Roofing · Medford, MA
How much does tile roof installation cost in Medford, MA? (2026)
In Medford, tile roof installation runs $12,300–$28,800, with most paying around $20,550 — about 16% above the national average. Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $20,550
- Typical cost
- $20,550
- Labor vs US
- +12%
- Climate
- Cold
- Local permit
- $325
Refine your estimate
Tune it to your home to narrow the tile roof installation range.
Key takeaways for Medford
- Most Medford homeowners land around $20,550 for tile roof installation, within a $12,300–$28,800 range that sits about 16% above the national average.
- Medford labor runs +12% versus the US average — the main reason the local price differs from the national figure.
- A Roofing permit in Medford runs about $325 — it's already folded into the estimate above.
- A well-installed job here typically lasts 50–100 years — plan the next replacement instead of waiting for an emergency one.
- Time it right and you can save 5–10%: the best window to book is Late spring to early fall (dry, 45–85°F).
What goes into the price in Medford
A typical Medford tile roof installation of $20,550 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Medford 2026 range |
|---|---|
| Materials & equipmentUnit, materials and supplies — priced close to the national level. | $4,800 – $11,400 |
| Labor & installationInstall crew, removal and startup — the part local rates move most. | $7,175 – $17,075 |
| Permit & feesTypical local Roofing permit, scaled to this metro. | $325 |
| Total installed cost | $12,300 – $28,800 |
Split from the Medford estimate using a 60% local-labor share; line items sum to the total.
Why tile roof installation costs what it does in Medford
- Medford's labor rates sit about 12% higher than the national average (based on price levels for the Boston-Cambridge-Newton metro area), pushing the price up.
- A Roofing permit in Medford costs around $325, included above.
Tile Roof Installation cost by roof size in Medford
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| roof size | Medford 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,300 – $16,300 |
| 1,500 sq ft (15 squares) | $10,600 – $22,000 |
| 2,000 sq ft (20 squares) | $12,300 – $28,800 |
| 2,500 sq ft (25 squares) | $15,150 – $34,500 |
| 3,000+ sq ft (30 squares) | $18,550 – $41,350 |
National size ranges localized to Medford labor and climate.
Tile Roof Installation cost by type in Medford
| Concrete tile | $12,300 – $24,250 |
| Clay / terracotta tile | $16,300 – $32,250 |
| Slate | $23,100 – $57,300 |
Adjusted to Medford from national type-level ranges.
Tile Roof Installation cost by efficiency in Medford
Concrete is the affordable workhorse; clay (terracotta) holds its color and resists fade in hot, sunny climates; slate is the premium natural-stone option with the longest life.
| Concrete tileLowest-cost tile; heavy; ~50 yr life | $12,300 – $23,100 |
| Clay / terracotta tileFade-resistant, ideal in hot/coastal climates; 50–100 yr | $16,300 – $28,800 |
| Natural slatePremium stone; 75–100+ yr life | $23,100 – $51,600 |
Labor vs. materials in Medford
Install crew, removal, permit & startup — the part Medford rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $20,550 Medford project; your mix varies with scope.
Skilled installers in the Boston-Cambridge-Newton area earn about $38.4/hr (23% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your tile roof installation cost.
How we estimate it
| National range | $10,500 – $25,000 |
| Medford labor adjustment | ×1.14 |
| cold climate factor | ×1 |
| Local permit | +$325 |
| Medford estimate | $12,300 – $28,800 |
Promo prices vs. the real cost
Storm-season ads push low headline prices — confirm scope before you compare:
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
- Free roof inspection$0 — it's a sales visit
Additional tile roof installation costs to budget for
Expect a few of these rather than all. Which ones apply tracks with access, hidden damage and local code.
