort and efficiency for the lowest price. For whole-home replacements on a budget, they're the sensible default.
The efficiency case
In extreme climates, triple-pane or premium low-E/gas-fill glass pays back in comfort and bills — and ENERGY STAR units may unlock rebates. Spend on the glass package before the frame upgrade.
Buy the glass package your climate needs, default to vinyl frames unless you have a reason not to, and never let install quality be the thing you cut to hit a number.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national wood and fiberglass window replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Staten Island using the BLS metro wage data labor index (×1.13 here), the IECC cold-climate factor (×1.04) and a typical local permit fee (≈$125). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Staten Island wood and fiberglass window replacement estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Wood and fiberglass window replacement alternatives in Staten Island
Homeowners in Staten Island often pair this with
A wood and fiberglass window replacement rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Staten Island
Browse local 2026 costs for every home project in Staten Island, NY.