Roofing · Plymouth, MN
How much does tile roof installation cost in Plymouth, MN? (2026)
In Plymouth, tile roof installation runs $11,900–$27,950, with most paying around $19,950 — about 12% above the national average. Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $19,950
- Typical cost
- $19,950
- Labor vs US
- +3%
- Climate
- Cold
- Local permit
- $300
Refine your estimate
Tune it to your home to narrow the tile roof installation range.
Key takeaways for Plymouth
- $11,900 on the low end, $27,950 on the high — tile roof installation in Plymouth averages $19,950, about 12% above the national average.
- Local labor in Plymouth is +3% relative to the national average, which is what pushes this estimate away from the countrywide number.
- A Roofing permit in Plymouth runs about $300 — it's already folded into the estimate above.
- Count on 50–100 years from a solid install; timing the next job yourself avoids the emergency premium.
- Late spring to early fall (dry, 45–85°F) is the low-price window — about 5–10% under peak rates.
What goes into the price in Plymouth
A typical Plymouth tile roof installation of $19,950 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Plymouth 2026 range |
|---|---|
| Materials & equipmentHardware and supplies for the job; national pricing applies almost everywhere you go. | $4,650 – $11,050 |
| Labor & installationLabor to remove the old system and install the new one — this is where your city's wage index shows up. | $6,950 – $16,600 |
| Permit & feesRoofing permit cost, adjusted to this city's rate. | $300 |
| Total installed cost | $11,900 – $27,950 |
Split from the Plymouth estimate using a 60% local-labor share; line items sum to the total.
Why tile roof installation costs what it does in Plymouth
- Plymouth's labor rates sit about 3% higher than the national average (based on price levels for the Minneapolis-St. Paul-Bloomington metro area), pushing the price up.
- Budget about $300 for the local Roofing permit in Plymouth — already folded into the estimate above.
Tile Roof Installation cost by roof size in Plymouth
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| roof size | Plymouth 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,050 – $15,800 |
| 1,500 sq ft (15 squares) | $10,250 – $21,350 |
| 2,000 sq ft (20 squares) | $11,900 – $27,950 |
| 2,500 sq ft (25 squares) | $14,700 – $33,500 |
| 3,000+ sq ft (30 squares) | $18,000 – $40,150 |
National size ranges localized to Plymouth labor and climate.
Tile Roof Installation cost by type in Plymouth
| Concrete tile | $11,950 – $23,600 |
| Clay / terracotta tile | $15,850 – $31,400 |
| Slate | $22,500 – $55,800 |
Adjusted to Plymouth from national type-level ranges.
Tile Roof Installation cost by efficiency in Plymouth
Concrete is the affordable workhorse; clay (terracotta) holds its color and resists fade in hot, sunny climates; slate is the premium natural-stone option with the longest life.
| Concrete tileLowest-cost tile; heavy; ~50 yr life | $11,900 – $22,450 |
| Clay / terracotta tileFade-resistant, ideal in hot/coastal climates; 50–100 yr | $15,800 – $27,950 |
| Natural slatePremium stone; 75–100+ yr life | $22,450 – $50,100 |
Labor vs. materials in Plymouth
Install crew, removal, permit & startup — the part Plymouth rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $19,950 Plymouth project; your mix varies with scope.
Skilled installers in the Minneapolis-St. Paul-Bloomington area earn about $36.7/hr (18% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your tile roof installation cost.
How we estimate it
| National range | $10,500 – $25,000 |
| Plymouth labor adjustment | ×1.11 |
| cold climate factor | ×1 |
| Local permit | +$300 |
| Plymouth estimate | $11,900 – $27,950 |
Promo prices vs. the real cost
Storm-season ads push low headline prices — confirm scope before you compare:
- Free roof inspection$0 — it's a sales visit
- Per-square teaser priceadvertised low; varies by pitch & material
- Financing offers$0 down · low APR
Additional tile roof installation costs to budget for
Expect a few of these rather than all. Which ones apply tracks with access, hidden damage and local code.