| Tear-off & disposal of old roofTile is heavy — disposal costs more than asphalt | $1,000 – $4,000 |
| Structural reinforcement for tile weightOften required; tile is much heavier than asphalt | $1,000 – $10,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-grade, replaced mid-life)Underlayment wears out before the tile and is re-done | $500 – $2,500 |
| Flashing, valleys & ridge work | $500 – $2,500 |
| Permit | $200 – $600 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Tear-off and structural check
- Reinforced underlayment and battens
- Concrete or clay tiles
- Labor, cleanup and permit
What affects the cost
- Specialty flashing and ridge work
- Roof structure may need reinforcement for tile weight
- Concrete vs clay tile
- Pitch, complexity and hip/valley count
Ways to save on tile roof installation in Medford
- Confirm framing can carry the load before buying
- Reuse intact tiles where possible on repairs
- Tiles last 50+ years — strong lifetime value
- Concrete tile costs less than clay with similar life
How long does tile roof installation last in Medford?
Concrete tile lasts ~50 years; clay and slate 75–100+. The underlayment beneath is usually replaced once mid-life.
Inspect for cracked or slipped tiles and clear debris; the bigger periodic cost is replacing worn underlayment.
Signs you need tile roof installation in Medford
- Cracked, chipped, or broken tiles after hail, foot traffic, or freeze-thaw
- Slipped or missing tiles leaving gaps in the field
- Leaks or attic moisture pointing to failed underlayment beneath sound tiles
- Efflorescence, deep staining, or flaking on the tile surface
- Sagging areas — a sign the structure is straining under the weight
- Failed flashing in valleys or around penetrations
Repair or replace in Medford?
Repair if…
- Only a handful of tiles are cracked or slipped
- The underlayment is still sound and leaks are isolated
- Flashing has failed but tiles and structure are fine
Replace if…
- The underlayment has failed across the roof (consider a lift-and-relay first)
- Widespread tile cracking or fading from age or hail
- The roof structure is sagging or can't support the load
Cost calculator
Roof cost by material in Medford, MA
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Medford, MA labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $8,000–$13,700 | $400/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $9,100–$18,250 | $550/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $20,500–$36,500 | $500/yr |
Clay / concrete tileThis page Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $22,800–$45,600 | $550/yr |
Per-square ranges are national installed benchmarks localized to Medford, MA labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for tile roof installation in Medford
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Why tile roof installation quotes vary — and how to compare them fairly
A wide spread between bids rarely means someone is overcharging; it usually means they priced different work. Below is what moves the number and how to line the quotes up.
Why a quote looks high (or low)
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
Get an apples-to-apples bid
- Ask how deck/sheathing repairs are priced if rot is found.
- Specify tear-off vs. overlay so all bids match.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Compare the workmanship warranty, not just the material warranty.
Questions to ask Medford Roofing pros
Quotes only compare cleanly when every bidder is pricing the same work — put these to each of them before you commit.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Tile Roof Installation in Medford
How much does tile roof installation cost in Medford, MA?
The low end sits near $12,300 and the high end near $28,800 for tile roof installation in Medford this 2026, with $20,550 the common middle. The figure is adjusted for local labor rates, cold-climate factors and permit fees.
Is tile roof installation more expensive in Medford than average?
Labor is the biggest lever here: at an index of 1.14 versus the US average, Medford ends up about 16% higher than the national average.; add in a Roofing permit at roughly $325.
Do I need a permit for tile roof installation in Medford?
In Medford, this usually needs a Roofing permit (around $325). The estimate above already accounts for it.
What affects tile roof installation cost the most?
Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates. That's the baseline — the price moves from there. Your cold climate zone plays a part, but equipment/material grade, the size and complexity of the home, and local labor rates weigh in just as heavily.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national tile roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Medford using the BLS metro wage data labor index (×1.14 here), the IECC cold-climate factor (×1) and a typical local permit fee (≈$325). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Medford tile roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Tile roof installation alternatives in Medford
Homeowners in Medford often pair this with
A tile roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Medford
Browse local 2026 costs for every home project in Medford, MA.