Roofing · Biloxi, MS
How much does tile roof installation cost in Biloxi, MS? (2026)
In Biloxi, tile roof installation runs $10,550–$24,750, with most paying around $17,650 — about 1% below the national average. Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $17,650
- Typical cost
- $17,650
- Labor vs US
- −11%
- Climate
- Hot
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the tile roof installation range.
Key takeaways for Biloxi
- Priced about 1% below the national average, tile roof installation in Biloxi spans $10,550 to $24,750 — figure $17,650 for a standard job.
- Running −11% against the US average, Biloxi labor is what moves this price off the national figure.
- The estimate already covers the Roofing permit — roughly $250 in Biloxi.
- Count on 50–100 years from a solid install; timing the next job yourself avoids the emergency premium.
- Cheapest time to buy: Late spring to early fall (dry, 45–85°F) — roughly 5–10% off peak-season pricing.
What goes into the price in Biloxi
A typical Biloxi tile roof installation of $17,650 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Biloxi 2026 range |
|---|---|
| Materials & equipmentThe unit and materials — largely the same cost no matter which city you're in. | $4,100 – $9,800 |
| Labor & installationLabor to remove the old system and install the new one — this is where your city's wage index shows up. | $6,200 – $14,700 |
| Permit & feesRoofing permit cost, adjusted to this city's rate. | $250 |
| Total installed cost | $10,550 – $24,750 |
Split from the Biloxi estimate using a 60% local-labor share; line items sum to the total.
Why tile roof installation costs what it does in Biloxi
- Biloxi's labor rates sit about 11% lower than the national average (based on price levels for the Gulfport-Biloxi metro area), pushing the price down.
- Biloxi's hot climate increases typical tile roof installation cost by about 5% versus a neutral climate.
- Budget about $250 for the local Roofing permit in Biloxi — already folded into the estimate above.
Tile Roof Installation cost by roof size in Biloxi
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| roof size | Biloxi 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $7,100 – $14,000 |
| 1,500 sq ft (15 squares) | $9,100 – $18,900 |
| 2,000 sq ft (20 squares) | $10,550 – $24,750 |
| 2,500 sq ft (25 squares) | $13,000 – $29,650 |
| 3,000+ sq ft (30 squares) | $15,950 – $35,550 |
National size ranges localized to Biloxi labor and climate.
Tile Roof Installation cost by type in Biloxi
| Concrete tile | $10,500 – $20,750 |
| Clay / terracotta tile | $13,900 – $27,600 |
| Slate | $19,800 – $49,100 |
Adjusted to Biloxi from national type-level ranges.
Tile Roof Installation cost by efficiency in Biloxi
Concrete is the affordable workhorse; clay (terracotta) holds its color and resists fade in hot, sunny climates; slate is the premium natural-stone option with the longest life.
| Concrete tileLowest-cost tile; heavy; ~50 yr life | $10,550 – $19,850 |
| Clay / terracotta tileFade-resistant, ideal in hot/coastal climates; 50–100 yr | $14,000 – $24,750 |
| Natural slatePremium stone; 75–100+ yr life | $19,850 – $44,400 |
Labor vs. materials in Biloxi
Install crew, removal, permit & startup — the part Biloxi rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $17,650 Biloxi project; your mix varies with scope.
How we estimate it
| National range | $10,500 – $25,000 |
| Biloxi labor adjustment | ×0.93 |
| hot climate factor | ×1.05 |
| Local permit | +$250 |
| Biloxi estimate | $10,550 – $24,750 |
Promo prices vs. the real cost
Storm-season ads push low headline prices — confirm scope before you compare:
- Free roof inspection$0 — it's a sales visit
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
Additional tile roof installation costs to budget for
Expect a few of these rather than all. Which ones apply tracks with access, hidden damage and local code.
