Roofing · Gillette, WY
How much does tile roof installation cost in Gillette, WY? (2026)
In Gillette, tile roof installation runs $10,000–$23,450, with most paying around $16,750 — about 6% below the national average. Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $16,750
- Typical cost
- $16,750
- Labor vs US
- −12%
- Climate
- Cold
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the tile roof installation range.
Key takeaways for Gillette
- $10,000 on the low end, $23,450 on the high — tile roof installation in Gillette averages $16,750, about 6% below the national average.
- Gillette labor runs −12% versus the US average — the main reason the local price differs from the national figure.
- The estimate already covers the Roofing permit — roughly $250 in Gillette.
- Expect 50–100 years of service, so planning a replacement beats a full-price emergency call.
- Roughly 5–10% comes off when you book in Late spring to early fall (dry, 45–85°F) instead of peak season.
What goes into the price in Gillette
A typical Gillette tile roof installation of $16,750 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Gillette 2026 range |
|---|---|
| Materials & equipmentUnit, materials and supplies — priced close to the national level. | $3,900 – $9,300 |
| Labor & installationLabor to remove the old system and install the new one — this is where your city's wage index shows up. | $5,850 – $13,900 |
| Permit & feesLocal building-department fee for Roofing work here. | $250 |
| Total installed cost | $10,000 – $23,450 |
Split from the Gillette estimate using a 60% local-labor share; line items sum to the total.
Why tile roof installation costs what it does in Gillette
- Expect labor here to run 12% below the national norm — that's what lowers the total.
- Budget about $250 for the local Roofing permit in Gillette — already folded into the estimate above.
Tile Roof Installation cost by roof size in Gillette
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| roof size | Gillette 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $6,750 – $13,250 |
| 1,500 sq ft (15 squares) | $8,600 – $17,900 |
| 2,000 sq ft (20 squares) | $10,000 – $23,450 |
| 2,500 sq ft (25 squares) | $12,300 – $28,100 |
| 3,000+ sq ft (30 squares) | $15,100 – $33,650 |
National size ranges localized to Gillette labor and climate.
Tile Roof Installation cost by type in Gillette
| Concrete tile | $10,000 – $19,800 |
| Clay / terracotta tile | $13,250 – $26,300 |
| Slate | $18,850 – $46,750 |
Adjusted to Gillette from national type-level ranges.
Tile Roof Installation cost by efficiency in Gillette
Concrete is the affordable workhorse; clay (terracotta) holds its color and resists fade in hot, sunny climates; slate is the premium natural-stone option with the longest life.
| Concrete tileLowest-cost tile; heavy; ~50 yr life | $10,000 – $18,800 |
| Clay / terracotta tileFade-resistant, ideal in hot/coastal climates; 50–100 yr | $13,250 – $23,450 |
| Natural slatePremium stone; 75–100+ yr life | $18,800 – $42,000 |
Labor vs. materials in Gillette
Install crew, removal, permit & startup — the part Gillette rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $16,750 Gillette project; your mix varies with scope.
How we estimate it
| National range | $10,500 – $25,000 |
| Gillette labor adjustment | ×0.93 |
| cold climate factor | ×1 |
| Local permit | +$250 |
| Gillette estimate | $10,000 – $23,450 |
Promo prices vs. the real cost
Storm-season ads push low headline prices — confirm scope before you compare:
- Per-square teaser priceadvertised low; varies by pitch & material
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
Additional tile roof installation costs to budget for
Expect a few of these rather than all. Which ones apply tracks with access, hidden damage and local code.
| Tear-off & disposal of old roofTile is heavy — disposal costs more than asphalt | $1,000 – $4,000 |
| Structural reinforcement for tile weightOften required; tile is much heavier than asphalt | $1,000 – $10,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-grade, replaced mid-life)Underlayment wears out before the tile and is re-done | $500 – $2,500 |
| Flashing, valleys & ridge work | $500 – $2,500 |
| Permit | $200 – $600 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Concrete or clay tiles
- Labor, cleanup and permit
- Tear-off and structural check
- Reinforced underlayment and battens
What affects the cost
- Specialty flashing and ridge work
- Roof structure may need reinforcement for tile weight
- Pitch, complexity and hip/valley count
- Concrete vs clay tile
Ways to save on tile roof installation in Gillette
- Reuse intact tiles where possible on repairs
- Concrete tile costs less than clay with similar life
- Tiles last 50+ years — strong lifetime value
- Confirm framing can carry the load before buying
How long does tile roof installation last in Gillette?
Concrete tile lasts ~50 years; clay and slate 75–100+. The underlayment beneath is usually replaced once mid-life.
Inspect for cracked or slipped tiles and clear debris; the bigger periodic cost is replacing worn underlayment.
Signs you need tile roof installation in Gillette
- Cracked, chipped, or broken tiles after hail, foot traffic, or freeze-thaw
- Slipped or missing tiles leaving gaps in the field
- Leaks or attic moisture pointing to failed underlayment beneath sound tiles
- Efflorescence, deep staining, or flaking on the tile surface
- Sagging areas — a sign the structure is straining under the weight
- Failed flashing in valleys or around penetrations
Repair or replace in Gillette?
Repair if…
- Only a handful of tiles are cracked or slipped
- The underlayment is still sound and leaks are isolated
- Flashing has failed but tiles and structure are fine
Replace if…
- The underlayment has failed across the roof (consider a lift-and-relay first)
- Widespread tile cracking or fading from age or hail
- The roof structure is sagging or can't support the load
Cost calculator
Roof cost by material in Gillette, WY
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Gillette, WY labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,500–$11,150 | $300/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,450–$14,900 | $450/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $16,750–$29,750 | $400/yr |
Clay / concrete tileThis page Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $18,600–$37,200 | $450/yr |
Per-square ranges are national installed benchmarks localized to Gillette, WY labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for tile roof installation in Gillette
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Why tile roof installation quotes vary — and how to compare them fairly
One bid high, one low, same house? The variable is scope. Here's what pushes the figure up or down and how to get quotes you can actually compare.
Why a quote looks high (or low)
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
Get an apples-to-apples bid
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Ask how deck/sheathing repairs are priced if rot is found.
- Compare the workmanship warranty, not just the material warranty.
- Specify tear-off vs. overlay so all bids match.
Questions to ask Gillette Roofing pros
You can't judge bids side by side unless they cover the same ground; run through these with every pro on your list.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Tile Roof Installation in Gillette
How much does tile roof installation cost in Gillette, WY?
Expect to pay $10,000 to $23,450 for tile roof installation in Gillette in 2026 — most quotes cluster around $16,750. Why that specific number? It reflects Gillette labor rates, cold-climate demands and permit fees rather than a flat national figure.
Is tile roof installation more expensive in Gillette than average?
Yes — Gillette is about 6% lower than the national average, largely a function of local labor pricing at 0.93× the US average., plus a local Roofing permit running about $250.
Do I need a permit for tile roof installation in Gillette?
In Gillette, this usually needs a Roofing permit (around $250). The estimate above already accounts for it.
What affects tile roof installation cost the most?
Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates. From there, a handful of specifics push the final number up or down. Expect equipment/material grade, home size and complexity, local labor rates and the cold climate zone to matter most here.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national tile roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Gillette using the BEA Regional Price Parity labor index (×0.93 here), the IECC cold-climate factor (×1) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote. Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Gillette tile roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Tile roof installation alternatives in Gillette
Homeowners in Gillette often pair this with
A tile roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Gillette
Browse local 2026 costs for every home project in Gillette, WY.