Roofing · Lombard, IL
How much does metal roof installation cost in Lombard, IL? (2026)
In Lombard, metal roof installation runs $15,650–$35,700, with most paying around $25,700 — about 20% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $25,700
- Typical cost
- $25,700
- Labor vs US
- +6%
- Climate
- Cold
- Local permit
- $300
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Lombard
- Priced about 20% above the national average, metal roof installation in Lombard spans $15,650 to $35,700 — figure $25,700 for a standard job.
- The +6% gap between Lombard and national labor rates is the single biggest reason this price isn't the national average.
- Permit costs are baked in: Lombard charges about $300 for the Roofing permit.
- 40 to 70 years is the usual service life, so budget for the next one before it fails.
- Cheapest time to buy: Late spring to early fall (dry, 45–85°F) — roughly 5–10% off peak-season pricing.
What goes into the price in Lombard
A typical Lombard metal roof installation of $25,700 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Lombard 2026 range |
|---|---|
| Materials & equipmentThe unit and materials — largely the same cost no matter which city you're in. | $6,150 – $14,150 |
| Labor & installationInstall crew, removal and startup — the part local rates move most. | $9,200 – $21,250 |
| Permit & feesTypical local Roofing permit, scaled to this metro. | $300 |
| Total installed cost | $15,650 – $35,700 |
Split from the Lombard estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Lombard
- Expect labor here to run 6% above the national norm (based on price levels for the Chicago-Naperville-Elgin metro area) — that's what raises the total.
- Because Lombard sits in a cold climate zone, metal roof installation costs run about 4% higher than a neutral-climate baseline.
- Budget about $300 for the local Roofing permit in Lombard — already folded into the estimate above.
Metal Roof Installation cost by roof size in Lombard
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Lombard 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $9,750 – $19,200 |
| 1,500 sq ft (15 squares) | $13,300 – $27,450 |
| 2,000 sq ft (20 squares) | $15,650 – $35,700 |
| 2,500 sq ft (25 squares) | $19,200 – $42,800 |
| 3,000+ sq ft (30 squares) | $22,750 – $49,900 |
National size ranges localized to Lombard labor and climate.
Metal Roof Installation cost by type in Lombard
| Corrugated steel (exposed fastener) | $10,950 – $21,650 |
| Standing-seam steel | $21,650 – $41,800 |
| Aluminum | $16,900 – $33,500 |
| Copper | $35,850 – $71,450 |
| Zinc | $33,500 – $65,500 |
Adjusted to Lombard from national type-level ranges.
Metal Roof Installation cost by efficiency in Lombard
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $9,750 – $21,550 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $15,650 – $35,700 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $29,800 – $59,300 |
Labor vs. materials in Lombard
Install crew, removal, permit & startup — the part Lombard rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $25,700 Lombard project; your mix varies with scope.
Skilled installers in the Chicago-Naperville-Elgin area earn about $38.1/hr (23% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Lombard labor adjustment | ×1.14 |
| cold climate factor | ×1.04 |
| Local permit | +$300 |
| Lombard estimate | $15,650 – $35,700 |
Promo prices vs. the real cost
The prices that fill your mailbox after a hailstorm are built to look cheap, not to describe the job — here's what those advertised figures usually assume:
- Free roof inspection$0 — it's a sales visit
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
Additional metal roof installation costs to budget for
Treat them as possibilities, not certainties — the ones that reach your quote follow your property's age and setup.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Tear-off of the old roof
- Labor, cleanup and permit
- Metal panels or standing-seam system
- Underlayment, fasteners and trim
What affects the cost
- Panel type (exposed-fastener vs standing seam)
- Metal: steel, aluminum, copper or zinc
- Roof complexity and number of penetrations
- Whether existing roof can be overlaid
Ways to save on metal roof installation in Lombard
- Steel standing seam balances cost and longevity
- Compare lifetime cost, not just the install price
- Some insurers discount metal and impact-rated roofs
- Metal's 40–70 yr life lowers lifetime cost
How long does metal roof installation last in Lombard?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Lombard
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Lombard?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Lombard, IL
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Lombard, IL labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $8,000–$13,700 | $400/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $9,100–$18,250 | $550/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $20,500–$36,500 | $500/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $22,800–$45,600 | $550/yr |
Per-square ranges are national installed benchmarks localized to Lombard, IL labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Lombard
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Why metal roof installation quotes vary — and how to compare them fairly
Price differences on an identical job trace back to the assumptions each contractor made; understand those and the 'expensive' bid often turns out fair.
Why a quote looks high (or low)
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
Get an apples-to-apples bid
- Ask how deck/sheathing repairs are priced if rot is found.
- Verify the contractor is licensed, insured and local, with recent references.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Specify tear-off vs. overlay so all bids match.
Questions to ask Lombard Roofing pros
A fair comparison starts with identical questions. Ask each contractor the following before anything gets signed.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Lombard
How much does metal roof installation cost in Lombard, IL?
Expect to pay $15,650 to $35,700 for metal roof installation in Lombard in 2026 — most quotes cluster around $25,700. We localize this using Lombard's labor rates, cold-climate adjustments and permit fees — no separate math needed.
Is metal roof installation more expensive in Lombard than average?
Yes — Lombard is about 20% higher than the national average, largely a function of local labor pricing at 1.14× the US average., before the Roofing permit, which runs about $300.
Do I need a permit for metal roof installation in Lombard?
Most Lombard jurisdictions require a Roofing permit for this work. Budget roughly $300 for the permit; it is already included in the estimate above.
What affects metal roof installation cost the most?
Worth knowing first: installing a metal roof — higher upfront cost, long lifespan and strong durability. The biggest drivers are equipment/material grade, the size and complexity of your home, local labor rates, and your climate zone (cold).
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Lombard using the BLS metro wage data labor index (×1.14 here), the IECC cold-climate factor (×1.04) and a typical local permit fee (≈$300). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote. Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Lombard metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Lombard
Homeowners in Lombard often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Lombard
Browse local 2026 costs for every home project in Lombard, IL.