| Tear-off & disposal of old roofTile is heavy — disposal costs more than asphalt | $1,000 – $4,000 |
| Structural reinforcement for tile weightOften required; tile is much heavier than asphalt | $1,000 – $10,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-grade, replaced mid-life)Underlayment wears out before the tile and is re-done | $500 – $2,500 |
| Flashing, valleys & ridge work | $500 – $2,500 |
| Permit | $200 – $600 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Labor, cleanup and permit
- Tear-off and structural check
- Reinforced underlayment and battens
- Concrete or clay tiles
What affects the cost
- Pitch, complexity and hip/valley count
- Roof structure may need reinforcement for tile weight
- Concrete vs clay tile
- Specialty flashing and ridge work
Ways to save on tile roof installation in Biloxi
- Confirm framing can carry the load before buying
- Concrete tile costs less than clay with similar life
- Tiles last 50+ years — strong lifetime value
- Reuse intact tiles where possible on repairs
How long does tile roof installation last in Biloxi?
Concrete tile lasts ~50 years; clay and slate 75–100+. The underlayment beneath is usually replaced once mid-life.
Inspect for cracked or slipped tiles and clear debris; the bigger periodic cost is replacing worn underlayment.
Signs you need tile roof installation in Biloxi
- Cracked, chipped, or broken tiles after hail, foot traffic, or freeze-thaw
- Slipped or missing tiles leaving gaps in the field
- Leaks or attic moisture pointing to failed underlayment beneath sound tiles
- Efflorescence, deep staining, or flaking on the tile surface
- Sagging areas — a sign the structure is straining under the weight
- Failed flashing in valleys or around penetrations
Repair or replace in Biloxi?
Repair if…
- Only a handful of tiles are cracked or slipped
- The underlayment is still sound and leaks are isolated
- Flashing has failed but tiles and structure are fine
Replace if…
- The underlayment has failed across the roof (consider a lift-and-relay first)
- Widespread tile cracking or fading from age or hail
- The roof structure is sagging or can't support the load
Cost calculator
Roof cost by material in Biloxi, MS
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Biloxi, MS labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,500–$11,150 | $300/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,450–$14,900 | $450/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $16,750–$29,750 | $400/yr |
Clay / concrete tileThis page Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $18,600–$37,200 | $450/yr |
Per-square ranges are national installed benchmarks localized to Biloxi, MS labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for tile roof installation in Biloxi
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Why tile roof installation quotes vary — and how to compare them fairly
A wide spread between bids rarely means someone is overcharging; it usually means they priced different work. Below is what moves the number and how to line the quotes up.
Why a quote looks high (or low)
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
Get an apples-to-apples bid
- Compare the workmanship warranty, not just the material warranty.
- Ask how deck/sheathing repairs are priced if rot is found.
- Verify the contractor is licensed, insured and local, with recent references.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
Questions to ask Biloxi Roofing pros
A fair comparison starts with identical questions. Ask each contractor the following before anything gets signed.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Tile Roof Installation in Biloxi
How much does tile roof installation cost in Biloxi, MS?
The low end sits near $10,550 and the high end near $24,750 for tile roof installation in Biloxi this 2026, with $17,650 the common middle. Why that specific number? It reflects Biloxi labor rates, hot-climate demands and permit fees rather than a flat national figure.
Is tile roof installation more expensive in Biloxi than average?
Because local labor indexes at 0.93 relative to the US average, Biloxi settles in about 1% lower than the national average.; add in a Roofing permit at roughly $250.
Do I need a permit for tile roof installation in Biloxi?
Expect to pull a Roofing permit in Biloxi — about $250 — which is already built into the estimate above, not an extra charge.
What affects tile roof installation cost the most?
In plain terms, installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates. The biggest drivers are equipment/material grade, the size and complexity of your home, local labor rates, and your climate zone (hot).
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national tile roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Biloxi using the BEA Regional Price Parity labor index (×0.93 here), the IECC hot-climate factor (×1.05) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Biloxi tile roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Tile roof installation alternatives in Biloxi
Homeowners in Biloxi often pair this with
A tile roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Biloxi
Browse local 2026 costs for every home project in Biloxi, MS.