Roofing · Grand Forks, ND
How much does tile roof installation cost in Grand Forks, ND? (2026)
In Grand Forks, tile roof installation runs $9,950–$23,300, with most paying around $16,650 — about 6% below the national average. Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $16,650
- Typical cost
- $16,650
- Labor vs US
- −13%
- Climate
- Cold
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the tile roof installation range.
Key takeaways for Grand Forks
- A tile roof installation in Grand Forks typically runs $9,950–$23,300, with most homeowners paying about $16,650 — about 6% below the national average.
- Grand Forks labor runs −13% versus the US average — the main reason the local price differs from the national figure.
- Budget about $250 for the local Roofing permit; it's already included above.
- Service life runs 50–100 years on average; replacing on your schedule beats replacing on an emergency one.
- Cheapest time to buy: Late spring to early fall (dry, 45–85°F) — roughly 5–10% off peak-season pricing.
What goes into the price in Grand Forks
A typical Grand Forks tile roof installation of $16,650 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Grand Forks 2026 range |
|---|---|
| Materials & equipmentHardware and supplies for the job; national pricing applies almost everywhere you go. | $3,900 – $9,200 |
| Labor & installationLabor to remove the old system and install the new one — this is where your city's wage index shows up. | $5,800 – $13,850 |
| Permit & feesThe Roofing permit fee for this metro, based on local rates. | $250 |
| Total installed cost | $9,950 – $23,300 |
Split from the Grand Forks estimate using a 60% local-labor share; line items sum to the total.
Why tile roof installation costs what it does in Grand Forks
- Labor in Grand Forks runs about 13% below the national average (based on price levels for the Grand Forks metro area), which lowers the installed price.
- Grand Forks's Roofing permit runs roughly $250, which is already part of the number above.
Tile Roof Installation cost by roof size in Grand Forks
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| roof size | Grand Forks 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $6,700 – $13,150 |
| 1,500 sq ft (15 squares) | $8,550 – $17,750 |
| 2,000 sq ft (20 squares) | $9,950 – $23,300 |
| 2,500 sq ft (25 squares) | $12,250 – $27,900 |
| 3,000+ sq ft (30 squares) | $15,000 – $33,450 |
National size ranges localized to Grand Forks labor and climate.
Tile Roof Installation cost by type in Grand Forks
| Concrete tile | $9,900 – $19,550 |
| Clay / terracotta tile | $13,150 – $26,000 |
| Slate | $18,650 – $46,250 |
Adjusted to Grand Forks from national type-level ranges.
Tile Roof Installation cost by efficiency in Grand Forks
Concrete is the affordable workhorse; clay (terracotta) holds its color and resists fade in hot, sunny climates; slate is the premium natural-stone option with the longest life.
| Concrete tileLowest-cost tile; heavy; ~50 yr life | $9,950 – $18,700 |
| Clay / terracotta tileFade-resistant, ideal in hot/coastal climates; 50–100 yr | $13,150 – $23,300 |
| Natural slatePremium stone; 75–100+ yr life | $18,700 – $41,750 |
Labor vs. materials in Grand Forks
Install crew, removal, permit & startup — the part Grand Forks rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $16,650 Grand Forks project; your mix varies with scope.
How we estimate it
| National range | $10,500 – $25,000 |
| Grand Forks labor adjustment | ×0.92 |
| cold climate factor | ×1 |
| Local permit | +$250 |
| Grand Forks estimate | $9,950 – $23,300 |
Promo prices vs. the real cost
A low per-square roofing number in an ad means little until you know what scope it covers. Set these marketing figures against the real estimate above:
- Per-square teaser priceadvertised low; varies by pitch & material
- Free roof inspection$0 — it's a sales visit
- Financing offers$0 down · low APR
Additional tile roof installation costs to budget for
These hit some bids and skip others. The deciding factors are your home's condition, layout and what the crew finds once work begins.
