Roofing · Park Slope, NY
How much does tile roof installation cost in Park Slope, NY? (2026)
In Park Slope, tile roof installation runs $12,300–$28,800, with most paying around $20,550 — about 16% above the national average. Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $20,550
- Typical cost
- $20,550
- Labor vs US
- +13%
- Climate
- Cold
- Local permit
- $325
Refine your estimate
Tune it to your home to narrow the tile roof installation range.
Key takeaways for Park Slope
- A tile roof installation in Park Slope typically runs $12,300–$28,800, with most homeowners paying about $20,550 — about 16% above the national average.
- Park Slope labor runs +13% versus the US average — the main reason the local price differs from the national figure.
- Set aside roughly $325 for the permit; that's already part of the range above, not an add-on.
- Expect 50–100 years of service, so planning a replacement beats a full-price emergency call.
- Cheapest time to buy: Late spring to early fall (dry, 45–85°F) — roughly 5–10% off peak-season pricing.
What goes into the price in Park Slope
A typical Park Slope tile roof installation of $20,550 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Park Slope 2026 range |
|---|---|
| Materials & equipmentEquipment and supplies, which price out close to the national baseline. | $4,800 – $11,400 |
| Labor & installationCrew time for removal, installation and startup; local labor rates drive most of the swing here. | $7,175 – $17,075 |
| Permit & feesWhat this city's building department charges for a Roofing permit. | $325 |
| Total installed cost | $12,300 – $28,800 |
Split from the Park Slope estimate using a 60% local-labor share; line items sum to the total.
Why tile roof installation costs what it does in Park Slope
- Labor in Park Slope runs about 13% above the national average (based on price levels for the New York-Newark-Jersey City metro area), which raises the installed price.
- A Roofing permit in Park Slope costs around $325, included above.
Tile Roof Installation cost by roof size in Park Slope
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| roof size | Park Slope 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,300 – $16,250 |
| 1,500 sq ft (15 squares) | $10,550 – $21,950 |
| 2,000 sq ft (20 squares) | $12,300 – $28,800 |
| 2,500 sq ft (25 squares) | $15,150 – $34,500 |
| 3,000+ sq ft (30 squares) | $18,550 – $41,300 |
National size ranges localized to Park Slope labor and climate.
Tile Roof Installation cost by type in Park Slope
| Concrete tile | $12,300 – $24,250 |
| Clay / terracotta tile | $16,300 – $32,250 |
| Slate | $23,100 – $57,300 |
Adjusted to Park Slope from national type-level ranges.
Tile Roof Installation cost by efficiency in Park Slope
Concrete is the affordable workhorse; clay (terracotta) holds its color and resists fade in hot, sunny climates; slate is the premium natural-stone option with the longest life.
| Concrete tileLowest-cost tile; heavy; ~50 yr life | $12,300 – $23,100 |
| Clay / terracotta tileFade-resistant, ideal in hot/coastal climates; 50–100 yr | $16,250 – $28,800 |
| Natural slatePremium stone; 75–100+ yr life | $23,100 – $51,550 |
Labor vs. materials in Park Slope
Install crew, removal, permit & startup — the part Park Slope rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $20,550 Park Slope project; your mix varies with scope.
Skilled installers in the New York-Newark-Jersey City area earn about $38.3/hr (23% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your tile roof installation cost.
How we estimate it
| National range | $10,500 – $25,000 |
| Park Slope labor adjustment | ×1.14 |
| cold climate factor | ×1 |
| Local permit | +$325 |
| Park Slope estimate | $12,300 – $28,800 |
Promo prices vs. the real cost
Storm-season ads push low headline prices — confirm scope before you compare:
- Per-square teaser priceadvertised low; varies by pitch & material
- Free roof inspection$0 — it's a sales visit
- Financing offers$0 down · low APR
Additional tile roof installation costs to budget for
These aren't always in the headline price. Whether you'll pay them depends on your home's condition and setup.
