Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits

Roofing · St. Louis Park, MN

How much does metal roof installation cost in St. Louis Park, MN? (2026)

In St. Louis Park, metal roof installation runs $15,250$34,850, with most paying around $25,050about 17% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.

Updated June 2026 · Localized estimate, not a quote

St. Louis Park · 2026 estimate
$15,250 $34,850

Most homeowners pay around $25,050

$15,250typical $25,050$34,850
Typical cost
$25,050
Labor vs US
+3%
Climate
Cold
Local permit
$300

Refine your estimate

Tune it to your home to narrow the metal roof installation range.

2,000 sq ft
800 sq ft4,500 sq ft
Quality tier
Conditions & add-ons
Your adjusted estimate
$15,250 $34,850
Most likely $25,050

Key takeaways for St. Louis Park

  • Expect $15,250 to $34,850 for metal roof installation in St. Louis Park; most quotes cluster near $25,050, about 17% above the national average.
  • Running +3% against the US average, St. Louis Park labor is what moves this price off the national figure.
  • Around $300 of the range above goes to the local Roofing permit, not an extra line item.
  • A well-installed job here typically lasts 40–70 years — plan the next replacement instead of waiting for an emergency one.
  • Roughly 5–10% comes off when you book in Late spring to early fall (dry, 45–85°F) instead of peak season.
Price breakdown

What goes into the price in St. Louis Park

A typical St. Louis Park metal roof installation of $25,050 breaks down roughly like this — materials priced near the national level, labor set by local rates.

Line itemSt. Louis Park 2026 range
Materials & equipmentThe unit and materials — largely the same cost no matter which city you're in.$6,000 $13,800
Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves.$8,950 $20,750
Permit & feesThe Roofing permit fee for this metro, based on local rates.$300
Total installed cost$15,250 $34,850

Split from the St. Louis Park estimate using a 60% local-labor share; line items sum to the total.

Local factors

Why metal roof installation costs what it does in St. Louis Park

  • St. Louis Park's labor rates sit about 3% higher than the national average (based on price levels for the Minneapolis-St. Paul-Bloomington metro area), pushing the price up.
  • St. Louis Park's cold climate increases typical metal roof installation cost by about 4% versus a neutral climate.
  • A Roofing permit in St. Louis Park costs around $300, included above.
Asphalt shingles need warm days to seal their adhesive strips, so metal roof installation lives or dies on eave protection and a fully sealed underlayment. This is one job where the underlayment spec matters as much as the shingle choice.
By size

Metal Roof Installation cost by roof size in St. Louis Park

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

roof sizeSt. Louis Park 2026 range
1,000 sq ft (10 squares)$9,500 $18,700
1,500 sq ft (15 squares)$12,950 $26,750
2,000 sq ft (20 squares)$15,250 $34,850
2,500 sq ft (25 squares)$18,700 $41,750
3,000+ sq ft (30 squares)$22,150 $48,650

National size ranges localized to St. Louis Park labor and climate.

By type

Metal Roof Installation cost by type in St. Louis Park

Corrugated steel (exposed fastener)$10,700 $21,100
Standing-seam steel$21,100 $40,700
Aluminum$16,450 $32,600
Copper$34,950 $69,550
Zinc$32,600 $63,800

Adjusted to St. Louis Park from national type-level ranges.

By efficiency

Metal Roof Installation cost by efficiency in St. Louis Park

The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.

Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing$9,500 $21,000
Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice$15,250 $34,850
Copper / zinc (specialty)Premium architectural metal; 70+ yr life$29,100 $57,850
Where the money goes

Labor vs. materials in St. Louis Park

Labor (60%)
$15,050

Install crew, removal, permit & startup — the part St. Louis Park rates move most.

Materials (40%)
$10,000

Equipment & materials — priced closer to the national level.

Split based on a typical $25,050 St. Louis Park project; your mix varies with scope.

Skilled installers in the Minneapolis-St. Paul-Bloomington area earn about $36.7/hr (18% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.

Methodology

How we estimate it

National range$13,000 $30,000
St. Louis Park labor adjustment×1.11
cold climate factor×1.04
Local permit+$300
St. Louis Park estimate$15,250 $34,850
Typical 2026
$25,050
Range
$15,250$34,850
Climate
cold
Local permit
$300

Promo prices vs. the real cost

Storm-season ads push low headline prices — confirm scope before you compare:

  • Per-square teaser priceadvertised low; varies by pitch & material
  • Free roof inspection$0 — it's a sales visit
  • Financing offers$0 down · low APR
Hidden costs

Additional metal roof installation costs to budget for

Treat them as possibilities, not certainties — the ones that reach your quote follow your property's age and setup.

Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring$1,000 $3,000
Decking / sheathing repair$500 $3,000
Underlayment (high-temp synthetic)$400 $1,500
Custom flashing, trim & ridge capsMore on complex or steep rooflines$500 $2,500
Snow guards (in snowy regions)$300 $1,500
Permit$150 $500

Typical national add-on ranges; confirm locally during your quote.

What's included

  • Labor, cleanup and permit
  • Underlayment, fasteners and trim
  • Tear-off of the old roof
  • Metal panels or standing-seam system

What affects the cost

  • Metal: steel, aluminum, copper or zinc
  • Panel type (exposed-fastener vs standing seam)
  • Roof complexity and number of penetrations
  • Whether existing roof can be overlaid

Ways to save on metal roof installation in St. Louis Park

  • Some insurers discount metal and impact-rated roofs
  • Compare lifetime cost, not just the install price
  • Steel standing seam balances cost and longevity
  • Metal's 40–70 yr life lowers lifetime cost
Lifespan

How long does metal roof installation last in St. Louis Park?

