Roofing · Racine, WI
How much does metal roof installation cost in Racine, WI? (2026)
In Racine, metal roof installation runs $13,050–$29,750, with most paying around $21,400 — in line with the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $21,400
- Typical cost
- $21,400
- Labor vs US
- −9%
- Climate
- Cold
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Racine
- $13,050 on the low end, $29,750 on the high — metal roof installation in Racine averages $21,400, in line with the national average.
- Local labor in Racine is −9% relative to the national average, which is what pushes this estimate away from the countrywide number.
- Around $250 of the range above goes to the local Roofing permit, not an extra line item.
- Count on 40–70 years from a solid install; timing the next job yourself avoids the emergency premium.
- Skip peak pricing by scheduling in Late spring to early fall (dry, 45–85°F); the shift is worth about 5–10%.
What goes into the price in Racine
A typical Racine metal roof installation of $21,400 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Racine 2026 range |
|---|---|
| Materials & equipmentThe equipment and materials themselves — this part barely shifts by location. | $5,100 – $11,800 |
| Labor & installationLabor to remove the old system and install the new one — this is where your city's wage index shows up. | $7,700 – $17,700 |
| Permit & feesLocal building-department fee for Roofing work here. | $250 |
| Total installed cost | $13,050 – $29,750 |
Split from the Racine estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Racine
- Labor in Racine runs about 9% below the national average (based on price levels for the Racine-Mount Pleasant metro area), which lowers the installed price.
- Racine's cold climate increases typical metal roof installation cost by about 4% versus a neutral climate.
- Budget about $250 for the local Roofing permit in Racine — already folded into the estimate above.
Metal Roof Installation cost by roof size in Racine
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Racine 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,100 – $16,000 |
| 1,500 sq ft (15 squares) | $11,050 – $22,900 |
| 2,000 sq ft (20 squares) | $13,050 – $29,750 |
| 2,500 sq ft (25 squares) | $16,000 – $35,650 |
| 3,000+ sq ft (30 squares) | $18,950 – $41,550 |
National size ranges localized to Racine labor and climate.
Metal Roof Installation cost by type in Racine
| Corrugated steel (exposed fastener) | $9,150 – $18,050 |
| Standing-seam steel | $18,050 – $34,850 |
| Aluminum | $14,100 – $27,900 |
| Copper | $29,900 – $59,550 |
| Zinc | $27,900 – $54,600 |
Adjusted to Racine from national type-level ranges.
Metal Roof Installation cost by efficiency in Racine
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $8,100 – $17,950 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $13,050 – $29,750 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $24,850 – $49,450 |
Labor vs. materials in Racine
Install crew, removal, permit & startup — the part Racine rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $21,400 Racine project; your mix varies with scope.
How we estimate it
| National range | $13,000 – $30,000 |
| Racine labor adjustment | ×0.95 |
| cold climate factor | ×1.04 |
| Local permit | +$250 |
| Racine estimate | $13,050 – $29,750 |
Promo prices vs. the real cost
A low per-square roofing number in an ad means little until you know what scope it covers. Set these marketing figures against the real estimate above:
- Free roof inspection$0 — it's a sales visit
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
Additional metal roof installation costs to budget for
None of these are a given. What you actually pay hinges on the condition of the current system and how hard the site is to work in.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Tear-off of the old roof
- Underlayment, fasteners and trim
- Labor, cleanup and permit
- Metal panels or standing-seam system
What affects the cost
- Panel type (exposed-fastener vs standing seam)
- Metal: steel, aluminum, copper or zinc
- Whether existing roof can be overlaid
- Roof complexity and number of penetrations
Ways to save on metal roof installation in Racine
- Compare lifetime cost, not just the install price
- Some insurers discount metal and impact-rated roofs
- Metal's 40–70 yr life lowers lifetime cost
- Steel standing seam balances cost and longevity
How long does metal roof installation last in Racine?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Racine
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Racine?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Racine, WI
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Racine, WI labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,650–$11,400 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,600–$15,200 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,100–$30,400 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,000–$38,000 | $450/yr |
Per-square ranges are national installed benchmarks localized to Racine, WI labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Racine
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Why metal roof installation quotes vary — and how to compare them fairly
Two contractors can price the same job thousands apart. Almost always it's the scope each assumed — here's what drives the gap and how to close it.
Why a quote looks high (or low)
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
Get an apples-to-apples bid
- Specify tear-off vs. overlay so all bids match.
- Ask how deck/sheathing repairs are priced if rot is found.
- Verify the contractor is licensed, insured and local, with recent references.
- Compare the workmanship warranty, not just the material warranty.
Questions to ask Racine Roofing pros
Level the field before you choose — ask each bidder the same questions and watch how the answers differ.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Racine
How much does metal roof installation cost in Racine, WI?
Expect to pay $13,050 to $29,750 for metal roof installation in Racine in 2026 — most quotes cluster around $21,400. The figure is adjusted for local labor rates, cold-climate factors and permit fees.
Is metal roof installation more expensive in Racine than average?
Yes — Racine is about the same as the national average, largely a function of local labor pricing at 0.95× the US average.; add in a Roofing permit at roughly $250.
Do I need a permit for metal roof installation in Racine?
Expect to pull a Roofing permit in Racine — about $250 — which is already built into the estimate above, not an extra charge.
What affects metal roof installation cost the most?
In plain terms, installing a metal roof — higher upfront cost, long lifespan and strong durability. What should you watch? Equipment or material grade, the home's size and complexity, local labor rates, and your cold climate zone — in roughly that order.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Racine using the BEA Regional Price Parity labor index (×0.95 here), the IECC cold-climate factor (×1.04) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Racine metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Racine
Homeowners in Racine often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Racine
Browse local 2026 costs for every home project in Racine, WI.