| Tear-off & disposal of old roofTile is heavy — disposal costs more than asphalt | $1,000 – $4,000 |
| Structural reinforcement for tile weightOften required; tile is much heavier than asphalt | $1,000 – $10,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-grade, replaced mid-life)Underlayment wears out before the tile and is re-done | $500 – $2,500 |
| Flashing, valleys & ridge work | $500 – $2,500 |
| Permit | $200 – $600 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Reinforced underlayment and battens
- Concrete or clay tiles
- Tear-off and structural check
- Labor, cleanup and permit
What affects the cost
- Pitch, complexity and hip/valley count
- Specialty flashing and ridge work
- Concrete vs clay tile
- Roof structure may need reinforcement for tile weight
Ways to save on tile roof installation in Plymouth
- Concrete tile costs less than clay with similar life
- Tiles last 50+ years — strong lifetime value
- Confirm framing can carry the load before buying
- Reuse intact tiles where possible on repairs
How long does tile roof installation last in Plymouth?
Concrete tile lasts ~50 years; clay and slate 75–100+. The underlayment beneath is usually replaced once mid-life.
Inspect for cracked or slipped tiles and clear debris; the bigger periodic cost is replacing worn underlayment.
Signs you need tile roof installation in Plymouth
- Cracked, chipped, or broken tiles after hail, foot traffic, or freeze-thaw
- Slipped or missing tiles leaving gaps in the field
- Leaks or attic moisture pointing to failed underlayment beneath sound tiles
- Efflorescence, deep staining, or flaking on the tile surface
- Sagging areas — a sign the structure is straining under the weight
- Failed flashing in valleys or around penetrations
Repair or replace in Plymouth?
Repair if…
- Only a handful of tiles are cracked or slipped
- The underlayment is still sound and leaks are isolated
- Flashing has failed but tiles and structure are fine
Replace if…
- The underlayment has failed across the roof (consider a lift-and-relay first)
- Widespread tile cracking or fading from age or hail
- The roof structure is sagging or can't support the load
Cost calculator
Roof cost by material in Plymouth, MN
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Plymouth, MN labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $7,750–$13,300 | $400/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $8,900–$17,750 | $550/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $20,000–$35,500 | $500/yr |
Clay / concrete tileThis page Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $22,200–$44,400 | $550/yr |
Per-square ranges are national installed benchmarks localized to Plymouth, MN labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for tile roof installation in Plymouth
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Why tile roof installation quotes vary — and how to compare them fairly
Price differences on an identical job trace back to the assumptions each contractor made; understand those and the 'expensive' bid often turns out fair.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
Get an apples-to-apples bid
- Verify the contractor is licensed, insured and local, with recent references.
- Ask how deck/sheathing repairs are priced if rot is found.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Specify tear-off vs. overlay so all bids match.
Questions to ask Plymouth Roofing pros
Level the field before you choose — ask each bidder the same questions and watch how the answers differ.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Tile Roof Installation in Plymouth
How much does tile roof installation cost in Plymouth, MN?
Expect to pay $11,900 to $27,950 for tile roof installation in Plymouth in 2026 — most quotes cluster around $19,950. That's not a national average — it's adjusted for Plymouth labor rates, cold-climate factors and permit fees.
Is tile roof installation more expensive in Plymouth than average?
Yes — Plymouth is about 12% higher than the national average, largely a function of local labor pricing at 1.11× the US average. (a local Roofing permit tacks on about $300).
Do I need a permit for tile roof installation in Plymouth?
Do you need a permit? For this work in Plymouth, yes — a Roofing permit at roughly $300, and the estimate above already carries it.
What affects tile roof installation cost the most?
Here's the short version: installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates. Your cold climate zone plays a part, but equipment/material grade, the size and complexity of the home, and local labor rates weigh in just as heavily.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national tile roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Plymouth using the BLS metro wage data labor index (×1.11 here), the IECC cold-climate factor (×1) and a typical local permit fee (≈$300). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Plymouth tile roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Tile roof installation alternatives in Plymouth
Homeowners in Plymouth often pair this with
A tile roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Plymouth
Browse local 2026 costs for every home project in Plymouth, MN.