Expected lifespan
4070 years

Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.

Annual maintenance
$100$400/yr

Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.

When to replace

Signs you need metal roof installation in St. Louis Park

  • Loose, backed-out, or corroded fasteners on exposed-fastener panels
  • Rust spots, especially at seams, edges, or scratches
  • Failed sealant or lifted seams letting water track underneath
  • Loose or damaged flashing around chimneys, valleys, and skylights
  • Dents or panel deformation after hail or fallen limbs
  • Faded or peeling factory finish near the end of its warranty
Decision

Repair or replace in St. Louis Park?

Metal rarely needs full replacement on age alone. Most issues are fastener, sealant, or flashing repairs — replace only when corrosion or structural panel failure is widespread.

Repair if…

  • The problem is loose fasteners, worn sealant, or a single damaged panel
  • Rust is localized and can be treated and resealed
  • Flashing has failed but the panels themselves are sound

Replace if…

  • Corrosion or rust-through is widespread across panels
  • Panels are heavily dented or deformed beyond repair
  • The system is decades old and the protective coating has fully failed

Cost calculator

Roof cost by material in St. Louis Park, MN

Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to St. Louis Park, MN labor; the last column is what each material costs per year of life — often the real deciding number.

MaterialLifespanTotal (20 sq)Per year of life
Architectural asphalt shingle
The default US roof — best cost-per-year for most homes. Wind: up to 130 mph.
2530 yr$7,750$13,300$400/yr
Flat / low-slope (TPO, EPDM)
For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered.
2030 yr$8,900$17,750$550/yr
Standing-seam metalThis page
High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph.
4070 yr$20,000$35,500$500/yr
Clay / concrete tile
Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph.
5075 yr$22,200$44,400$550/yr

Per-square ranges are national installed benchmarks localized to St. Louis Park, MN labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.

Best time to buy

Cheapest time for metal roof installation in St. Louis Park

Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Lock in a spring appointment while roofers are quiet in winter — and if a hailstorm just hit your area, wait a few weeks before calling, since that's peak-price season.
Reading your quotes

Why metal roof installation quotes vary — and how to compare them fairly

When two quotes for one project diverge by thousands, the cause is usually what each one includes, not markup — here's how to read the difference.

Why a quote looks high (or low)

  • Deck repair, underlayment grade and ventilation may or may not be in the price.
  • Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
  • One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.

Get an apples-to-apples bid

  • Compare the workmanship warranty, not just the material warranty.
  • Specify tear-off vs. overlay so all bids match.
  • Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
  • Verify the contractor is licensed, insured and local, with recent references.
Hiring

Questions to ask St. Louis Park Roofing pros

The only honest way to compare is to hold every quote to one checklist. Start with these.

  1. 1Is a full tear-off included, or are you laying over the existing roof?
  2. 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
  3. 3What underlayment, ice-and-water shield, and ventilation are included?
  4. 4Are you licensed and insured here, and can you share recent local references?
  5. 5What's the workmanship warranty, and how does it interact with the material warranty?
FAQ

Metal Roof Installation in St. Louis Park

How much does metal roof installation cost in St. Louis Park, MN?

Budgeting for metal roof installation? In St. Louis Park, 2026 prices land between $15,250 and $34,850, and about $25,050 is the typical outcome. Why that specific number? It reflects St. Louis Park labor rates, cold-climate demands and permit fees rather than a flat national figure.

Is metal roof installation more expensive in St. Louis Park than average?

Put St. Louis Park next to the national picture and it lands about 17% higher than the national average; the labor index of 1.11 explains the bulk of it. — the local Roofing permit, about $300, is part of that too.

Do I need a permit for metal roof installation in St. Louis Park?

A Roofing permit is standard in St. Louis Park for this kind of work, at roughly $300. You won't need to add it on top of the estimate above — it's already there.

What affects metal roof installation cost the most?

Worth knowing first: installing a metal roof — higher upfront cost, long lifespan and strong durability. Four things drive the number more than anything else — equipment/material grade, home size and complexity, local labor, and your cold climate zone.

Editors' roundtable

Where does a smart roofing budget go in 2026?

A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.

The value case

Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.

The do-it-right case

A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

Our take

Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.

Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.

How we calculated this estimate

We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to St. Louis Park using the BLS metro wage data labor index (×1.11 here), the IECC cold-climate factor (×1.04) and a typical local permit fee (≈$300). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.

This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.

By Serhat ÖzçelikReviewed by Costadia EditorialUpdated June 2026Sources: BLS · BEA · IECC · IRS · DSIRE · industry cost data

References & data sources

Our St. Louis Park metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.

  1. Occupational Employment & Wage Statistics (metro wages)U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
  2. Regional Price Parities (state & metro)U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
  3. IECC Climate ZonesU.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
  4. Home Energy Tax Credits (25C / 25D)Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
  5. Database of State Incentives for Renewables & EfficiencyDSIRE — NC State University.State and utility incentive programs by ZIP code.
Compare

Metal roof installation alternatives in St. Louis Park

Full Roofing comparison →
Plan ahead

Homeowners in St. Louis Park often pair this with

A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.

Explore

Other projects in St. Louis Park

Browse local 2026 costs for every home project in St. Louis Park, MN.