| Tear-off & disposal of old roofTile is heavy — disposal costs more than asphalt | $1,000 – $4,000 |
| Structural reinforcement for tile weightOften required; tile is much heavier than asphalt | $1,000 – $10,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-grade, replaced mid-life)Underlayment wears out before the tile and is re-done | $500 – $2,500 |
| Flashing, valleys & ridge work | $500 – $2,500 |
| Permit | $200 – $600 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Labor, cleanup and permit
- Concrete or clay tiles
- Tear-off and structural check
- Reinforced underlayment and battens
What affects the cost
- Concrete vs clay tile
- Pitch, complexity and hip/valley count
- Specialty flashing and ridge work
- Roof structure may need reinforcement for tile weight
Ways to save on tile roof installation in Park Slope
- Confirm framing can carry the load before buying
- Reuse intact tiles where possible on repairs
- Concrete tile costs less than clay with similar life
- Tiles last 50+ years — strong lifetime value
How long does tile roof installation last in Park Slope?
Concrete tile lasts ~50 years; clay and slate 75–100+. The underlayment beneath is usually replaced once mid-life.
Inspect for cracked or slipped tiles and clear debris; the bigger periodic cost is replacing worn underlayment.
Signs you need tile roof installation in Park Slope
- Cracked, chipped, or broken tiles after hail, foot traffic, or freeze-thaw
- Slipped or missing tiles leaving gaps in the field
- Leaks or attic moisture pointing to failed underlayment beneath sound tiles
- Efflorescence, deep staining, or flaking on the tile surface
- Sagging areas — a sign the structure is straining under the weight
- Failed flashing in valleys or around penetrations
Repair or replace in Park Slope?
Repair if…
- Only a handful of tiles are cracked or slipped
- The underlayment is still sound and leaks are isolated
- Flashing has failed but tiles and structure are fine
Replace if…
- The underlayment has failed across the roof (consider a lift-and-relay first)
- Widespread tile cracking or fading from age or hail
- The roof structure is sagging or can't support the load
Cost calculator
Roof cost by material in Park Slope, NY
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Park Slope, NY labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $8,000–$13,700 | $400/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $9,100–$18,250 | $550/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $20,500–$36,500 | $500/yr |
Clay / concrete tileThis page Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $22,800–$45,600 | $550/yr |
Per-square ranges are national installed benchmarks localized to Park Slope, NY labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for tile roof installation in Park Slope
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Why tile roof installation quotes vary — and how to compare them fairly
Two bids for the “same” job can differ by thousands. Usually it's scope, not greed — here's what moves the number and how to get an apples-to-apples comparison.
Why a quote looks high (or low)
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
Get an apples-to-apples bid
- Specify tear-off vs. overlay so all bids match.
- Ask how deck/sheathing repairs are priced if rot is found.
- Verify the contractor is licensed, insured and local, with recent references.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
Questions to ask Park Slope Roofing pros
Comparing quotes is only fair when they cover the same scope. Ask every bidder these before you sign.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Tile Roof Installation in Park Slope
How much does tile roof installation cost in Park Slope, NY?
In Park Slope, tile roof installation typically costs $12,300 to $28,800 in 2026, with most homeowners paying around $20,550. Local labor, the cold climate and permit fees are all baked into that number.
Is tile roof installation more expensive in Park Slope than average?
Park Slope is about 16% higher than the national average, mainly because local labor runs at an index of 1.14 relative to the US average. and the local Roofing permit costs about $325.
Do I need a permit for tile roof installation in Park Slope?
In Park Slope, this usually needs a Roofing permit (around $325). The estimate above already accounts for it.
What affects tile roof installation cost the most?
In plain terms, installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates. The biggest drivers are equipment/material grade, the size and complexity of your home, local labor rates, and your climate zone (cold).
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national tile roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Park Slope using the BLS metro wage data labor index (×1.14 here), the IECC cold-climate factor (×1) and a typical local permit fee (≈$325). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Park Slope tile roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Tile roof installation alternatives in Park Slope
Homeowners in Park Slope often pair this with
A tile roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Park Slope
Browse local 2026 costs for every home project in Park Slope, NY.