| Tear-off & disposal of old roofTile is heavy — disposal costs more than asphalt | $1,000 – $4,000 |
| Structural reinforcement for tile weightOften required; tile is much heavier than asphalt | $1,000 – $10,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-grade, replaced mid-life)Underlayment wears out before the tile and is re-done | $500 – $2,500 |
| Flashing, valleys & ridge work | $500 – $2,500 |
| Permit | $200 – $600 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Reinforced underlayment and battens
- Labor, cleanup and permit
- Tear-off and structural check
- Concrete or clay tiles
What affects the cost
- Pitch, complexity and hip/valley count
- Roof structure may need reinforcement for tile weight
- Specialty flashing and ridge work
- Concrete vs clay tile
Ways to save on tile roof installation in Grand Forks
- Concrete tile costs less than clay with similar life
- Tiles last 50+ years — strong lifetime value
- Reuse intact tiles where possible on repairs
- Confirm framing can carry the load before buying
How long does tile roof installation last in Grand Forks?
Concrete tile lasts ~50 years; clay and slate 75–100+. The underlayment beneath is usually replaced once mid-life.
Inspect for cracked or slipped tiles and clear debris; the bigger periodic cost is replacing worn underlayment.
Signs you need tile roof installation in Grand Forks
- Cracked, chipped, or broken tiles after hail, foot traffic, or freeze-thaw
- Slipped or missing tiles leaving gaps in the field
- Leaks or attic moisture pointing to failed underlayment beneath sound tiles
- Efflorescence, deep staining, or flaking on the tile surface
- Sagging areas — a sign the structure is straining under the weight
- Failed flashing in valleys or around penetrations
Repair or replace in Grand Forks?
Repair if…
- Only a handful of tiles are cracked or slipped
- The underlayment is still sound and leaks are isolated
- Flashing has failed but tiles and structure are fine
Replace if…
- The underlayment has failed across the roof (consider a lift-and-relay first)
- Widespread tile cracking or fading from age or hail
- The roof structure is sagging or can't support the load
Cost calculator
Roof cost by material in Grand Forks, ND
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Grand Forks, ND labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,450–$11,050 | $300/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,350–$14,700 | $450/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $16,550–$29,450 | $400/yr |
Clay / concrete tileThis page Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $18,400–$36,800 | $450/yr |
Per-square ranges are national installed benchmarks localized to Grand Forks, ND labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for tile roof installation in Grand Forks
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Why tile roof installation quotes vary — and how to compare them fairly
One bid high, one low, same house? The variable is scope. Here's what pushes the figure up or down and how to get quotes you can actually compare.
Why a quote looks high (or low)
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
Get an apples-to-apples bid
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Ask how deck/sheathing repairs are priced if rot is found.
- Specify tear-off vs. overlay so all bids match.
- Verify the contractor is licensed, insured and local, with recent references.
Questions to ask Grand Forks Roofing pros
Before you pick, make each contractor answer the same things — gaps in their replies tell you as much as the price.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Tile Roof Installation in Grand Forks
How much does tile roof installation cost in Grand Forks, ND?
Grand Forks's going rate for tile roof installation is $9,950–$23,300 in 2026, with $16,650 the number most homeowners end up paying. We localize this using Grand Forks's labor rates, cold-climate adjustments and permit fees — no separate math needed.
Is tile roof installation more expensive in Grand Forks than average?
Compared with the rest of the country, Grand Forks runs about 6% lower than the national average — local labor prices at an index of 0.92 against the US average., with the local Roofing permit adding roughly $250.
Do I need a permit for tile roof installation in Grand Forks?
Yes — Grand Forks typically requires a Roofing permit for this job, running about $250. That cost is already folded into the estimate above.
What affects tile roof installation cost the most?
Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates. Where two homes diverge is in the details below. Your cold climate zone plays a part, but equipment/material grade, the size and complexity of the home, and local labor rates weigh in just as heavily.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national tile roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Grand Forks using the BEA Regional Price Parity labor index (×0.92 here), the IECC cold-climate factor (×1) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Grand Forks tile roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Tile roof installation alternatives in Grand Forks
Homeowners in Grand Forks often pair this with
A tile roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Grand Forks
Browse local 2026 costs for every home project in Grand Forks, ND.