Tank Water Heater Replacement cost in Washington (2026)
Across Washington, tank water heater replacement varies by your city's labor rates, climate and permit fees. Select your city below for a localized estimate.
tank water heater replacement typically falls in this range across 28 Washington cities — your exact estimate depends on local rates.
| City | Typical 2026 range |
|---|---|
| Seattle, WA | $1,450 – $3,800 |
| Spokane, WA | $1,250 – $3,300 |
| Tacoma, WA | $1,450 – $3,800 |
| Vancouver, WA | $1,350 – $3,500 |
| Bellevue, WA | $1,450 – $3,800 |
| Kent, WA | $1,450 – $3,800 |
| Everett, WA | $1,450 – $3,800 |
| Renton, WA | $1,450 – $3,800 |
| Yakima, WA | $1,250 – $3,250 |
| Federal Way, WA | $1,450 – $3,800 |
| Spokane Valley, WA | $1,250 – $3,300 |
| Kirkland, WA | $1,450 – $3,800 |
| Bellingham, WA | $1,300 – $3,350 |
| Kennewick, WA | $1,250 – $3,300 |
| Auburn, WA | $1,450 – $3,800 |
| Pasco, WA | $1,250 – $3,300 |
| Marysville, WA | $1,300 – $3,350 |
| Lakewood, WA | $1,450 – $3,800 |
| Redmond, WA | $1,450 – $3,800 |
| Shoreline, WA | $1,450 – $3,800 |
| Richland, WA | $1,250 – $3,300 |
| Sammamish, WA | $1,450 – $3,800 |
| Burien, WA | $1,450 – $3,800 |
| Olympia, WA | $1,300 – $3,400 |
| Lacey, WA | $1,300 – $3,400 |
| Edmonds, WA | $1,450 – $3,800 |
| Bremerton, WA | $1,350 – $3,450 |
| Puyallup, WA | $1,450 – $3,800 |
Tank Water Heater Replacement cost by type in Washington
Typical 2026 ranges, localized to Washington labor, climate and permits.
| Type | Washington 2026 range |
|---|---|
| Gas (40–50 gal) | $1,450 – $2,300 |
| Electric (40–50 gal) | $1,250 – $2,050 |
| High-capacity (75 gal) | $2,300 – $3,800 |
Cheapest time for tank water heater replacement in Washington
Tanks fail most in winter when incoming water is cold and demand is high — emergency-rate territory. Replacing a 10+ year-old unit proactively in a slow month avoids the premium.
Cost to run
Yearly running cost — what most cost guides skip
Install price is only half the story. Over 10 years, the fuel bill often outweighs the price difference between models. National operating-cost estimates below (FTC EnergyGuide):
| Type | Per year | 10-year fuel |
|---|---|---|
Heat pump water heaterCheapest to run Cheapest to run — pulls heat from the air, ~3–4× more efficient than resistance. | $130 | $1,300 |
Gas tankless On-demand gas; no standby loss, so cheaper to run than a gas tank. | $270 | $2,700 |
Gas storage tank Low running cost where natural gas is cheap; some standby heat loss. | $330 | $3,300 |
Electric tankless On-demand electric; needs a heavy electrical service upgrade. | $500 | $5,000 |
Electric storage tankThis page Cheapest to buy, most expensive to run at national electricity prices. | $570 | $5,700 |
Verified July 2026. Figures use FTC EnergyGuide / DOE (national average fuel prices) — your state's fuel prices move them: where electricity is cheap or gas is expensive the ranking shifts. Check current EIA residential energy prices for your state.
Tank Water Heater Replacement in Washington
How much does tank water heater replacement cost in Washington?
Across Washington, tank water heater replacement typically runs $1,250–$3,800 in 2026, depending on your city's labor rates, climate and permit fees. Yakima is the most affordable (around $2,250) and Puyallup the most expensive (around $2,650).
Which Washington city is cheapest for tank water heater replacement?
Yakima has the lowest typical tank water heater replacement cost in Washington at about $2,250, while Puyallup is the highest at about $2,650 — a gap driven mostly by local labor rates.
How do other Water Heaters options compare in Washington?
In Seattle, Washington's largest market, tank water heater replacement typically runs $1,450–$3,800. For comparison, tankless water heater installation runs $3,100–$6,750, heat pump water heater installation runs $2,900–$5,350. Each option has its own Washington cost guide with city-by-city pricing.
Why does tank water heater replacement cost vary across Washington?
The three levers are local labor rates, climate zone and permit fees. In this mixed-climate region, plan tank water heater replacement capacity around your household's peak demand, since incoming water temperature swings moderately through the year. A mid-capacity unit sized to your household's peak demand covers both seasons well.
When is the cheapest time to replace in Washington?
The best window is spring and early fall, when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The priciest time is an emergency job during deep winter (failure season).
Does Washington require a permit for tank water heater replacement?
Most Washington cities require a permit for tank water heater replacement; it typically adds around $175 and is already included in the estimates above.
Other Water Heaters projects in Washington
Weighing your options? Typical 2026 ranges below are localized to Seattle, Washington's largest market — open any project for the full statewide breakdown.